Acer :: Aspire 5535 XP Load (hardware Error)
Mar 13, 2009
I just bought an Aspire 5535 and it came with Vista Home Premium. I want to get rid of vista and load XP on it. Problem is I keep getting a hardware error when trying to load XP. I went as far as pulling the HD out of the notebook and hooking it up to my desk top to reformat it, and try it in the notebook at that point, same problem, blue screen f death when it tries to start the windows installation. I then take it out of the note book again and partially load XP up on it from my desktop till the first reboot prompt, re-install it back into the notebook, only to still have the same problem. Is there some hardware issue that needs to be over come here or am I missing something obvious? Or even still, will XP even work on this notebook?
View 9 Replies
ADVERTISEMENT
Oct 22, 2014
I have a "Hive" error message that displays on a blue screen. Windows does not load. Any wa getting this machine going ....
View 2 Replies
View Related
Mar 22, 2010
I have an Acer Aspire 5535 , i pulled the bios battery out from the MB and i reseted the bios that way , now the monitor is blank (black) , the HDD starts , the cooler starts ,
View 11 Replies
View Related
Nov 29, 2008
I bought Acer Aspire 5535. I got Resource dvd with it, and on that dvd are drivers for Windows Xp, Vista 64 and Vista 32.
When I started him for the first time and try Alt + F10 nothing happens, so I decided to format HDD and put XP on it. I changed AHCI in bios (to IDE) and formated the HDD with Windows Xp. Installation of Windows Xp went just fine. It works fine and everything is ok.
I Only thing I don't have on it is EmPowering. I tried to find it on Acer website, but no way
View 10 Replies
View Related
Jan 25, 2015
Is there something i can do to make the light go out? Like I said it's fully charged and the light stays on.
View 3 Replies
View Related
Oct 6, 2014
I have an acre aspire 5535. I cannot login and keep going round in circles with the message which says "the user profile service failed to login. User profile cannot be loaded". I have switched off and opened again but no change.
View 1 Replies
View Related
Dec 14, 2014
5 years ago I purchased an Acer One ZG8 Netbook. I have gotten alot of use although now I am facing a crash with Windows XP not loading. I wanted to do a factory reset and see if there is any hope to keep this older Acer as a back up netbook. After powering up the Acer One,,,Windows XP will not load. I am faced with a black screen offering options:
1.Safe Mode
2. Safe Mode with Networking
3. Safe Mode with Command Prompt
Or Last known good configuration (your most recent settings that worked). Lastly, Start Windows Normally
Finally, it prompts me to use the down arrow keys to choose with a 30 second countdown ticker.
I HAVE tried all the options for weeks and weeks. Just as Window XP loads a blue screen with word flash so quickly I can not possibly read it. I am very very close to letting this older version Acer meet its maker --- although through my ignorance I have realized just maybe I could do some sort of factory reset.
View 1 Replies
View Related
Nov 21, 2008
My 2 yrs old Acer 5500 60 GB HDD crashed ...I replaced it with another new 80 GB HDD...now when I inserted win98 boot disk and typed fdisk its showing only two partions one 2047 MB and another some 8GB . I deleted the partitions and again created but C: partition isnt exceeding 2047 MB and rest 8GB
Anyways I inserted my Acer XP Rescue disks and installed windows ...After booting it says Invalid Partion Table
Now my question is that how do I make Windows recognize the right Hard disk size ie 80 GB and run it successfully
I already installed Ubuntu 8.10 Linux ...working fine ..It recognizes 74GB Hard disk..
View 7 Replies
View Related
Jul 8, 2008
I'm having some problems with my Acer Aspire 5050 AMD Turion 64 2.0 GHz running Windows Vista Home Basic
After using it for a little over a year it suddenly has a CPU load around 75 - 90%, and the mouse is not reacting very well. Besides that, it's almost impossible to use to keyboard. Thinking it might be some sort of virus, I checked for that. I found nothing.
I tried to do a erecovery of the machine, but it didn't help! Now i tried formatting the partition and installed XP instead. But still: it didn't help. the problems is still there.
I found that if i start in fail safe mode, the notebook's working. both mouse , keyboard and cpu load.
I am really baffled about about what's the cause of all my problems. I'm thinking it might be the BIOS that's f***** up, but i'm not shure about it.
View 5 Replies
View Related
Apr 4, 2009
I've noticed my laptop has been running quite hot recently so I downloaded a thing called Speedfan, which tells me my CPU is running at 70-80 degrees C. Isn't this really, REALLY hot for a laptop? I really don't want it to overheat and break
I first noticed it and found that it was maxing out at 82 degrees, and the movie I was watching was getting jumpy. I was using WMP, MSN, Internet explorer for basic browsing, with Vuze running in the background. The most I ever use. This is my specification:
Acer Aspire 5535
4GB RAM DDR2
AMD Turion X2 Dual Core RM70 (2.0GHZ/1MB)
320GB HDD
Shouldn't this laptop be able to handle these tasks without getting so hot?
View 6 Replies
View Related
Apr 6, 2009
I got an Acer 5535 laptop that comes with Vista, and none of the official acer websites have windows XP drivers. To make the switch myself I changed the SATA setting AHCI to IDE (otherwise XP won't work), installed XP and used the drivers from: [url]
Drivers and everything worked fine but when i went to install World of Warcraft it said my laptop doesnt meet the minimum requirements, I then right clicked My Computer -> properties, and noticed it says I have 1Ghz speed and 1.75 RAM when it should be 2GHZ and 2GB RAM.
So far i noticed no decrease in speed but would this ruin my laptop this way, and why has the numbers of my computer speed changed? I'll switch back to Vista if it means keeping my laptop running fine, but i prefer XP if possible.
View 7 Replies
View Related
May 26, 2008
when i turn on my Acer Aspire 3000 i put in my password then it makes me choose a windows xp as i have a dual boot but even if i choose either one it give me the message: "windows could not start because the following file is missing or corrupt <Windows root>system32hall.dll
View 5 Replies
View Related
Jan 31, 2009
My Acer laptop died on me sometime last year, I tried to fix it, had somebody who is more techie than me look at it and we couldn't fix it. He managed to get all the data off but couldn't get it to boot up.
My brother recently had a similar problem with his desktop computer so he told me to put an XP disc in and change the BIOS so it booted from the CD ROM.
I have done this and it wont boot. It doesn't seem to recognise there is a disc in there.
When it loads, the Windows XP screen comes on, then a blue screen flashes up, can't read what it says as it doesn't stay on long enough, then the Acer screen comes up then the screen asking if you want to start up in safe mode etc comes up, if I select start as normal or from last know good configuration, it just keeps looping but if I select safe mode, a huge list of drivers comes up then it turns itself off.
I have tried to do the built in recovery but it doesn't work, just stays on please wait for hours.
View 5 Replies
View Related
Feb 7, 2015
So I reinstalled my windows on my laptop, a few months ago and after that I noticed that my games load very slow.(All games).
One example is Dota 2, it takes about 4 mins to load to the main menu and then I have to start an offline bot match in order to load the map which also takes ~5 minutes. I didn't had this problem before reinstalling the windows and I really don't know what can be the problem...sure I installed all my drivers but not sure if they were good since you get tons of drivers for things your laptop doesn't even have
Specs:
Acer Asipre AS5755G
Inter Core i5 -2430M 2.4gHZ
Nvidia GeForceGT 540m 2gb
8 gb ram
750 HDD
View 3 Replies
View Related
Feb 9, 2015
i have a Acer Aspire V3-571. I what to run my windows in uefi.
View 1 Replies
View Related
Mar 8, 2009
a have a acer aspire 5630 and my dvd driver has a problem this is what it says Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
View 5 Replies
View Related
Sep 6, 2014
I don't have the option D2D listed in the BIOS >> Main - so I can't turn it on :-) and going to F10 while booting has no effect. When I examine the disk (out of the computer) I do see drives C: and RECOVERY(Y
View 2 Replies
View Related
Sep 7, 2014
I don't have the option D2D listed in the BIOS >> Main - so I can't turn it on and going to F10 while booting has no effect.
When I examine the disk (out of the computer) I do see drives C: and RECOVERY , so what to do next?
View 2 Replies
View Related
Dec 21, 2014
is there an easy way to make my Aspire 3820T operate faster, it takes for ever to load chrome or any program
View 1 Replies
View Related
Sep 30, 2014
I have a Probook 4730s with Windows 7. I continue to get the following error after the computer starts up -
hpConnectionManager.exe
Cannot load assembly:
System.Data.SQLite, Version=1.0.61.0, Culture=neutral,
PublicKeyTolken=db937bcd44ff139
The application will now exit.
It does not appear to have a negative impact but it is annoying get this at each start up.
View 2 Replies
View Related
Dec 4, 2014
Still jumping in BIOS. clicked "discard changes", then it aked "load previous configurations" and i clicked yes. still no change.
View 2 Replies
View Related
Feb 8, 2015
I just bought a new Aspire V15 Nitro Black Edition VN7-591G-74LK. I found the WIFI (Atheros AR5BWB222) disconnects every time the CPU/Fan is in full load or nearly full load. Once the CPU/Fan utilization is low, the WiFi connection recovers.
View 1 Replies
View Related
Oct 19, 2014
I have a "Hive" error message that displays on a blue screen. Windows does not load.
View 2 Replies
View Related
Nov 27, 2008
I used 2 X 2GB memory but on my BIOS it recon only 3.3 GB, but few days ago my laptop going nuts, my geforce 7300 go is falling.
after contacted my local acer service, and they examine my laptop, they found my mem card had no problem on it, and the upgrade my BIOS to clean up the mess but, my mem reduce from 3.3 to only 3 gb. it all at the bios mem check, not on OS. they said this laptop didn't support 4 GB memory, that's wierd, on this notebook spec it said up to 4 GB. not 3 GB.
so where the going wrong? since I already run this laptop with 4 GB ram and recon it as 3.3 gb and had no problem with it, for a long times, but after had problem with the geforce faling down it can't recon 3.3 gb after they fix it with upgrade the bios. I think the problem goes to the motherboard, if I goes to old bios the geforce is falling down, if I stay on this bios it's only recon 3 gb ram mem. they can't explain why this happen.
and the bottom line, you guys with acer laptop and using 4 GB ram memory should check at the bios, how much it recon, it as 4 GB or 3.3 GB.
since IMHO the OS never will be using 4 GB if the bios didn't recon it.
but there is some glicth if you look at the system information it recon 4 GB but, on bios it recon as 3 GB and the task manager recon it as 3 GB
View 5 Replies
View Related
Sep 5, 2014
During restore using Acer recovery disks for this Acer aspire 551, the recovery stalls at the final step where the wim file is written to the c: drive. It gives me an i/o error.
I suspect that the disk is functional because I have run the cmd.exe program from the x:drive and then run both scndsk.exe and scndsk.exe /F to fix any errors. No errors were detected.
However, any fix for this error that I have encountered suggests replacing the hardrive. This seems to be inappropriate, in this case.
I should also say that I have used dos commands to copy a file from the system32 directory to the c: drive successfully suggesting that there is no problem with writing to the disk.
Lastly, the cd rom hardware must be working or the disks would not be successfully read to the final stage. How this can be an i/o error eludes me.
View 2 Replies
View Related
Nov 15, 2007
I've been getting the BSOD error on my PC. The main ewrror is 0x000000f4 but I sometimes get the 77 error as well. Most times i need to reboot and then I get the 200 fixed hard disk 0 failed error . If I click F! i get yet another error, PXE.61 error and this takes my rebooting quite a few times in order to get windows xp (media center edition) to come uo it stays on for a while (the length of time is getting shorter and shoryer these days) and then I have to go through the entire scenario over again. I'm trying to remove the files and programs that I actually care about off this comp. I contacted Acer tech support and was told that it most likely a HArd drive problem and that it would need to be replaced They had the wrong warranty ending date for me and after providing proof of purchase, they changed it to 11/23/07. Now that I have about 8 days left on my warranty. the tech support person told me to purchase the extended warranty because if I ship it to them and the warranty expires, I will have to pay for the service. Now my question is this. I'm not too sure that it would be worth shipping it to them for repairs I will have to pay $99 for the warranty plus tax and At least $100 to ship it back to them. On top of that I have read horror stories about people who sent their comps in to be repaired and it being returned to them with scratches on the LCD, initial problems not repaird or additional problems after the comp was returned to them. I'd much rather carry it in to a shop but was told their are no local repair shops in my city except for geek squad and they will charge me since I didn't purchase my comp from them. WHat would you do take it to a local repair shop or pay the bugcks to extend the warranty and then pay to have it shipped to be repaired? Another reason why I am leery is because I bought a HP laptop last year. the Ac adapter jack ont he comp was loose so I shipped it to HP to have it repaired. they had my comp for almost a month and then told me the motherboard, keyboard, speakers, and LCD display was unsalvageable and that it would cost me over $1000 to have it replaced(i only paid $369 for it on black Friday). They also told me that I had a liquid spill which was a total lie as I keep my laptop in my bedroom and I never eat or drink in my bedroom.( come to find out that loose jacks are a known problem with some Hp laptops I have read horror storeies about Acer using the dreaded liquid spill excuse too and I don't want to go through the drama again. Are the BSOD errors definitely the fault of a faulty hard drive?
View 7 Replies
View Related
Sep 24, 2009
I have an Acer Aspire 6920 and I'm trying to to do the erecovery, everytime I try to create the disks I get a message saying
"Error Code: 1014
Burning Error, Please insert a blank CD/DVD into the optical drive and press OK to continue"
I have tried many different blank discs but I always get the same error. I have also red the thread on this forum where someone had a similar problem and I tried running my computer in safe mode but the programme will not run..
View 7 Replies
View Related
Mar 21, 2009
I have an Acer Aspire 5672Wlmi and recently my battery went completely dead. I went to the Acer website to find out that they are out of stock which meant that I am out of luck. A quick search on amazon gave me some promising results and a few days ago I bought a battery that is an equivalent of the one I need.
If I try to boot the computer using the battery I get an error saying that I have the wrong battery and I should insert the correct battery and press any key. This message is shown immediately after the Acer logo flashes momentarily during the POST so I guess this restriction comes from Acer's BIOS. Right now it seems my chances of having the right battery are as high as being able to find a key that says "any" o my keyboard.
However I know that the battery is fine because it runs fine if I insert it once the latop has booted. Even if I remove the power plug after that it runs just fine. Also the fact that I am able to read the message when the latop is running only on battery is sufficient to convince me that my battery is fine and my BIOS is wrong.
My questions is, what should I do to fix this problem? I have already contacted the seller but I thought you guys might know more about how to fix this. I guess it would involve flashing the bios which is fine with me.
If it matters for the BIOS version, the laptop was bought in the UK.
View 10 Replies
View Related
Feb 10, 2008
I have wiped off the acer windows xp and have clean installed windows vista home basic, i can not burn any cd/dvds i get the following error when using windows to burn a disc or media player:
There was a problem burning the discThere was an error burning the disc. The disc might no longer be usable.I have been to microsoft help and acersupport.com.au and they both have problems relating to the issue but no fixes for example over at [url] has the problem but i dont believe i ever had acer eLock so that can't be the problem and over at microsoft it says about having "$" in the file name and that is not the problem, is anyone able to shed some light on the situation,
View 4 Replies
View Related
Sep 8, 2014
I've successfully been using Win 8.1pro for the past week. I've just been working on my Acer Aspire 5542 laptop browsing Google and Facebook when it stopped working. On switching on, I keep getting a message { "PREPARING AUTOMATIC REPAIR" after about 10 seconds a blue screen flashes in 1 second that says "): your PC ran into problems and needs to restart. We are just collecting error info and we'll restart for you."} and computer proceeds to restart and keeps looping the same process indefinitely. It's been like this since yesterday..
View 6 Replies
View Related
