Is there a way for me to drive 2x displays and the screen on the notebook at the same time?
There is HDMI, VGA and DisplayPort on this notebook. Can I use HDMI AND DisplayPort AND the display on the notebook same time?
I have a Dell XPS 1647 with Radeon 4670.
I have a 2 year old Inspirion 1545. The battery and adapter simultaneously died on me, so I bought new ones and can't for the life of me get the adapter to behave. One day,it will work,then the next day,nothing. I keep getting an error code saying that I need a65w adapter ,which the new one is. I have updated the BIOS and have done all of the other troubleshooting that I can find.
View 7 Replies View RelatedWhenever i'm using the key board, I can't use my mousepad at the same time. For example: if i'm holding the space bar, my mouse jams and no matter what i'm doing to the mouse pad, I can't move the mouse for as long as I hold a button. This presents major problems for gaming etcetera. I am using A dell N5050.
View 7 Replies View RelatedWhile I was hoping to use this for games, I have not been able to as the keyboard and touchpad cannot be used at the same time.
View 10 Replies View RelatedI own a T440s that comes with a SSD hard drive of 258 GB, and I was wondering wether it is possible to add additional space, like a 1TB HD drive?
View 8 Replies View RelatedWhen the keyboard on my T430s is in use, the touchpad is disabled. This prevents any gaming.
The driver for the touchpad is UltraNav Pointing Device version 16.2.19.14 (the newest available I believe). How to get the touchpad working so I can play some games?
I have tried to modify the touchpad settings from the Control Panel but I cannot find a relevent option.
Up until this week I was doing this with my Dell D620 using the PD01X D/Dock which has a PCI slot for a video card.
Well, it's PC refresh time at work and I received a Dell E6400. Turns out the docks for the E6400 and the D-series are different (not compatible) and there is no D/Dock for the E6400, so now I'm looking for a solution that will allow me to do 3 displays with the E6400.
I purchased StarTech's USB2DVIE external USB to DVI video card, but it's only got 16MB of RAM and whenever I scroll or move windows around in the display that is being driven by the USB2DVIE, it's a little choppy, even at 16-bit color.
There are other external USB video cards on the market, but this was one of the most expensive, and I can find no indication on any of the other cards of how much RAM they have. I'm thinking I need at least 64MB, which is what the PCI card had that I was using in the D/Dock with the D620.
For some reason, I am having a hard time getting dual displays to work with the m1730.
View 12 Replies View RelatedI've been looking at several different configurations of the Dell Studio XPS trying to find the right one to pull the trigger on.
Comparing the config of Corei5 vs the Corei7 i noticed a slight difference in the displays.
Corei5:
Edge-to-Edge FHD Widescreen 15.6 inch WLED LCD (1920x1080) W/2.0 MP BLKG15F [320-8330][421-0188][421-1010]
Corei7:
Full HD Widescreen 15.6 inch WLED LCD (1920x1080) W/2.0 MP BKG1510 [320-8330][421-0188][421-1010] .....
I love the current 1920x1200 LED display on my 1737, but it has developed some dead pixels (not sure how that happens).
I do have complete coverage, and I can get the screen replaced.
I've heard that there are some manufacturers or models of screens that are preferred. Which are they?
I finally pulled the trigger and bought a SXPS 16 from the outlet. I was wondering if there was any way I could run dual displays off of it?
Would an HDMI splitter work, or are there hardware/software issues stopping that from working.
I indent to get a dell studio 1537, but the shop where I want to buy it doesn't specify which kind of display it has.
Also their tech support is to dumb to get the info from anywhere else except their own page. (they provided a link to the 1555 model to get the resolution from there... duh).
http://www.emag.ro/notebook_laptop/n...32WNHD345T3BRD
My questions are, what resolutions are in the 1537 ? I want one with 1440x900 so, is there the posibility to get a 1280x800 one ? or all the 1537 and ATI 3450 come with at least 1440x900 .....
I have a Dell Inspiron 1520 with an Nvidia 8600gt. I have a dell 2409 24 inch 1920 x 1080 monitor and a Samsung 22inch 1680x1050 LCD TV. I use one or the other depending what room I'm in. Both are connected using VGA cables.
These have always worked perfectly, today when I tried plugging into either one they are detected as 'generic non pnp monitor' and I get a choice of standard resolutions up to 1600 x 1200. These always used to run at their native resolutions and were detected as Samsung and Dell.
I have reinstalled the display drivers, power cycled everything, gpu seems to be running fine according to gpu-z.
I have reverted to a working backup but that made no difference. Im using windows 7 64bit.
On the Dell Outlet all E6400 models are listed as LED including the WXGA (1280X800) Can anyone confirm they have a WXGA (1280X800) that is actually LED not CCFL? CCFL is not even listed as an option when configuring a new E6400.
View 10 Replies View RelatedWell got my third E6400 and third unit that had a CCFL from the outlet when ordered a system with LED. Got a hold tech support
they overnighted a new screen T661h which is a CMO. Bezel a RK149 and a Y793H assy back cover which has a inverter
I have Dell Inspiron 15 series 7000 laptop and I wanted to perform "Dell Backup & Recovery" task. I have tried connecting My Passport 1 TB external HDD to get back backup. I get "USB Key not detected" message on all the USB ports that I have tried. I have changed the cord also but of no avail. But when connect my 4GB USB pen drive, I do get success. Why do my "My Passport" connections are not recognized?
View 1 Replies View RelatedI plugged my HDMI cable into the computer today with the intention of duplicating the display on to my TV. When I do this the TV screen shows like I selected extend. I can extend the monitor and use the projector only setting, but duplicating does not work. I changed the Intel Graphics Options and the NVIDIA Control panel neither have worked. I have updated the bios, the NVIDIA and the Integrated drivers. I have even changed the resolution on both my computer and the TV with no fix.
What's the weirdest thing about this problem is that I have used this exact HDMI cable to this exact TV before and I didn't need to change a single setting and it worked great. I also took an ASUS laptop and plugged it in and used the FN + screen key, just like I would usually do with my Dell and the ASUS worked great.
I read a post on here that said when they update their BIOS it fixed this problem, although the post had other people that were not that lucky.
[URL]
I am about to make a purchase on the Studio XPS 16..
However, my main issue is would it be able to drive my 2 Dell 3007WFP-HC displays?..
I am aware that the Studio XPS 16 has a HDMI and DisplayPort built it.. Provided I am able to get all the conversion cables, could this laptop drive my 2 30" monitors at their native (2560 x 1600) resolution?..
I am trying to send my video signal from my laptop to my analog tv. I have a Inspiron 1520 laptop with a NVIDIA GeForce 8600M GT video card.
I hard wired the laptop and TV with yellow composite cable with an s-video adaptor (composite on tv and s-video on laptop).
When I try to setup for multiple displays I choose CLONE, but there is only a multiple selection option in the pulldown for LAPTOP DISPLAY AND HDTV.Can I not display image on my analog tv?
I have a XPS M1530 that has seen very little use but unfortunately won't boot now. It is stuck on the bios screen that displays the dell logo - the progress bar on this page only displays about 15% complete and will not progress any further under any circumstances. I have performed the diagnostic boot option of holding down the <FN> key before power on and this displays just the caps lock flashing rapidly - the flashing does not halt. The other diagnostic lights (scroll and num lock) remain unlit except at the initial boot they flash once as per normal.
As dell has not published the diagnostic codes. The laptop is "as new" if a few years old now and I would like to keep it for sometime to come - the purchase price at the time was ~£1300. One reason I bought dell was for the after sales care - I understand there have been various issues with this particular series of laptop which is unfortunate but I am hopeful to get it working again at reasonable cost.
Does the Latitude E7240 can support two external displays without a dock? Can have one plugged in to the mini displayport and one in to HDMI and output just to these displays?
Or is it limited to just the laptop display and one single external display?
I recently installed windows 8.1 on my dell xps 15z everything works alright but the screen at times displays vertical lights. It gives the image of the screen malfunctioning and then it disappears.
View 3 Replies View RelatedMy HP650 notebook has gone black screen. It is turning on properly but displays nothing .....
View 1 Replies View RelatedI just cleaned my laptop with wet wipes and when I turned it on, it wont start anymore it just displays from black to colored vertical lines going white. Is it just wet or will it come back to normal when i just wait?
View 1 Replies View RelatedBeen looking for some pictures comparing the different display panels HP offers with the Envy 15, but I haven't found much.
So I'll just ask those who own it; is there a quality difference in the 720P and 1080P display panels?
For gaming, lower native resolution would be optimal (performance/quality), but if the low-res panels are crap I'd get a full HD display, turn the resolution down and suffer some downscaling side-effects rather than playing with a crap native resolution..
It happens that my laptop sometimes start showing 4 displays and sometimes when rebooted several times. Starts working normally. Seems to me more of a drivers problem or else why would it start normally if this was a hardware problem. Also, when laptop was running, I kept shaking the laptop just to check if it was a hardware problem like the lcd's cable might be loose which fitted in the motherboard but it was not the case.
Laptop is: HP Envy 6.+Laptop is not under warranty.
I have attached the photos.
Photo 1: [URL] .....
I'm having an issue extending my display via an external monitor (Samsung 23inch). I’m using a 5750G with GT 540M and Intel HD 3000 that uses Nvidia Optimus technology. It's the i7 2360QM version. So it's a second gen HD 3000 I believe.
I can't seem to run 2 displays at once.. like if I connect an external monitor via the VGA or the HDMI.. I can use that monitor on it's own (while the laptop screen is disabled) just fine.. but the moment I try to duplicate displays or extend my desktop across two monitors.. the intel driver crashes...
The Intel driver keeps crashing and recovering every 2 seconds until the whole PC blue screens. (VIDEO_TDR_FAILURE - igdkmd64.sys) This is when windows is trying to run both monitors at once. If I quickly press Win+P and set it to a single display, it’s fine.
I can output to the external monitor (show desktop only on 2), via both VGA and HDMI and the laptop screen is off. This works fine, even at 1080p.
I can also output to the laptop screen only (show desktop only on 1), and the external monitor is off.
If I choose "duplicate", only the laptop screen works... But it drops down to a low res (1024x768)... However, in the Multiple Displays setting dropdown... “Duplicate” is no longer selected... and it’s now set to “Show desktop only on 1”. If I try change to duplicate again… both monitors go blank.
If I try to extend these displays, the laptop screen stays on... the external monitor goes blank, and the laptop screen immediately starts to flick off and on... as the driver crashes and restarts. I see the little dialog box in the notification area saying “The display driver has stopped responding and has recovered.” While specifying the Intel driver.
So here’s what I’ve tried so far:
Windows 8.1 fully updated, with the latest Intel Drivers and NVidia Drivers.
Windows 7 x64 SP1 with latest Intel and NVidia drivers... as well as the old drivers that are listed on the Acer site. Each time I completely uninstalled and deleted the old drivers before installing new ones.
I’ve tried these Intel drivers:
8.15.10.2342 (Acer site)
8.15.10.2622 - 15.22.54.64.2622
9.17.10.3347 - 15.28.20.64.3347
9.17.10.3517 - 15.28.22.64.3517 (latest)
I updated the BIOS (1.21). I also went into the BIOS and changed the GPU setting from ‘Switchable” to “Integrated” which basically disabled the GT 540m, so windows doesn't even load the nvidia control panel etc.. Even with just the Intel graphics enabled... same issue.
I’ve tried adjusting power management settings to ensure that power is always at max.
I know it’s not an issue with the external monitor or cables, as they all work fine when the laptop screen is not running... Also, I tested with a Samsung LCD TV with the same issue. The monitor and cables work fine with my PC and other Laptop.
So for some reason, the Intel driver does not want to let 2 screens display at once. And the way the Optimus technology works, I don’t think I can bypass the Intel GPU and use the NVidia one alone.
I tested Win 8.1 with all latest drivers.. and win 7 with a few combinations.. like both the older intel driver + old nvida driver (the ones listed on the Acer site for this laptop).. then I tried new nvidia + a few old intel drivers one at a time.. but the issue remains..
I have this Aspire 6920G with a beautiful 1080p screen.
My only concern is that when I switch between different displays, the size of the desktop objects and icons changes (see caputres below). And that occurs even when I connect my laptop to a 1080p LCD screen, with which the resolution does not change (I checked in the nVidia control panel).
After I disconnect/switch back to the original screen, the icons size is still not right and I need to reboot my computer to get them to their original aspect.
Any solution for this not to change everytime I connect an external monitor?
I don't know if it comes from Acer or Windows 7...
The temp option on Istat only displays the battery and HD is there any other sensors like the CPU and the GPU?
View 5 Replies View RelatedI am looking to update my laptop used for photography. The ideal replacement looks to be the ThinkPad W530 with a dock and display screen. As the W530’s will be used away from home it and monitor will need to be calibrated.
I have been told I can only do this if the graphics card, NVIDIA Quadro K2000M, supports has more than one LUT to both laptop and stand alone monitors be calibrated.