HP 650 Display :: Turning On But Displays Nothing
Jun 4, 2014My HP650 notebook has gone black screen. It is turning on properly but displays nothing .....
View 1 RepliesMy HP650 notebook has gone black screen. It is turning on properly but displays nothing .....
View 1 RepliesIt happens that my laptop sometimes start showing 4 displays and sometimes when rebooted several times. Starts working normally. Seems to me more of a drivers problem or else why would it start normally if this was a hardware problem. Also, when laptop was running, I kept shaking the laptop just to check if it was a hardware problem like the lcd's cable might be loose which fitted in the motherboard but it was not the case.
Laptop is: HP Envy 6.+Laptop is not under warranty.
I have attached the photos.
Photo 1: [URL] .....
My laptop is a DV6 6121tx with product number QB367PA#ACJ.
While installing bluestacks, it displayed an error stating not able to recognise the graphics card in the system.
Any safe update for the same if available.
HP support assistant details of my graphics driver::
Radeon (TM) HD 6770M
8.882.2.3000 (30-09-2011)
My PC info: HP Pavilion 17 Notebook PC, F9M02UA#ABA, 5CD4030SBT
I went to the Control Panel > Systems and Security > Power Options - Choose when to turn off display, for Battery and Plugged in I set to 20 minutes. As long as I'm active with the keyboard or mouse I'm fine but if I'm just reading or studying something on the screen, without any activity, the display will shut down in a minutes time, which is very irritating. Is there something else I need to do to keep my display on for a longer period of time?
I'm encountering having just purchased my laptop. None are dealbreakers and I'm not that put off by them but the fact that I'm not able to figure out a solution bothers me. Primarily, no matter what power setting I'm on or settings I change the display will turn off after 1 minute. Ther other power settings still come into play when they should (computer sleeps etc.) but I'm not able to delay the screen turning off.
View 5 Replies View RelatedI have an HP dv7-6c95dx laptop and the display is out of whack. Black is shown as blue and there are even red dots where some other color should be. LCD screen is a replacement screen and I have already switched out the lcd cable that connects to the lcd screen. When picture is displayed on an alternate screen, the picture is 100% fine. I was thinking the lcd inverter may be busted but I couldn't find a replacement inverter anywhere online for this model.
View 1 Replies View RelatedI was initially trying to get my DVD to play blu rays. I downloaded a different player and uninstalled the HP mediasmart dvd. This didn't work so I deleted the new player and went into restore system to an earlier time and did so. After I restarted my computer it began randomly turning off and by that I mean the screen. It goes black. I click enter or left clidk the mouse (this seems to prompt it) then after 5 seconds or so the lights on the right side start blinking and the display returns. This has happened before and I forget the solution. Also, my battery died about a month ago so I removed it.
View 3 Replies View Relatedsome blue screen error came and the display is gone. Laptop is turning on but no display, Checked with external monitor, display is showing. after a day, again turned on the laptop the display came and then after sometime again the blue screen error and now the same problem. Ran the LCD BIST Test it passed, done diagnostic check there wad some HDD error no. 0146. the blue screen error is showing video_tdr_error.
View 2 Replies View RelatedI have an HP PAVILION G6-1241EA and I just got a new motherboard and I installed it into my laptop. My laptop turns on but the screen is white. I looked at the wire and it is fine and I tried plugging in some other monitors vga and hdmi but nothing happens. Its been a long time since I've been on the laptop.
View 1 Replies View RelatedI have a HP Pavilion G7-1365dx Notebook and I recently have been having issues with the screen turning white while running Netflix or Sims 3. When the screen goes white I put it in sleep mode and then wake the comupter up again and the screen comes on like normal but if I'm running Netflix or Sims 3 its only a matter of time before it happens again.
Processor: AMD A6-3420M APU with Radeon(tm) HD Graphics 1.50GHz
Installed Memory (RAM): 4.00 GB (3.48 GB usable)
System Type: 64-bit Operating System
No Pen or Touch Input is available for this Display
My Dell XPS 15z model laptop display screen is suddenly turning to noising with vertical and horizontal scattered color lines. This is happening every 15 to 30 min and when the mouse cursor is activating after automatically resuming the screen normally.
cs_setInnerHtml('video_a6abdc71-398b-44c0-a184-952b80b1f1be','');
Is there a way for me to drive 2x displays and the screen on the notebook at the same time?
There is HDMI, VGA and DisplayPort on this notebook. Can I use HDMI AND DisplayPort AND the display on the notebook same time?
I have a Dell XPS 1647 with Radeon 4670.
Up until this week I was doing this with my Dell D620 using the PD01X D/Dock which has a PCI slot for a video card.
Well, it's PC refresh time at work and I received a Dell E6400. Turns out the docks for the E6400 and the D-series are different (not compatible) and there is no D/Dock for the E6400, so now I'm looking for a solution that will allow me to do 3 displays with the E6400.
I purchased StarTech's USB2DVIE external USB to DVI video card, but it's only got 16MB of RAM and whenever I scroll or move windows around in the display that is being driven by the USB2DVIE, it's a little choppy, even at 16-bit color.
There are other external USB video cards on the market, but this was one of the most expensive, and I can find no indication on any of the other cards of how much RAM they have. I'm thinking I need at least 64MB, which is what the PCI card had that I was using in the D/Dock with the D620.
For some reason, I am having a hard time getting dual displays to work with the m1730.
View 12 Replies View RelatedI've been looking at several different configurations of the Dell Studio XPS trying to find the right one to pull the trigger on.
Comparing the config of Corei5 vs the Corei7 i noticed a slight difference in the displays.
Corei5:
Edge-to-Edge FHD Widescreen 15.6 inch WLED LCD (1920x1080) W/2.0 MP BLKG15F [320-8330][421-0188][421-1010]
Corei7:
Full HD Widescreen 15.6 inch WLED LCD (1920x1080) W/2.0 MP BKG1510 [320-8330][421-0188][421-1010] .....
I love the current 1920x1200 LED display on my 1737, but it has developed some dead pixels (not sure how that happens).
I do have complete coverage, and I can get the screen replaced.
I've heard that there are some manufacturers or models of screens that are preferred. Which are they?
I finally pulled the trigger and bought a SXPS 16 from the outlet. I was wondering if there was any way I could run dual displays off of it?
Would an HDMI splitter work, or are there hardware/software issues stopping that from working.
I indent to get a dell studio 1537, but the shop where I want to buy it doesn't specify which kind of display it has.
Also their tech support is to dumb to get the info from anywhere else except their own page. (they provided a link to the 1555 model to get the resolution from there... duh).
http://www.emag.ro/notebook_laptop/n...32WNHD345T3BRD
My questions are, what resolutions are in the 1537 ? I want one with 1440x900 so, is there the posibility to get a 1280x800 one ? or all the 1537 and ATI 3450 come with at least 1440x900 .....
I have a Dell Inspiron 1520 with an Nvidia 8600gt. I have a dell 2409 24 inch 1920 x 1080 monitor and a Samsung 22inch 1680x1050 LCD TV. I use one or the other depending what room I'm in. Both are connected using VGA cables.
These have always worked perfectly, today when I tried plugging into either one they are detected as 'generic non pnp monitor' and I get a choice of standard resolutions up to 1600 x 1200. These always used to run at their native resolutions and were detected as Samsung and Dell.
I have reinstalled the display drivers, power cycled everything, gpu seems to be running fine according to gpu-z.
I have reverted to a working backup but that made no difference. Im using windows 7 64bit.
On the Dell Outlet all E6400 models are listed as LED including the WXGA (1280X800) Can anyone confirm they have a WXGA (1280X800) that is actually LED not CCFL? CCFL is not even listed as an option when configuring a new E6400.
View 10 Replies View RelatedWell got my third E6400 and third unit that had a CCFL from the outlet when ordered a system with LED. Got a hold tech support
they overnighted a new screen T661h which is a CMO. Bezel a RK149 and a Y793H assy back cover which has a inverter
Been looking for some pictures comparing the different display panels HP offers with the Envy 15, but I haven't found much.
So I'll just ask those who own it; is there a quality difference in the 720P and 1080P display panels?
For gaming, lower native resolution would be optimal (performance/quality), but if the low-res panels are crap I'd get a full HD display, turn the resolution down and suffer some downscaling side-effects rather than playing with a crap native resolution..
I have Dell Inspiron 15 series 7000 laptop and I wanted to perform "Dell Backup & Recovery" task. I have tried connecting My Passport 1 TB external HDD to get back backup. I get "USB Key not detected" message on all the USB ports that I have tried. I have changed the cord also but of no avail. But when connect my 4GB USB pen drive, I do get success. Why do my "My Passport" connections are not recognized?
View 1 Replies View RelatedI plugged my HDMI cable into the computer today with the intention of duplicating the display on to my TV. When I do this the TV screen shows like I selected extend. I can extend the monitor and use the projector only setting, but duplicating does not work. I changed the Intel Graphics Options and the NVIDIA Control panel neither have worked. I have updated the bios, the NVIDIA and the Integrated drivers. I have even changed the resolution on both my computer and the TV with no fix.
What's the weirdest thing about this problem is that I have used this exact HDMI cable to this exact TV before and I didn't need to change a single setting and it worked great. I also took an ASUS laptop and plugged it in and used the FN + screen key, just like I would usually do with my Dell and the ASUS worked great.
I read a post on here that said when they update their BIOS it fixed this problem, although the post had other people that were not that lucky.
[URL]
I'm having an issue extending my display via an external monitor (Samsung 23inch). I’m using a 5750G with GT 540M and Intel HD 3000 that uses Nvidia Optimus technology. It's the i7 2360QM version. So it's a second gen HD 3000 I believe.
I can't seem to run 2 displays at once.. like if I connect an external monitor via the VGA or the HDMI.. I can use that monitor on it's own (while the laptop screen is disabled) just fine.. but the moment I try to duplicate displays or extend my desktop across two monitors.. the intel driver crashes...
The Intel driver keeps crashing and recovering every 2 seconds until the whole PC blue screens. (VIDEO_TDR_FAILURE - igdkmd64.sys) This is when windows is trying to run both monitors at once. If I quickly press Win+P and set it to a single display, it’s fine.
I can output to the external monitor (show desktop only on 2), via both VGA and HDMI and the laptop screen is off. This works fine, even at 1080p.
I can also output to the laptop screen only (show desktop only on 1), and the external monitor is off.
If I choose "duplicate", only the laptop screen works... But it drops down to a low res (1024x768)... However, in the Multiple Displays setting dropdown... “Duplicate” is no longer selected... and it’s now set to “Show desktop only on 1”. If I try change to duplicate again… both monitors go blank.
If I try to extend these displays, the laptop screen stays on... the external monitor goes blank, and the laptop screen immediately starts to flick off and on... as the driver crashes and restarts. I see the little dialog box in the notification area saying “The display driver has stopped responding and has recovered.” While specifying the Intel driver.
So here’s what I’ve tried so far:
Windows 8.1 fully updated, with the latest Intel Drivers and NVidia Drivers.
Windows 7 x64 SP1 with latest Intel and NVidia drivers... as well as the old drivers that are listed on the Acer site. Each time I completely uninstalled and deleted the old drivers before installing new ones.
I’ve tried these Intel drivers:
8.15.10.2342 (Acer site)
8.15.10.2622 - 15.22.54.64.2622
9.17.10.3347 - 15.28.20.64.3347
9.17.10.3517 - 15.28.22.64.3517 (latest)
I updated the BIOS (1.21). I also went into the BIOS and changed the GPU setting from ‘Switchable” to “Integrated” which basically disabled the GT 540m, so windows doesn't even load the nvidia control panel etc.. Even with just the Intel graphics enabled... same issue.
I’ve tried adjusting power management settings to ensure that power is always at max.
I know it’s not an issue with the external monitor or cables, as they all work fine when the laptop screen is not running... Also, I tested with a Samsung LCD TV with the same issue. The monitor and cables work fine with my PC and other Laptop.
So for some reason, the Intel driver does not want to let 2 screens display at once. And the way the Optimus technology works, I don’t think I can bypass the Intel GPU and use the NVidia one alone.
I tested Win 8.1 with all latest drivers.. and win 7 with a few combinations.. like both the older intel driver + old nvida driver (the ones listed on the Acer site for this laptop).. then I tried new nvidia + a few old intel drivers one at a time.. but the issue remains..
I have this Aspire 6920G with a beautiful 1080p screen.
My only concern is that when I switch between different displays, the size of the desktop objects and icons changes (see caputres below). And that occurs even when I connect my laptop to a 1080p LCD screen, with which the resolution does not change (I checked in the nVidia control panel).
After I disconnect/switch back to the original screen, the icons size is still not right and I need to reboot my computer to get them to their original aspect.
Any solution for this not to change everytime I connect an external monitor?
I don't know if it comes from Acer or Windows 7...
The temp option on Istat only displays the battery and HD is there any other sensors like the CPU and the GPU?
View 5 Replies View RelatedI am looking to update my laptop used for photography. The ideal replacement looks to be the ThinkPad W530 with a dock and display screen. As the W530’s will be used away from home it and monitor will need to be calibrated.
I have been told I can only do this if the graphics card, NVIDIA Quadro K2000M, supports has more than one LUT to both laptop and stand alone monitors be calibrated.
I have a acer aspire m5-581t only displays a green screen ....
View 1 Replies View RelatedI am about to make a purchase on the Studio XPS 16..
However, my main issue is would it be able to drive my 2 Dell 3007WFP-HC displays?..
I am aware that the Studio XPS 16 has a HDMI and DisplayPort built it.. Provided I am able to get all the conversion cables, could this laptop drive my 2 30" monitors at their native (2560 x 1600) resolution?..