Im trying to do a factory restore using the Acer eRecovery on Aspire 5100 laptop, which I set up using their wizard, input the password, ran from Vista, it has rebooted and is showing the Windows XP logo and the moving "progress" bar thing. However, after about 3 mins, the bar stops moving and nothing else happens, its been like that for ages now. Resetting the power starts it up and gets to the same point and stops again. I have used it before without problems, the hidden partition was there before I started (I checked). Now I cant do anything with the laptop at all! Can anyone suggest what I can do now? I didn't ever get round to making DVD backup disks. The machine is also 2 years old, and I dont want to spend a fortune on Acer's 50p per min customer service, considering they should've given me a boot disk with the machine in the first place. I only wanted to restore it as for no apparent reason all my USB devices stopped being recognized by vista.
I'm working on my friends laptop (model mentioned above). He does not have the eRecovery CD so I'm unable to restore the machine back to factory. I tried loading XP Pro (Volume License) before and after disabling D2D in the BIOS and wiping the HDD.
Once the installation begins, the machine begins to install the necessary files normally, I reach the "Starting Windows" prompt then the machine crashes to the following error(s):
Technical information: *** STOP: 0X0000007E (0XC0000005,0XF854A0BF,0XF8996208,0XF8995F08) pci.sys - Address F854A0BF base at F8543000, Datestamp 3b7d855c ***
No additional hardware is attached to the machine during install, It has the default hardware installed. The same Volume License install disk worked fine on an older Aspire 3000 model, Dell, Gateway and (2) custom builds.
My boyfriends computer has "crashed" after he tried some "optimizing" last night.
When at the login page, it freezes before it is possible to write the password so access to the computer is not possible.
Has checked F2 at boot and D2D is set to be enabled.
When I click Alt+F10 at boot up, it says "wait a minute" where after it loads the windows 8 layout, not the erecovery tool as shown in the video by acer.
How can I check in the bios whether the recovery partition is corrupt or what else to do?
I have an Acer Aspire 6920 and I'm trying to to do the erecovery, everytime I try to create the disks I get a message saying
"Error Code: 1014 Burning Error, Please insert a blank CD/DVD into the optical drive and press OK to continue"
I have tried many different blank discs but I always get the same error. I have also red the thread on this forum where someone had a similar problem and I tried running my computer in safe mode but the programme will not run..
I was trying to do a Factory Recovery in my Acer Aspire 5610z using eRecovery. Everything was fine until the "Acer Launch" window appeared.
Now it stuck at "Process 1/2","Install eRecovery solution", "Please wait"
There is another window behind it but I am unable to view it, this is going on for more than 2 hrs and I would very much appreciate your help to acomplish this recovery. the axer lauch window couldn't be moved.
I was given a laptop aspire v5-122p and the ALT+F12 for internal recovery is not working. The hard drive and partition seems corrupted and damaged. Windows 8 try to start but a message says there was something wrong and that it will try to fix fit but it restart and do the same in a loop. I scanned the hard drive with an application that let me run it from a usb bootable flash drive. The hard drive came with sector errors.
If i install a new hard drive, can i order an erecovery disc and install everything or do i have to do something special? i read somewhere that clean hard drives need to be prepared first with another set of tools provided by Acer. The tools provided in the link are in an ISO named "Format CD".
I have an aspire 5755-6699 that has been giving me problems. It keeps freezing up and going into windows recovery at startup. Windows recovery stopped at checking and fixing disc errors. So I bought a new hard drive and put it in and tried to restore it with the recovery disks. Everything went fine until the very end with the language disc. The top bar went to 100% complete and the bottom bar stopped at 99% and just stayed there. I tried to restart the computer but it says there is no valid disk drive. Tried running e recovery again and the same thing happened. What should I do?
Last night, my system started hanging on the welcome screen (for over 30 minutes), so I attempted a windows system restore to a few days ago. That wouldn't work (I can re try it and advise of the specific error messages)....
I then tried the Alt+F10 erecovery, but again receive an error message when it is almost complete - the message says "windows restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click ok to restart the computer, then restart the installation" ....
The complete factory reset is the only thing I haven't tried, as I'd rather not lose all the pictures and music I have stored on there- is there a way to resolve the issue at all, without completely wiping the hard drive? I have access to other pcs etc to download things and burn them to cd/DVD/memory sticks...
I am using the Acer eRecovery discs (Windows 7 64 bit) on my Aspire V3-571. On multiple attempts at a recovery the process hangs at Step 41 of 60 when trying to load the OOBE (Out Of Box Experience) file. A second set of discs provided by Acer produces the same results. I have an extra 1TB WD SATA HD that I have swapped into the laptop for troubleshooting purposes. No joy there. The recovery process appears to run normally until it stalls at Step 41. It has hung at that point for an hour with nothing happening.
My acer 5100 came with vista and I'm trying to do a fresh install of XP SP2 on it.
After I get past the partitioning part in the install process, it goes on to the "installing windows" stage and shuts off midway. This has been happening a few times and after some googling, reckoned it has to do with the SATA hard drive.
I tried to get on Bios and change the SATA to IDE but I didnt find any modifiable property for the hard drive on BIOS
I'm wondering some of you folks who installed XP on a vista laptop got it done.
My dvd/cd rom had been working fine and all of a sudden it disappeared...I tried the registy--nothing....I tried device manager--nothing...I tried BIOS---nothing!....I know that a bunch of people have had the same issue...I'm wondering if anyone has found a solution.
I wanted to upgrade my processor on my Aspire 5100 from the so so tl-50 to the RM-70. I am wondering if anyone else has tried this and if so, did you have any problems installing. from what I have researched, AMD is using the same bios for the the Turion processors and the RM-70 seems to be the one that uses the same wattage range, socket and power consumption.
I have an Acer Aspire 5100 AMD 62x dualcore tk-53 i think its at like 1.7ghz, it came with Vista, I put XP back on it, came with 1gb of ram I upgraded to 4gb hoping it would run fine. To get to the point. When I first got the computer it ran great, however now sometime with it has brought it to this annoying spike in my CPU. I've tried everything I could to keep it down, but it spikes over 100% randomly and at the worst times. I've ran Process Explorer and watched when it spiked, nothing unusual. I've watched my task manager, nothing unusual. I've defraged, ran virus scans, disabled my virus protection, uninstalled it, reinstalled it, reformated, restarted, any and everything I could. I bought a stand for the laptop and a fan so it doesnt overheat. I've check my power settings, my page file remains the same around 555 on average even during the spikes.
I went to rip a CD and it didn't work, so I did some investigating and found that the CD/DVD isn't even showing up. It has worked in the past and no changes have been made to the system.
ive been having hard drive trouble where it says hard drive failure iminent. but I don't think that's my problem. My internet lags so bad on my aspire 5100, like when im trying to watch a streaming video it loads 3 seconds then stops, loads 3 seconds then stops. But when I plug my wifes dell laptop or my desktop into the same connection theres no lag at all. Would this have anything to do with my hard drive?
The laptop has been working fine until yesterday...the screen froze and wouldn't let me use the mousepad/curser. I turned the machine off and rebooted, it won't reboot, reacts for about 2 seconds, screen stays black and nothing. Do you think my processor is shot or thoughts to possibly fix it?
I think that it is an overheating problem considering my laptop (ONLY recently) seems to be getting very hot, to the point it needs to shut down. But this is the strange thing:
I had Windows Vista installed on this laptop (Acer Aspire 5100) earlier, and my battery almost never heated up to the point it needed to shut down, or even heat up to an extreme level.... But now that I have downgraded to Windows XP SP2, it seems to shut down MUCH more often. But I did find one thing of concern. Around the same time my laptop started shutting down, I installed an application called 'Game Speed Changer' and that whenever I had used it, it slowed my computer down immensely, and then when I went to close it, the BSOD would appear. Every time.
I purchased an Acer Aspire 5100 using it mostly for busines and writing. Now, I'd like to watch some videos, have an webcam, and play games, however, the integrated video card handles none of this well. It's slow and will sputter on something as simple as a short 60 second video clip.
I maxed out the 4GB Ram, thinking that Vista was using too much but it did not help.
Then I discovered this:
Quote:
For gaming, the graphics speed is enhanced care of the ATI Radeon Xpress 1100graphics card, with 128 MB dedicated memory. The card can tap into an additional 384 MB from shared system memory, for a total of 512 MB.
I did some research and found that I could go into the BIOS and change the memory from 128 to 512. I tried it, found the setting, changed it, and thought I'd find success. However, Vista somehow read these actions as an error and a failure to start, and would not start........................
I have been having some trouble with speed on this computer and I'm quite sure its not a connection problem and its a temperature problem. Lately I have been hearing some strange noises coming out of it and I do feel a lot of heat on it's underside. Unfortunately it only has one vent on the side and the rest are at the bottom. I will admit it is not the the best well kept laptop ever, for once it's never seen a compressed air can seen I took it out it's box. I did find this tutorial online for reducing the heat but I decided to post it here first to see what you guys thought about it boefore I went on with it.
I gotta say I never opened up a laptop before but that doesn't mean I'm computer illiterate or am shy about doing it. I do realize its a tutorial for a fujitsu and not an Acer. Well the bottom line is, what can I do to reduse the temperature? Can I attempt this [url]? and if so, are there any differences I shoould be aware about?
A coworker lost her HD, a new one was added and she bought XP Pro now when I try to install it, when it gets to Setup is starting Windows it stops and stays there for ever. I have left it like that for two days and get nowhere.
I am having a problem deleting Vista on my companies laptop, when I put in my OEM XP SP3 disc I am getting an error message, there is already an updated version of windows installed with no options, do I need a partion disc to help me? what brand & model # of this disc do I need, are there any other ways to accomplish complete deletion of VISTA & install XP SP3?
I formatted my laptop and then realized that I had lost my backup disc. So i ended up installing a copy of XP Pro.
I've been able to obtain most of the drivers needed on the acer site. However, I am unable to get my USB2.0 working, and I also have issues getting the built-in webcam working as well.
my Aspire 5100 laptop has ben fully-charged but the ePower icon in the system tray says it's as low as 1% charged, and for the past several months has altogether stopped giving me the warning baloon regarding the impending need to charge or else it'll go into hibernation.
i've had this laptop for one year now.
just tonight, though, i've realized something else too-- the orange 'battery' light on the front of the laptop is blinking steadily instead of a solid green (fully charged) or solid orange (charging). then i scrutinize the ePower battery icon in the system tray and it says the laptop has 15 of battery power left, and in paretheses "plugged in, not charging". yet i can be on the laptop for hours upon hours in this state, and it never shuts down.
