I just recieved my Aspire 8930. But Im having a problem.
While filling out the information for my operating system, it randomly decided to BSOD on me, loading the dump information then going to a black screen. Now when I turn it off and try to turn it on, the hard drive doesnt click on or even blink the little display, neither does the screen flicker on.
Had my Acer Aspire 8930 for 11 months now and I've always assumed it displayed images at 1920 x 1080 because of the blu ray drive and the fact it has a sticker on the front of the laptop which says 'FULL HD 1080 PLAYBACK'.
I've just gone into my display settings and it says 1680 x 945!
That is on the highest setting possible.
The sticker on the side of the box it came in says;
Aspire 8930G - 584G32Bn which according to [url] states at the top in the summary it boasts 1920 x 1080.
How can the sticker on my laptop claim full HD at 1080? Do I have the wrong screen on my laptop or am I missing something?
Every time I start up my computer, it flashes the Dell logo loading screen, and then displays this message on a black screen:Intel UNDI, PXE-2.1 (build 083) Copyright (C) 1997-2000 Intel Corporation.
This Product is covered by one or more of the following patents: US5, 307, 459, US5, 434, 872, US5, 732, 094, US6, 570, 884, US6, 115, 776 and US6, 327, 625Realtek PCIe FE Family Controller Series v1.19 (08/10/09)I tried hitting escape or enter but doesn't work. I ran the diagnostics but shows that everything is fine.
I tried hitting f8 to get into safe mode but again nothing.
Product Name: G62 b90-ev
Operating System: Windows 7
I get black screen after Windows loading, meanwhile everything else works (lights fans hard drive and sound). I tried several things i read on troubleshoot thread, memory diagnosis, hard drive diagnosis, remove and change place the rams, unplug ac and battery and keep the power button for 30secs pressed the plug ac without the battery but nothing. I also tried to use a monitor by hdmi cable but i get a blues creen when i try with the monitor. Also this is happening during a format so i cant even get through safe mode.
Got a new E5-571P-55TL yesterday and going through the setup process I got all the way to where it says downloading apps. It displayed a message that it was processing or I forget what it said exactly. Then the words went away after about an hour. I remember reading that it said it may do this, may have a blank screen and not to turn it off. I left it on all night and still have just a green screen this morning. I know my wifi is not the fastest and figured that's what it was. Came to work today and left it sitting on the counter, still on.
View 4 Replies View Relatedi recently installed vista service pack 1 on my system which is a 64 bit OS! a couple minutes after installing and installed all necessary drivers, i then tried to install the PC game by the name of grid, half way into installation, my laptop shutdown giving me the blue screen that say hardware error and dumping memory.... i tried rebooting a couple time but same blue screen results, so i opened my system and then boot again, i then noticed my fan wasnt running continuously, it runs for a couple seconds then stops and then runagain for another couple seconds and stop, it continuously repeats that step, so i then removed the fan and cleaned out the sponge thick dirt i saw in it, blow out the dust from vents and from heat sink, then i tries booting up again and the fan behaves the same god darn way..... how can i solve this problem do you think weather or not my system is 32 bit or 64 bit, wud it affect the operation of my fan?
View 4 Replies View RelatedI replaced the system board for an Acer Aspire 5552, and noticed that the product information for the machine, IE: Serial Number, SNID, etc are not flashed into the BIOS. The serial number for this is listed just as 123456789. Do any of you know how I can get my information flashed into the BIOS?
View 1 Replies View RelatedMy Acer aspire 5542 stopped working today, there is no bios information or acer splash, just a blank screen, I have tested RAM memory, changed CMOS battery and power supply...
View 3 Replies View Relatedhow can i fix acer aspire V5-572? it turns to blackscreen/blank screen after i've downloaded an application? i turn it off but when i tun it goes still the same..
View 1 Replies View RelatedMy problem is that when i start up my Laptop (its about a week old) i just get a black screen and nothing else. The only way of solving this problem is to take out the power lead and the battery and start it up again. I dont want to have to do this everytime i start up my laptop.
This first happened after my laptop crashed (Frozen screen bussing through speakers) there was a lot running at the time, virus updates, windows updates etc.
just got my replacment 1810tz. last book had some trouble with the keyboard. now the brand new just wont boot up. has some fan blowing and once harddisc access and then nothing. i already tried Fn + F5/F6 keys, no result. also attached via hdmi to monitor - but not any flickering. even let it lay there for some hours wiithout batterypack attached. no result.
how to remove the bios battery, maybe this could solve it...?
I've been experiencing a few issues recently with my Acer Aspire V5 so I did a return to factory settings (Full wipe).
I've come home today and the screen keeps on going black even though the computer isn't asleep. I move the mouse, and I see the desktop again, but then after less than a second, it goes black again.
My aspire s3 screen suddenly goes black. When I connect it to HDMI I can see the display on the HDMI device. When I disconnect HDMI the screen display comes back but again goes black after some time. It is a hardware problem or some settings to be done. This display problem happens when I restart or power on the note book.
View 1 Replies View RelatedMy acer aspire v5 is on black screen. This happened when i forced it to shutdown while a disk check up is on progress, coz it stuck up for about an hour it didn't even move an inch. my function keys are not working.
View 8 Replies View RelatedI've been experiencing a few issues recently with my Acer Aspire V5 so I did a return to factory settings (Full wipe).
I've come home today and the screen keeps on going black even though the computer isn't asleep. I move the mouse, and I see the desktop again, but then after less than a second, it goes black again.
There is no screen saver applied. This is probably user error, but how do I resolve without having to take it to the repair shop.
1. Would the QX9300 or Q9200 work in the 8930?
2. Would 6GB RAM work?
3. Would the new Intel 80GB SSD work?
4. Lastly, Is the 8930 an MXM laptop?
I have an Aspire 8920G laptop.
I have Windows Vista Home Premium preinstalled (with no installation nor recovery disks delivered).
I accidently hit the arcade button on the cinedash panel, instead of the power button. The computer started directly up into arcade deluxe, after a short install. Nice feature
I thought, and choose to exit arcade through the exit feature. Then I noticed that the computer prepared to hibernate, but instead it shut off after it finished.
After turning the computer on, a small complaint about improper closing the computer popped up, and I choose to start windows normally. Now the boot loader ran, and when I expected the logon screen, instead I met a black screen with a working mouse cursor. I eventually had to force power down, since crtl alt delete didn't work.
Since then, all boot options, safe mode etc leads to the same black screen.
Vista looks like it's going to boot normally then goes to a black screen with a working mouse pointer. The hard disk light just pulses every couple seconds.
I tried extracting the battery but it doesn't work.
I tried to alt+f10 - Vista Recovery page, so it gives me menu called "Edit Boot Options". There is the path to winload.exe and this:
"Partition: 2
Hard Disk: b8f0ffa4
[ /NOEXECUTE=OPTIN
]"
That's all what I have when I press ALT + F10.
I could type "Enter" = nothing happened
"Esc" = shutdown the system
"F8" = go to recovery page.
Hit f8:
Goes to a "Vista system recovery" or something like that, i'm not quite sure what its name was. Anyway it had about 6 options, including "Get windows to check for and correct the faults on your disk" in a little bit more high tech talk. And "Restore to a earlier point". Since the "Checking and correct faults" said it was recommended, i thought i'd go for that.
It ran its tool, told me to click the restart button. Runs it again, tells me to restart again.
And now it enters its final state - Its virtually dead :|. If i turn it on, it will go to the black screen, that talks about an improper shutdown, with the options for Safe Mode, Safe mode with networking.. etc. Any of these 4 options all result in the same black screen displaying only the mouse cursor.
I was not trying to install or upgrade nothing, was not trying to change form vista to xp or so.
I have not deleted any hidden partition (as far as I know...)
I have a Acer Aspire 6920 with Vista and my screen goes black after i log in I can get to Task manager to open programs and internet sites.
View 4 Replies View RelatedAfter logging in I get stuck in a black screen with cursor. Have tried shift or control with f8 and f12 to get out of this with no success. Understand I may have to reinstall video driver or BIOS?
If I leave laptop on all day it is working by the time I get home from work.
I know I have read several posts about this issue but Cntl+shift+Esc not solving issue. Notebook with black screen upon startup. I hear Windows 7 booting up but have a black screen. Was troubleshooting a monitor issue again when black screen happened.
Aspire 5552,Windows7 home premium..
Purchased in 2009 with free upgrade to Win 8.1 Pro. Has been a great computer up to now. On power up, LED's and fan come on but screen is black. Can not see anything behind screen when shining a torch on it. Has worked twice since fault appeared, once on re-boot and once when pressing DEL key. Replaced battery on motherboard and tried combinations of the two RAM boards. Still not working. Have recovery disks, but they are for the old Vista software.
View 2 Replies View RelatedI have a relatively new Aspire E1-522. Was in the middle of watching Netflix when it conked out. Now, when I turn the power on very little happens...the blue light comes on, the fan comes on and the screen backlight comes on...and then goes out...and then comes on again...etc.
Basically, turning it on doesn't even get to the Acer logo. Cannot get into the BIOS by any means. In my research this sounds exactly like the Aspire One black screen of death, although I haven't found references to it with respect to the E1.
I think the BIOS is fried. How to re-flash it on the E1-522? I cannot boot windows, so I can't use the self-extracting EXE. I need to be able to flash it from the bare bones hardware like the fix for the AA1 ....
I have repaired a few laptop in my time so when a friend said his screen was black but he could read it with a flashlight I guessed right away it was an inverter problem.
I got a new inverter off of *bay, carefully removed the display bezel, swapped in the new inverter and powered it up. Successfully boots into Windows ! Shut it down, screwed the inverter down, put the bezel back on and now the display comes on for 1 second, just long enough to see that "Acer" splash screen, and then goes black. Yes you can still read the screen with a flashlight.
Checked the power in and out wires, they look good. Re-seated both connectors. unscrewed the inverter board from the display so that it is :floating". Nothing. Swapped in the old inverter and it acts the same ?
I have an acer 7513 wsmi the screen went black no backlight. It worked using the blue video cable connected to a TV. I replaced with a new screen now have a backlight but no images etc. still works with TV though. I up put windows 7 on it so it has no acer drivers at all. I have tried alt 5 etc but no joy.
View 1 Replies View RelatedWhen powering up I get the Acer screen for about 10 sec and then black screen. Immediately before this there was a Windows update for the graphics card, if I remember correctly. I have tried hard power down 3 times but on the 4th time I do not get the message "preparing for automatic repair". I am unable to get into Safe Mode.
View 5 Replies View RelatedI have an Acer Aspire One D250 of 2009 that does not work anymore .. Pressing the power button the computer turns on, the cpu fan starts then stops (as usual) but then nothing happen .. black screen, no error beep, hd stopped, no lights turned on ... I tried to remove ram, hd, battery .. nothing. I decides to change the motherboard and I found one identical new sealed. After installation..same problem !!
View 4 Replies View RelatedWhen I turn on my Acer Aspire 4750, the screen just turns black, and I can't do anything but to Force it turn OFF?
View 6 Replies View RelatedSo my Acer Aspire e5 571 which ive been using for about 3 days just had a windows update. Now it starts up fine but I get a black screen once I log in. However some programs are still able to see and popup randomly. I also tried going into my bIOS but it asks for a password which I do not know.
View 9 Replies View RelatedI have an Acer Aspire 5517 that was turning itself off and few weeks ago, which I wrote to the community about. It stays on now, but the screen is black. I was able to update the BIOS before it went black permanently. It does turn on, but nothing comes up on the screen..How do I trouble shoot it, when I can't see anything???
View 9 Replies View RelatedAspire 9410 no operating issues but sometimes when booted only black screen Whenever this happens, I connect an exterior monitor and then the screen on my comp pops back on and will stay on even after I disconnect the exterior. It doesn't do this all the time and will flicker (rarely) when in use but never goes completely out when in use. Anyone know why this is and how I can get rid of this problem permanently (outside of getting another computer!)
View 12 Replies View Related
