My wifi was working perfectly before the restore and then stopped working after the restore. I did the restore to get rid of my data and start fresh for next years school yeat.
View 3 RepliesMy Acer is detetecting my home wifi but cannot connect. I have the laptop just over a year and this problem has just cropped up.
It detects iPhone hot spot and connect to that.
There is no issue with the home wifi as other devices are coneecting without issue.
After using the inbuild recovery manager on my Aspire one 753 my laptop will not conect to Wireless internet. I think the problem has somthing to do with drivers but i am not sure.
View 9 Replies View RelatedI just bought this today and it will not connect to my WIFI. I have Netgear WNDR 4500 router. It does not see the home network.
View 2 Replies View RelatedI'm having probs connecting wireless my Acer Aspire 8730. I had this issue 5 days into buying this laptop. It seems to be an intermittant problem as sometimes it connects fine but other times it doesn't. Sometimes it finds other available networks but not my router. Comet sent the laptop back to Acer who insist there's not a problem with the network card. I did find a setting on my router for extended range that we have checked but the problem still persists. If I connect via the ethernet cable then no problems but if I sit the laptop next to the router it still doesn't connect wireless. It seems to have completely lost the plot over Christmas and can now find absolutely nothing wirelessly. I could try changing the router but I'm a bit loathed to do this as we have aother laptop that runs fine via my router. I'm not sure where to go from here as I know both Comet and Acer will deny there's a problem.
View 15 Replies View Relatedmy wireless cut out this afternoon having worked since i bought this laptop a year ago.
i've tried the 'repair' route. i've looked at the device manager and it is supposedly working, but i've had to plug into the wireless router with a physical wire to get connected to the internet. the message i am getting is that windows cannot connect to my preferred network (the one i've been using for a year).
I have an Acer notebook and I really want to have wifi always on. I accidentally keep turning off the wifi every once in a while,
View 4 Replies View RelatedI just got a Aspire 5520 from a friend. Before I restored it to factory i was able to connect to my secure wireless network. Now that i have restored it, I can connect but then the enet mangatment will connect but then disconnect. but the windows icon says its connected. but it will not get past my router or anything and if i try to acess my router from my aspire it will not load the page. my router is fine i have several other devieces connected to it that have no problem. I have checked my router settings to make sure the settings in the comp is right i have a wpa2-personal with a apk securtiy. the router itslef is a belkin n600. since this machine is not under warrenty i cann't ask acer support. Also i can connect to any unsecured with no problem
View 9 Replies View RelatedI bought a new ext. harddrive (Verbatim 3.5" 1TB QUAD INTERFACE) in order to connect it to my laptop (Acer Aspire 5930, Win Vista, SP1) via eSATA port. However this does not work at all. The computer simply does not detect the hard drive. The same trouble appeared when i tried to connect the drive to another machine, so it is possible its simply broken down. But the USB connection works pretty well.
View 8 Replies View RelatedI have a Western Digital 1TB USB 3.0 external drive. I am connecting it to the correct (blue) USB 3.0 port on my Acer Aspire 5755-6647 laptop which runs Windows 7 x64.
Upon connection, I get the "This device can perform faster: This USB Mass Storage Device can transfer information faster if you connect it to a Super-Speed USB 3.0 port" message. When copying files off the drive, I get about 32 MB/s, which corresponds to USB 2.0 speeds.
I have tried disabling USB power management in the USB 3.0 Host Controller Utility. I have tried uninstalling the device and reinstalling it. The cable I am using came with the drive and is a USB 3.0 cable. I have the newest Renesas USB 3.0 driver installed (2.0.34.0). I have also tried using an older Renesas driver. My BIOS is up to date (P5WE0121).
The first time I connected this drive to my laptop, it was on a USB 2.0 port (I had for some reason misremembered which side of the laptop had the 3.0 port and didn't check for blue). As I said, though, I've uninstalled the device completely. I suspect that Windows may be "remembering" the device and installing it with the 2.0 driver.
Is there a way to get a list of people connected to my MBP that I have enabled internet sharing?
View 10 Replies View RelatedOk. My laptop won't connect to the internet. It connectes to the wifi fine but will not connect to the internet. I tried hardwiring and that won't work either. All other devices connect fine. I uninstalled that and it worked fine. I am unable to find that now. The router is a Verizon Fios / Actiontec router M142RWR.
I am running windows 7.
My new Inspiron is having an issue with connecting to my home wifi. The router (UPC TC 7200 U) is set to 5 GHz on Channel 40 with n-standard and delivers a strong signal on all other devices that are connected.According to the product description the Inspiron 7000 should have no problems finding this network as it has a dual-band wifi card.The issue also doesn't lie with the router as other new devices that I brought to my home can find and connect to the network without any problems.I downloaded and installed the current intel and dell drivers for the wifi card; still I cannot find the 5GHz network on my new dell.
View 2 Replies View RelatedWhenever i turn on my laptop it connects to the wi-fi for a brief period of time and then disconnects and i have to reconnect to the network manually. after doing this, it takes an extremely long time to autoconnect and says "connecting to the network is taking longer than usual".
I have the "Intel(R) Centrino(R) Wireless-N 2230" Wi-Fi Card/Adapter and the Driver version is "15.10.3.2" i'm not sure if this is the newest version but i have tried to update and wasn't able to successfully do so.
Also this occurs on any wifi i connect to, even wi-fi that i connect to for the first time takes an extremely long time to connect (2-5 mins).
We have found that the latest driver for the Intel Ultimate-N 6300 AGN WiFi adapter for Windows 7 64 bit gives NETwNs64 Event 5060 errors when connecting to WiFi using Radius (Certificate) authentication.
We have tried Network_Driver_597FG_WN_15.01.1000_A02 which is the latest on the Dell web site..We have tried Wireless_15.3.1_Ds64 which is the latest on the Intel web site.We have had to revert to the NIC_DRVR_WIN_R292654 which is version 14.0.1.2 driver which is both stable and does not give errors in the event log. Given that we do not have issues with the version 14.0.1.2 driver, we intend to stay with that until advised otherwise.
I have a Dell Inspiron 1525 Laptop and for some reason the wifi isnt working nor plugging the cable into the laptop.
View 12 Replies View Relatedmy Acer Aspire one, Windows XP, 160gb, and want to restore it to factory settings because it won't start up and get to windows.
View 4 Replies View RelatedPreface:
I am stuck being tech support for my brother who is living in Torres Vedras, Portugal right now. He is having some problems with a pretty new Acer Aspire 5810TZ that was given to him around Christmas time. The computer had been used for about a month before he received it and had a few programs installed on it along with the usual bloatware. I cleaned up what I could before he left for Portugal again and installed AVG anti-virus, MS Office '07, and Windows 7.
Now that he is back in Portugal he is having problems with the things he uses most on the computer (Built in microphone not working, built in webcam only working randomly for a short amount of time, and DivX failing any time he tries to watch tv or movies online) I've walked him through updating all the drivers and reinstalling DivX, but nothing seems to fix these problems and Windows 7 is starting to look like more trouble than it is worth to him.
Main Question: Is there any way to restore the computer back to the way it was when first purchased (with Vista or 7, whichever will work) without the use of recovery discs (He does not have any with him over seas) in a way that is simple enough for me to relay to him?
i am trying to restore laptop with restore cd's that was supplied, the problem is that i can get the alt f10 system to work as it just constantly beeps till i let it go. i have read through threads that talk about a recovery partition but not technically minded so i dont know if this has one or how to find it.
View 4 Replies View RelatedI have acer aspire timeline x 5830TG. I Bought It which have Recovery Partition & One Main Partition ( C: )
I shrink this partition into two Partitions then i want to restore my laptop to factory defaults by using recovery discs .
Ido but when open my laptop again i found my hard drive still have two partions , not just ( C: ) like i bought first .
* I just finish restoring , this photo right now ....
it's first day of 2010 and my notebook's bios ..F@$k up after updating ..i'm so sad , i have it only one week, it's brand new.
And i'm asking have anyone heard any solution about that problem for 5810T?
I was trying to do a Factory Recovery in my Acer Aspire 5610z using eRecovery. Everything was fine until the "Acer Launch" window appeared.
Now it stuck at "Process 1/2","Install eRecovery solution", "Please wait"
There is another window behind it but I am unable to view it, this is going on for more than 2 hrs and I would very much appreciate your help to acomplish this recovery.
the axer lauch window couldn't be moved.
How do I restore my aspire 5536 to factory settings as if I just bought it from the store?
View 4 Replies View RelatedI recently reinstalled windows 8.1 on my laptop as I had cloning problems with my new ssd (crucial mx100), reinstalling windows apparently solved the problem. I had problems with my display (brightness could not be adjusted) that was solved by installing intel's latest drivers using their app as device manager showed that it had the latest drivers. i only have one issue right now, the touch pad lost its multi-touch features and windows 8.1 gestures, is there anyway to fix this? I know it is probably a driver's problem....
My laptop is acer V3-772G-747A8G75MAKK.
I have an ACER 5741 laptop that after ACER e-restore will not load Windows.
View 1 Replies View RelatedHow do I restore my aspire 5536 to factory settings as if I just bought it from the store?
View 4 Replies View RelatedI had to buy the recovery disk for my Aspire V5, when I start I change the bios to UEFI with secure enabled, then I use the disk Recovery System, once that I´m in the Acer Console Management, and I Selected the restore full, a pop up came with the message "Please Change your bios to Legacy¨ so I click on the exit button, and I enter to the bios and select the legacy mode, then the acer console management starts and says that the systems recovery fails because this is only for UEFI mode. So I dont know what to do, I have another 4 disk for the recovery but none of this is a booteable disk. Also I tried with UEFI and boot secure disable and same result .
View 1 Replies View RelatedMy high school-age son was working on an English paper when something fell off a shelf and whacked his Aspire 3680 right above the hard drive bay. It started clicking and finally crashed.
The computer won't run with the hard drive installed. It makes nasty clicking sounds trying to boot, and finally beeps and powers off. Without the hard drive, the laptop powers up and runs BIOS just fine.
We can buy a new hard drive, but it seems awful to pay Acer another $20 + $10 shipping for the Vista restore disk!
where i can download a free restore disk for my acer aspire 5315? it crashed recently and took all the contents of my hard drive with it in the process, and it never came with a backup disk.
View 4 Replies View RelatedI have a Aspire M5 - I am trying to restore factory settings - it is stalling at 29/55 installing office 2010. How do I get past this?
View 3 Replies View Related