I have an HP dv7-6c95dx laptop and the display is out of whack. Black is shown as blue and there are even red dots where some other color should be. LCD screen is a replacement screen and I have already switched out the lcd cable that connects to the lcd screen. When picture is displayed on an alternate screen, the picture is 100% fine. I was thinking the lcd inverter may be busted but I couldn't find a replacement inverter anywhere online for this model.
Just bought this laptop. When I press the power button, the blue light comes on but not the screen. I'm able to charge my phone but that's it. I have to turn the laptop on and off several times before the screen comes on.
I have an HP PAVILION G6-1241EA and I just got a new motherboard and I installed it into my laptop. My laptop turns on but the screen is white. I looked at the wire and it is fine and I tried plugging in some other monitors vga and hdmi but nothing happens. Its been a long time since I've been on the laptop.
I have a HP Pavilion G7-1365dx Notebook and I recently have been having issues with the screen turning white while running Netflix or Sims 3. When the screen goes white I put it in sleep mode and then wake the comupter up again and the screen comes on like normal but if I'm running Netflix or Sims 3 its only a matter of time before it happens again.
Processor: AMD A6-3420M APU with Radeon(tm) HD Graphics 1.50GHz
Installed Memory (RAM): 4.00 GB (3.48 GB usable)
System Type: 64-bit Operating System
No Pen or Touch Input is available for this Display
My Dell XPS 15z model laptop display screen is suddenly turning to noising with vertical and horizontal scattered color lines. This is happening every 15 to 30 min and when the mouse cursor is activating after automatically resuming the screen normally.
Product: HP ENVY TouchSmart 15t-j000 Select Edition CTO Notebook PC, Model C9G48AAR, Product Number: C8P45AV
Problem: After logging in, the screen flashes the Start Screen on and off in random fashion, and is unresponsive to any input.
Effort: We followed the instructions on the HP web site for this symptom (Desktop Screen Flashes Between a Blue Screen with a Blank Taskbar and a Desktop Screen on Startup (Windows 8)), but it failed at step 8 - the Start Screen flashes in Safe Mode with no way to find or enter the "Control Panel" step.
We have also rolled back the system to the last restore point, reseated the memory, and reset the BIOS - all HP recommended processes for video problems.
Current Status: We always look to resolve any problems via the HP web site first; this one had us stumped.
I have an hp pavilion dv6.HP Pavilion dv6-3190ee.My computer crashes and gives blue screen whenever i play videos. The system says that the driver is up to date.
I'm an IT professional working on a client's HP Envy 15t-3200 notebook PC (Win 7 x64, Intel i7, AMD 7700 series)
He said (he thinks) after installing a recent windows update, it started blue screening on him with a graphics error. He restored his PC to factory install, and it was working fine until he installed windows updates and the graphics drivers again, receiving the same blue screen graphics error.
I picked up his laptop. I installed a slipstream of windows 7 that I created. Everything worked fine - as soon as I installed his graphics drivers.
First, I had installed the AMD drivers (from AMD, not HP). I thought everything was working fine, until I checked the device manager and saw that the AMD graphics were being disabled, and the laptop was reverting to the generic graphics driver. I also tried the older driver offered on HPs support page.
I uninstalled the AMD graphics, and installed the Intel graphics. As soon as they were installed, upon restarting I received the same original blue screen error and had to result in booting to safe mode and performing system restore.
When I install the AMD graphics without installing Intel graphics, it reverts itself to Generic graphics. The AMD graphics adapter shows a Code 43 in the device manager, stating that the device has stopped working because it has reported problems.
I played around with different versions of AMD graphics which did not resolve the issue, and I installed different versions of the Intel graphics, which still caused a blue screen.
The PC is working ONLY with the generic graphics drivers, which doesn't work for what my client wants to be able to do (gaming).
I found this - [URL] ..... on the troubleshooting page for this notebook, and tried using this solution which also did not resolve the issue.
I've checked temperatures of the laptop and nothing is anywhere near overheating.
All of a sudden my wifi stopped working. I tried restarting the laptop but it still did not work, after installing windows 8.1.The Product name is: HP ENVY TS 17 Notebook PCThe Product number is: E8A11UA#ABA
I've been having trouble with the screen on my HP Pavilion dm4 2070 USA. Half of my screen has some green/blue dots on it. when i open a webpage you cannot see the dots. This is the first time this has happened.
Ok, so, had my laptop for just shy of a year now. Everything has been working fine until yesterday whe I booted up, the screen rotated a solid green/blue/red for a few seconds then went black (backlight still on) and there it stayed, have re-booted a few times and each go, it goes straight to the black screen, I have plugged it into my TV via the HDMI which works fine can see everything and use as normal.
My PC info: HP Pavilion 17 Notebook PC, F9M02UA#ABA, 5CD4030SBT
I went to the Control Panel > Systems and Security > Power Options - Choose when to turn off display, for Battery and Plugged in I set to 20 minutes. As long as I'm active with the keyboard or mouse I'm fine but if I'm just reading or studying something on the screen, without any activity, the display will shut down in a minutes time, which is very irritating. Is there something else I need to do to keep my display on for a longer period of time?
I'm encountering having just purchased my laptop. None are dealbreakers and I'm not that put off by them but the fact that I'm not able to figure out a solution bothers me. Primarily, no matter what power setting I'm on or settings I change the display will turn off after 1 minute. Ther other power settings still come into play when they should (computer sleeps etc.) but I'm not able to delay the screen turning off.
I was initially trying to get my DVD to play blu rays. I downloaded a different player and uninstalled the HP mediasmart dvd. This didn't work so I deleted the new player and went into restore system to an earlier time and did so. After I restarted my computer it began randomly turning off and by that I mean the screen. It goes black. I click enter or left clidk the mouse (this seems to prompt it) then after 5 seconds or so the lights on the right side start blinking and the display returns. This has happened before and I forget the solution. Also, my battery died about a month ago so I removed it.
some blue screen error came and the display is gone. Laptop is turning on but no display, Checked with external monitor, display is showing. after a day, again turned on the laptop the display came and then after sometime again the blue screen error and now the same problem. Ran the LCD BIST Test it passed, done diagnostic check there wad some HDD error no. 0146. the blue screen error is showing video_tdr_error.
I have an Acer Aspire 5517 that was turning itself off and few weeks ago, which I wrote to the community about. It stays on now, but the screen is black. I was able to update the BIOS before it went black permanently. It does turn on, but nothing comes up on the screen..How do I trouble shoot it, when I can't see anything???
I have a problem turning on my dell n5010 laptop with win7/ubuntu dual boot , I was doing some blogging using ubuntu and I went to have lunch and left it on but when I got back I found my laptop dead with the black screen and not turning on again with only the power led always on then the hdd led for a few seconds but not hearing any beeps and not seeing anything on the screen.
I have followed some solutions posted before but none of them worked.
1 - I tried to remove battery , ac and press power button to drain static electricity then trying to boot with ac adapter only but it didn't work.
2 - I tried the LCD test and tried an external monitor but neither works.
3 - I tried removing the memory modules , cleaning and reinserting but no change.
3 - I tried Dell Diagnositic but the only difference was that I heard 7 repetitive beeps when on the mode but not seeing anything on the screen .
I replaced the screen on this FW and installed a OS every thing was fine for a wile then it would act like it cuts in and out then out for good i can see small light blue screen when it turns on , i connected it to my desktop monitor and every thing is fine shows up good, could the ribbon on the back of the screen be mis aligned or something , i checked under the keyboard and every thing seems fine there
Also i see the wireless button is not working and it states turn on the wireless but with the button not working , how do you go about turning it on ,, must be a physical connection to it, any easy fixes with out tearing it down ?
Bought this pc at Wal-Mart-mart December 2013 it is a hp 2000 notebook pc with windows 8 when you turn the pc on press keys to enter my user password, and after I enter my password screen goes black except the white arrow moved by the mouse pad will not do anything after that
I have a problem with the video being all messed up in my Acer laptop. I made a short video which shows the problem - basically it's a persistent blue colored lines flickering everywhere where the background is supposed to be white and stable. Needles to say it renders my laptop almost unusable.
I have seen it on two different laptops now. Both are HP ProBook 6460b. When the user plugs the laptop into a VGA cable that is connected to a projector, the laptop blue screens and reboots.
The laptop doesn't bluescreen and reboot when connected to monitors, but usually the users are using a docking station when connected to a monitor, or monitors. I haven't seen any issues with plugging in a VGA cable connected to a monitor, but that is rare.
I've tried updating drivers, but haven't had any luck.
DVDs will load successfully and play, but BlueRays will not, even though this computer has a BlueRay player and the Cyberlink software to play them. It recognizes the BlueRay title, appears to load the disk and then returns to the initial screen and does nothing. When I click play, Cyberlink asks if I want to restart or resume playing. Either button I select returns me to the beginning of the process.
my new studio 1737 got the blue screen any help? the laptop is a week old and just been sitting on a desk power is plugged in and only using it for basic use
I have recently bought FW 590FEB, after using it for 5 days, I got three times blue screen problem like this:
A problem has been detected and windows has been shut down to prevent the damage. [url]
1st blue screen, windows 7 shut down unexpectedly 2nd blue screen, windows 7, don't really know since I went to out and find out when I start the pc, it said shut down unexpectedly, 3rd blue screen, windows 7 close/shut down by itself while i was running VLC and utorrent, and it when to the screen where we can choose start windows with safe mode or normal...
I don't know what is happening with this blue screen problem, since this is my first experience with this trouble,
Is it software/drive issue or hardware? Should I restore it to factory setting? I think it it shutdown by itself, every time i use Google Chrome and utorrent.....
Today, I tried connecting an external display to my HP ENVY TouchSmart 15 laptop, via a USB hub, only to discover that using the touch screen points at the corresponding part of the external display rather than the inbuilt one (the displays are being extended). Can this be changed?
I'm using the same 64-bit Windows 8 installation and drivers that the computer came with.
for some reason the on screen display meter for my volume when pressing on the keyboard suddenly disappeared, I would like to get this back. I found this thread in the forum URL.... which another was having the same problem I'm having. The only difference is that I'm using HP Pavilion G7 with Windows 7.
Currently whenever I startup my laptop the display flickers. If windows fully boots or I try to enter one of the startup menus the will flash briefly on the screen and then the display will return to and remain black.
I am able to run an HDMI cable to my TV and it seems to be running fine other than going black with the occasional distorted picture of windows booting.
I'm running a NVIDIA GeForce Go 7900 GS in my E1705 and I've been having some problems with the nasty BSOD.
This is the error message I get:
*** Hardware Malfunction Call your hardware vendor for support NMI: Parity Check / Memory Parity Error *** The system has halted
It only seems to happen when I'm playing WoW... and its getting really annoying. I had thought it was an overheating problem before, but I've been able to keep my GPU temp under control pretty well lately.
My wife picked up a Dell 1537 and has been experiencing blue screen issues. It only happens when the computer is turned on or restarted.
I have checked the event viewer and there is nothing that looks suspicious or outside the norm. I made sure that drivers were updated. I tried running Memtest86 but it closes and starts to load Windows after running for 10 seconds
