My problem is my acer travelmate 4200 screen is now showing only 1024 x 768 (4:3) there are black boder on right side of the screen that doesn't show anything.
The back lighting in that area is normal. my laptop is 15 inch and the native resolution is 1280 x 768 but when i check the Hide mode that monitor doesn't support option it only display 800 x 600 and 1024 x 768 only.
I already update the BIOS and the graphic driver but the problem still remain. I search the internet and found that i problem may be due to epresentation.I update the epresentation and the problem persist.
I own a 3.5 years old Acer Aspire 5742G (Core i3 M380; NVIDIA540M). the heat sink or the collinig fan might have some issue as it usually gets overheated when playing games (even CS condition zero/1.6). I don't play games anymore, so its not a problem.
The problem is that I am unable to adjust the screen brightness from the keyboars shortcut (Fn+ Left/Right arrow key), neither from the control panel (Power Settings).
Although I do noticed something that, if I change my brightness settings (nothing happens) and I close the laptop lid (display screen) by folding it down and openeing it back after 3-4 seconds, the brightness is now changed.
Screen automatically dims as I go in little dark areas and gets too bright when it has so much light around it. I am trying Fn+ arrow keys but they make very less difference. Is there any way to control this?
I am using Windows 8.1 and display drivers are Intel HD Graphics Family version 10.18.10.3316.
I tried a search and couldn't find the answer. Does anybody know why the size of the mini screen changed from 10.2 to 10.1, the resolution dropped slightly because of that too. I bought one in November with the 10.2 and they are sending a replacement with the 10.1, any reason to just keep the 10.2 and repair it.
I have an ACER Aspire 5920Z laptop and the screen just starts Flickering in between .......Can something be done about it? well just gathered out a couple of info ..is it related to the 8ms response time the laptop has..?The refresh rate doesnt change on LCD screens so that option doesnt work either (fixed at 60)
I bought a dv3t-2000 two months ago and recently i installed windows 7 and i just realize that is not possible to change the brightness on the screen, is always the same. I have tried changing the power plans, I've upgraded the BIOS, but so far is not working.
how to change the screen resolution but, it won't stay at recommended resolution when I restart my laptop, it keeps going back too the smallest resolution. I have to go and change the resolution every time I turn it back on.
What is the point of sending a laptop to repairs if they do more damage than good? I could put up with the dodgy screen. I have months of work, musical compositions etc. stored on that laptop. This is a disgrace and I can't imagine what would possibly compensate for it. I'll have to see what I can get off my old laptop that I gave to someone else and look through my emails for stuff I sent people.
For some reason I can't change my screen brightness anymore. I've already tried a HD 4000 driver rollback to version 18.104.22.16823 and I also disabled "adaptive screen brightness" at the power management. For some reason I can change the brightness by using the "microsoft basic display adapter" driver instead of the HD 4000 but that isn't a real solution.
I don't know what happened, but my laptop's not working.
I was using my laptop as a desktop computer (no battery) when I accidentally switched the switch off. After switching it on, I tried to turn on my laptop and the first thing I noticed was the blank screen. Then the power turned off, and then turned on again. The fan is working, but nothing else is. I don't hear or notice any processing, so I'm pretty sure nothing's working right except for the fan and the lights indicating that it's on.
I tried to reset the laptop by disconnecting it from power and then turning it back on after 30 seconds - but no luck.
I just got this brand new Acer Aspire 5534 notebook (laptop) a few days ago. The wireless has been working just fine and all the systems are functioning as well. last night when i turned on my laptop and went onto the internet the screen on the webpages were flashing violently. The flashing is worse when i move my cursor, type, or if the page loads. Some sites like Facebook and google the flashing gets worse while im on them.
I have tried changing my battery settings, uploading "drivers" and updates, and disconnecting my wireless. I know that the problem doesn't lie in my wireless network itself since the problem occurs no matter what wireless network im using. my LAN communication network indicator is flashing orange. I have heard that this means that the wireless is connecting with my laptop incorectly or sending "traffic" or something. I am assuming that maybe the problem is with the way my computer is recieving wireless or something realating to that since i can be on any network and the orange LAN light flashes and the screen flashes too.
I can't change my monitor's resolution and the screen brightness after I upgrade the windows from windows 7 ultimate to windows 8.1 pro build 9600I've already installed graphic card , but i can't change my resolution more than 1024x768 My laptop is HP 431 with intel core i3-2310m CPU @ 2.10 GHz , AMD Graphics HD 7450M , DDR3 1 GB (i don't know why , but i've already installed AMD Graphics HD 7400M Series because my notebook isn't compatible with other AMD Graphics) , OS 64-bit
I have installed the latest driers and since then I am unable to change the screen brightness using function keys. I have installed multiple driver updates hence it is difficult to find out which driver is causing the issue.
I have an Aspire 2920 laptop with Windows Vista Home Edition O.S. It starts and works fine except that after I was using it with an external monitor (a flat screen tv) on the option to use external monitor, it only now starts thinking the monitor is the flat screen tv and does not recognizes the normal laptop screen. The laptop screen is now "pixeled" and only shows like 2/3 of its total width. I've checked in Control Panel and it has the flat screen registered as the "normal" monitor, but I can not way a find to tell the computer that the monitor is the same as usual and not the flat screen tv.
This afternoon I decided to do a clean install of windows 8.1 on my Acer Aspire v5-431P. Everything went well and it booted up as it should do. After completing the windows setup procedure, I went on to reinstall all the drivers. Everything was still fine. When I was downloading them from the Acer website I heard the sound a windows computer makes when a device is plugged in or out. The screen went off and on and the image was blurry and flickering. Like it's covered in water. I also see everything double. But very vague.
I tried to reboot the laptop, took out the battery, plugged it in and out of the power source etc. The problem occurs after the windows login screen. The acer bios logo and the windows startup logo are perfectly fine but after that it's cr*p. At this point I was certain the screen itself was perfectly fine so I tried testing is on my tv using and HDMI cable. Worked perfectly.
The last thing I tried was reinstalling windows but the same happened. After 5 minutes of usage the screen goes ham again.
I recently got an acer aspire e15 for xmas and I've started to have problems with it like when i turn it on and adjust the screen or simply pick it up to move it the screen will turn off like a standby but take ages coming back on and sometimes it will just simple restart the laptop....