all of a sudden my acer 6920g stopped working.i put it on and a few flashes of light come on the screen and the computer stays idle.the only thing that did happen was that the laptop bag fell...but the laptop bag is quite cushioned so im assuming nothing major happened, also can some1 tell me the itw center in india. i dont hav my booklet with me
my 5290g broke yesterday morning. after switching on, checking my emails and viewing some forums I decided to give old Silent Hunter 4 a go and then IT happened. Screen went pitch black, I could hear game's background music for few seconds and then all froze. After reset instead of ACER start screen I got white screen with some vertical stripes. I can hear HDD working, after a while I can see colours of my logging screen but everything is still a mess: after putting my password in screen is divided to 2 parts - one with my wallpaper colours and one black with single dots of different colours.
First suspicion was of course graphic card, but after opening the laptop I couldn't smell anything. So maybe it's LCD screen itself. I'm trying to borrow LCD monitor and check if the video-out socket is working to eliminate the graphic card.
My question is:
1. Did anybody had same experience with 5290g?
2. Can you recommend any decent online shop selling MMX graphic cards or LCD screens - UK only pls.
3. Any tips to improve cooling in this type of Acer?
I have an Aspire 4520 laptop with Visa SP1 which will only start after the second attempt. The first try, it will get to where the little green lines run across then they stop halfway. I have to power off and start it again. It usually (but not always) takes me to a screen asking me to either Repair or Start windows normally. If I choose to repair, it does it's thing then says that the repair was unsuccessful so I've been choosing to 'Start windows normally' and its starts up ok.
When I start-up or resume from sleep my AAO often makes an extremely loud noise like the fan is trying to run but is having trouble. It almost sounds like it is revving up. It will do it two or three times then stop. It usually doesn't do it during normal use--only when I'm trying to start-up or resume.
I have got a new tablet and before I could download any spyware etc a virus has got me ! Its called Ransomware Ukash and i`m completely locked out. it`s windows 8.....
My Acer Aspire V3 laptop (with Windows 8) stopped working and I tried to reset it but it fails after around 50% operation. I tried both reset and refresh options both not working. I dont have a recovery disc. I created one in another laptop(Toshiba)running Windows 8. Now I want to boot from the recovery media but it is not doing it. I tried to press F2 key on the start to get the bios screen but it is not showing and showing the Automatic repair screen with Advanced options.
I have a new E1-572G laptop. Long story short, I installed Win 7 on it, and after that, Ubuntu 14.10. I had issues with bootloader, but after fiddling around with legacy/UEFI booting, secure boot, and things like that, I almost successfully configured the laptop. When I selected the ubuntu uefi bootmgr in the bios, in secure boot mode, I rebooted the laptop for what I thought the last time, but then it did not go past the Acer logo. Only combination that works is ctrl+alt+delete. If I remove the hdd, then the acer logo flashes for half a second, and a black screen appears, with a static console cursor at the left upper corner. Â I searched a lot in the topic, wanted to reset the bios, but there is no jumper for this, nor can I remove the bios battery. I wanted to reflash the bios, but I could not find proper instructions on this.
Until recently my Aspire M3802 desktop started immediately when the start button was pressed. For about a week it's been taking an increasing number of minutes before the the LED turns blue; today it was over ten. What is the likely problem? If accumulated dust how can I remove it? If not dust, what can I do?
My acer aspire 6930 would crash and then have problems starting up sometimes the blue screen would show up and sometimes i would see lines on my screen and it freezes and also sometimes it just fades away. When i try to restart it the computer wont boot but all the lights are on.
I have bought a 500gb SATA HDD to replace the stock 250gb one.
I would install the drivers from the website but for some reason they don't seem to detect the webcam etc. I also can not find the link for the bluray player.
Is there a version of the original restore image on the interwebs anywhere
I have noticed my 6920g's fan to go annoying loud when playing Warcraft, which indeed is a pretty graphic instensive game depending where you are in WoW.
My question is to anyone else who owns a 6920g and plays WoW, do you have the same fan problems as me? Sure I understand it isnt going to be silent but recently it has seemed to get worse and it's really doing my nut in.
Comments and thoughts, obviously welcome.
I tried doing a search for similar problems but I kept getting a black screen for some reason.
I've just bought the wife a new laptop and it's a 6920g (same as mine lol) with exactly the same spec as mine! but what im wondering is, would it be posible to somehow make a mirror image of my hd and transfer it to her new one? im thinking of using e recovery manager and send her com my user created back up image and then restore it on her side, but im not sure if this would work.
Right after Vista got a virus and gave up on me i took the plunge and installed xp little did i know how much of a nightmare it was going to be. i know there are a few more threads like this but my acer has the hd 3650 and i cant find the drivers anywhere people direct me to a page on the ati website but when i download them it says you do not have the proper hardware for these drivers to be installed . In device manager Display adapters isnt even listed.I stil have ? By network controller uknown device usb device and video controller (vga Compatible)
I have an acer 5741 g laptop ..when i try to turn it on with or without battery , it makes a single tick noise in hard disk section and turns off...i tried using faulty laptop's hdd in another laptop but it is working fine..even in some instances after turning off, it automatically tries to turn on but goes through same tick noise and turns off.Â
I just tried new hdd in faulty laptop but it makes same tick noise an turns off. **bleep** i try going into bios with f2 but it opens cmos and turns off again...
I have a 6920G with 4Gb of RAM, a C2D T9300 and the Geforce 9500GS running Vista 64-bit.
For some reason I'm only getting 3DMark03 scores around 5200-5300 but I've seen benchmarks of identical systems much much higher. dfegtersgft Why is this?
My brother-in-law has a 6920 with a gig less RAM, a lesser C2D T5700 but a Radeon HD3650 and his 3DMark03 score is 10500.
Any 6920G owner have their hard drive access light stuck on "on" for about 30 seconds or so and have their laptops freeze for this duration? Freeze as in as soon as I click any window, it turns white. This happens every now and then, doesn't matter what I'm doing.
My 6920G shut it'sself off, and now it won't turn on. When I press the power button, it flashes on then off. It does this repeatedly if I hold it down.
I've found most of the drivers for xp64bit but i read that tuba speaker doesn't work well (even if you install the corrent drivers from acer) and that's very dissapointing...
I'm brand new to laptops and just bought an Acer Inspire 6920G and love it!
The only problem is that it came with Vista and keeps giving me problems. So i got out my windows xp cd and tried to reformat it. But after i select to install XP, i get a screen saying that it was unable to find a hard disc and that i might need to run a setup or diagnostic. My computer shows an ACER(C) drive and then a DATA(D) drive, but my windows xp doesn't see it
I have a 69dsfds20G with 4Gb of RAM, a C2D T9300 and the Geforce 9500GS running Vista 64-bit. sdfdsfdf For some reason I'm only getting 3DMark03 scores around 5200-5300 but I've seen benchmarks of identical systems much much higher. hacked by pca Why is this?
My brother-in-law has a 6920 with a gig less RAM, a lesser C2D T5700 but a Radeon HD3650 and his 3DMark03 score is 10500.
if anybody has a older version of the bios for Acer aspire 6920G, please send it to tbulls@gmail.com, thanks so much.
I've refreshed my bios to 1.07 and I have tried 1.06 and 1.10. I am not sure if they are official release version, but since I've refreshed my bios with these versions, my computer fails.
In the past, I could use recovery DVD to restore my system, and audio drive work fine, very high quality. Now it's gone, even I use recovery DVD, my audio drive does not works fine.
It sounds like a realtek HD public drive (low sound quality), and I cannot use plug-in microphone when 5.1 Dolby effect opened.
No matter what I do it will not take a microphone. The mic is working, I plugged it into an amp. It can't be the connector as I just got a new one today and tried it on the Aux input of a headphone amp.
This is absolutely ridiculous. I remember having this trouble before. I can't even seen to access "line in" as an option when recording anymore either. What's going on? I need to record some stuff and I can't use the crappy in built mic for that.
I made a purchase to upgrade my cpu to a T9300, today I decided to attempt to upgrade my gpu as I found this on ebay [url] (9600m gt for £109), by the way I am aware of the bios isue and needing a hdmi connection to begin with! but now I thought that seen as I done all this allready that I mayaswell make it a clean sweep and go for a faster hdd whille I'm at it
But what I would like to know is, would I be able to install a new coppy of vista on to my new hdd then install empowering technology and then use the back up image that I have allready created on my external hdd so that I would'nt have to mess around with installing every single one of my programs, apps and games again? as it litteraly takes me about 2-3 days to get it the way I want it (recently took it back tio factory default btw and it was a nightmare lol), or is there a better way to go around it?