This happened few weeks ago and I'm tired of looking at it.how I can fix these nasty scratches? I thought about some Scotch Brite pads....or buff with 600-1000 grit wet dry sandpaper? Replacement of the display shell?
View 11 RepliesIs it impossible to avoid scratches on the Macbook Pros? My friend bought a MB Pro and after two weeks there are scratches everywhere in the aluminium and it doesn't look nice. Is it a bad mistake by Apply using this soft material?
View 10 Replies View Relatedim really considering buying a Aluminum unibody macbook. With previous notebooks, i ended up sending them back because of the glossy screens, attracting way too much glare. could someone tell me if the new macbook screens attract excessive glare, and can someone tell me there experiences with the screen. Also does anyone know if the Aluminum body scratches easily? is it the same Aluminum used in the older ipod nanos and minis?
View 10 Replies View RelatedI just came back from the store where they had a display model of the White Macbook and it was full of swirl marks (tiny scratches) everywhere on the outside shell. My question is... Do they come with tiny scratches like that from the factory or are they pristine when you get them?
View 10 Replies View RelatedI've read other complaints about the scratches on the E6400. Has anyone found a successful method of buffing out the scratches on the exterior surface of the LCD panel?
View 10 Replies View RelatedI worked my off to get this laptop. So I want to protect it as much as I can for as long as I can. I realize that since this is aluminum, it may experience corrosive pitting if I'm not careful.
SO, what case is the best to prevent this and to keep scratches off? I dont care if it changes the look, just give me the best one!
Another question, how are u supposed to pull out the magsafe anyway? Everytime I try to take it out, it always feels like the edge is going to scratch near the ports
i cant really describe it, but the "tuba" on my 6920G makes some really nasty noises when i turn the volume up...
im not sure if this is normal or not, if the tubas just not able to handle the loud bass or something... could someone try it out and see if theirs makes weird noises as well?
I did not know about this Dell Outlet until I signed up here. The prices seem to be much lower than buying a new unit. I have my eye on a Dell M6400 unit..
So my question is, what are your experiences with a refurbished unit? By refurbished, are these units that have been rented out to businesses and returned? Will I be buying a 100% used unit? or does Dell replaces parts inside before selling them etc? Am I taking chances on these units or am I safe in terms of dependability?
i wanted to install some new ram so i was takeing the cover off the back. when upside down, the top left screw was stuck and i tried to screw it off and now the screw hole is messed. also, when closeing the screw near the battery (bottom right) wont fully go in and i cant put it in fully?
View 5 Replies View Related[url]
View 3 Replies View RelatedI just got my MBP 13, I'm wondering if there's a recommended cover/case I should get. Also, which keyboard cover?
View 9 Replies View RelatedHas anybody tried to put a Latitude d620 ATG lcd display cover on regular D620? This seems like a simple switch but I would like to hear your opinions.
View 3 Replies View RelatedI bought a 13 inch macbook pro about a month ago and while enjoying my laptop, I heard a very faint tick sound. after a few days the tick sound become more prominent and after reading few complaints about ticking/clicking sound I am pretty sure this has nothing to do with the motion sensor or fan noise problems.
after few weeks gone by and I found out that if you press the bottom side of the laptop it will make a tick sound (is this normal?) I am not sure if this is causing the ticking problem I've been hearing.
Is anyone else getting little scratches on there studios where the lid rests down on the laptop? I'm getting them both on the top of the hinge and now the top of that black bar where the media controls and speakers are. You can see its from where the lid and laptop meet and rub together.
View 10 Replies View RelatedI recently bought FW 190 and used it for a week - but with my usage the back of the Lid has got few very small and minor scratches - I wouldn't have cared about it -- but now I do - because I am going to return this laptop to Sony Style warehouse and actually get a FW 390 --- which is a super sweet deal and also comes with Blue Ray Read/Write.
I just wanted to know, if anyone know how can I buff up or do something to get rid of the scratches on the back of the lid.
I have been extra careful caring for this laptop but it seems no matter how hard I try, the screen always develops a few "chinks" (small scratches that look like dots that cast a reflection on the actual screen). I've tried vaseline, Novus scratch repair, and, of course, sending in the laptop for a screen replacement. It boggles the mind that such an expensive laptop can be scratched so easily.
Am I alone in experiencing this? Are people just putting up with it? Have people found a reliable screen protector to use? I'm getting exasperated. I love everything else about the computer, but the cheap plastic that covers the screen just scratches so easily (I made sure never to close the laptop's lid, and still the screen managed to get scratched!)
I have had my studio 1735 since they launched last summer and its in perfect condition except for little black scratches above the speaker bar.
there is 2 similarly sized and spaced small scratches that are grey (they stand out).
I was wondering if anyone experienced this problem and no of a way to paint over them or order a new metal casing
I bought this TZ as a refurb from Sony. I didn't notice at first, but there are a couple superficial scratches on the lid that are apparent in direct light. What would be the best way to get rid of it? I have some auto paint buffing products that I've used on carbon fiber pieces, but those had been clearcoated IIRC. What can I do about light scratches on the TZ's lid?
View 10 Replies View RelatedI'm a proud new owner of a MBP 13-inch. couple of matters.
(1) A good skin/sleeve/cover/case to protect it on the go. Ideally I'd like a very lightweight and elegant skin or shell that's on all the time to protect the exterior from wear and tear, without trapping too much heat.
(2) I need a sleek padded case to carry the unit and typical accessories (charger, adapters, mouse) and other small items.
(3) I'm looking for a convenient laptop stand for my desk to set the MBP alongside an external monitor.
In trying to access the ram chips for upgrade I am trying to get the cover off. It is an unusually large sheet of plastic with four screws. Yes, I have loosened the screws but in trying to pull off the cover it is bending to the point of almost breaking and I don't want to force it. It is the 15.4 size gemstone.
View 4 Replies View Relatedanyone know of a keyboard cover they make for the studio xps 13? I find that I tend to wear down my keys (I already put a strip of tape over my space bar cuz that's where most of the wear is).
View 10 Replies View RelatedI'm trying to find a keyboard cover for my SR.
I found a few websites when I googled "sony sr keyboard cover".
Any reliable recommendations you guys can give me?
Any is there anything I need to worry about/look out for when purchasing one?
Or is it simply, "a cover is a cover"?
I just got my hands a Studio 15 with great specs at the cheap, but with a pretty badly scratched up LCD lid. Has anyone attempted replacing the lid? Is it hard? I've opened up and replaced a processor, keyboard, fingerprint reader, ram, and hard drive before, but never an LCD cover. I'm kinda worried about the power button and wifi catcher, and I'm worrying I may not put the screen back the right way. This is supposed to be for my cousin, but I can't give it this badly scratched up.
View 9 Replies View RelatedI mentioned previously that I didn't care for the smudges on the glossy black cover of the mini. So I ordered a spare LCD cover to save in case I want to revert back to stock, and took my mini apart tonight to paint the cover.
See the attachments.... one is a good example of the smudges.
right now I have the mini COMPLETELY apart!
I was going to paint the cover a red wrinkle finish, but have decided at the last minute to use a red rubberized coating instead. I guess this is similar to what the larger inspirons feel like.
Anyway, second coat is about to go on, I'll post pictures of it when it's done.
iv been looking around the and everyone says dell will only cover damage and not theft
this is quite worrying as i ordered a m6400 maxed out and its just to much to lose out on
anyone at all been able to light up the cover lights (just one of the colors even) for those who have done the 9400/E1705 to M1710 mods? I would really like to know how this can be done if there are some theories out there. Please refrain from saying how much you hate the lights or asking why I would care to do this :
Some methods I thought about trying:
USB port: 5V ok, will that work with the cover LEDs?
Fan port: I have heard this one might not work but can anyone confirm?
(I am talking about cutting off the connector that would originally go into the M1710 mobo and trying various things with the wires that happen to be color coded, 2 for each color of LED apparently.)
I have CR590 with Windows 7 installed. Recently have updated SFEP, Sony Shared Library, VAIO Event Service and VAIO Power Management to the latest versions from ftp://ftp.vaio-link.com.
Results:
1) "Capture" button started to work, it hadn't worked before, therefore all functional buttons work except AV Mode (I haven't installed Instant mode software)
2) VAIO profiles disappeared from PM settings — but this not a problem, I think I can leave with self configured profiles .....
I'm looking for a keyboard cover and I have an HP 6510B.
Do You know which is the right model for this notebook ?
Looking at focalpri** I've not found any model for my notebook.
what the screen/lcd cover that fits flush over the LCD is made of? Is it plastic or is it really glass like they advertise it is? I ask because people on youtube who are posting reviews say it's plastic and not glass. I'd like to know one way or the other before deciding to order.
View 3 Replies View Relatedive got a hp nw8440 that needs a switch cover,but talking to hp and spare parts warehouse they no longer make this item,.need cover and led board and led board cable
View 5 Replies View Related