So my laptop has been taking a crap lately. First the power supply broke and had to get a new one and now the battery is down to 30-40 minutes. I bought a 9 cell battery off ebay and just got it in. I plugged it in and the laptop says "Battery not recognized, will not charge." Whats up with it? Is there a way to get it charging? I don't have the money to buy the $200 battery from Dell.
I have a had Dell XPS 15z for a around a year and a half and it very suddenly stopped charging whilst plugged in. I didn't notice until the low battery warning came on that the computer had stopped recognizing the battery or the charger. I rebooted and went on BIOS, I don't know much, but I noted that it didn't see an adapter plugged in and it said that the battery is functioning normally. I've plugged the adapter into other laptops and it worked so it isn't the adapter.
I have windows 7 RC installed on my VGN-SR 430J/B. I download Sony Notebook Utilities drivers. I got an error message that battery is not compatiblie, press OK to hibernate. I uninstalled it immediaty, but I may want to install it again. How can I avoid this?
The USB ports can recognize USB mouses and keyboards. However, it will not recognize external HDDs or her Ipod. So far, I've taken the liberty of reformatting her computer but the problem still persist.
I've updated all the drivers to the latest editions and I have tried multiple methods of resetting the USB. (Complete power down of the laptop, Uninstalled the USBs from Device Manager) Does anyone have any suggestions?
Laptop Specs:
Dell Inspiron e1505 (6400) Windows XP Media Center Edition Intel Core Duo T2500 2.00Ghz 2GB RAM 100GB HDD ATI Mobility Radeon x1400 Broadcom 440x 10/100 Integrated Controller Intel Pro Wireless 3945ABG Wifi SigmaTell HD Audio
As this HD was often recommended in Internet forums as a replacement for the built-in Fujitsu 60GB, I bought it and tried to make it run today. Unfortunately, the HD is not recognized.
I used Acronis True Image to copy the contents of the old HD onto the new one, but in Bios only the value for the old HD appears (58GB).
I removed the battery, I tried all kinds of boot-ups to no avail.
I have windows vista Ultimate on my Dell Vostro 1510 and my DVD drive (OPTIARC AD-7640A) acts like cd-rom & doesn't recognize dvd's. I have tried all kind of dvds (+/-/original/copy) but all i got is a noise !
I searched everywhere & tried:
1.Uninstall/installing the drive 2.removing registry keys (upper and lower filters ) 3.firmware update JD06 4.System Restore
I have put an msata SSD on WWAN slot in my latitude E6430s but the system doesn't recognize it!I've tried with 2 ssd (m4 crucial 256GB & mushkin atlas serie) with the same result. Any tip for msata SSD on latitude E6430S?
well I have a l702p 3d, I connect it to my samsung smarTV and it works wonderfuly (hdmi ofcourse), but I have a FLATRON W2243T LG monitor (it only has DVI and VGA ports) I try to connect it using hdmi-dvi adapters but the laptop does not recognize the monitor!
when i try to connect any hp combo headset having same jack for headphone and mic both ..the laptop doesnt recognizes any sound being spoken into the mic. but i can hear songs in the headphone.
I have a 15t j-000. I'm not sure if this notebook came with a dedicated video card. In ccleaner or in the device manager only the onboard Intel graphics appear. But on the notebook has NVIDIA GEFORCE the sticker. It may be a problem of recognition? I've tried installing the driver but says there is no compatible hardware.
My aspire v3 laptop doesn't recognize a 2560x1440 monitor I connect to it - it only gives me the best option as 1920x1080. I've down loaded the latest AMD Radeon hd 7660g drivers but it still won't work.
I have been on Acer's support website but still can't figure out which driver I should update to fix my DVD drive, which does not respond to CD's or DVD's when inserted, even though Autoplay is set.
I just bought ThinkPad T430 and optical bay adapter IB-AC642 [URL] for my ssd 128 OCZ VERTEX 4. I put ssd into optical bay but thinkpad doesn't recognize it. I try with different disc but I have the same problem.
My optical bay adapter with this sdd OCZ VERTEX 4 is working in my another laptop so the problem is only with thinkpad. I tried to change bios settings but it didn't work.
Windows doesn't recognize that my U530 Touch Laptop has a touch screen. Worked okay for the first couple of months. I've tried looking for hardware updates and restarting. Computer is only a few months old, so this stinks.
my new T440p with built-in WWAN Ericsson N5321gw doesn't recognize the SIM-Card. I'm running Win7 64 Bit and in the device manager, I can see the Ericsson device showing up without any errors. Once I launche Access Connections, I receive the error message there's no SIM card inserted and I should insert the SIM and try again. The SIM is inserted as shown next to the slot (although I tried other ways, too). I tried two different SIM-cards just to be safe, both SIM-cards are working in my phone.
My Dell inspiron 6400 has a battery that works amazingly but recently, I noticed a change in the behaviour. Anytime I switch the laptop on, the LED battery indicator shows me red meaning something is wrong even when the battery is fully charged. The battery charges normally even when I intentionally drain out the power and try charging it again. This is just to make sure that the battery charges fine. Infact, in windows, it shows me that the computer is on AC power even when it is not plugged into an AC outlet.
The BIOS shows "No battery installed" and windows tells me the same. Summarily, everything is fine except for the LED indicator showing Red and the BIOS telling me that no battery is installed.
She's been getting a message when she turns it on that the battery has lasted as long as it can last and need to be replaced but she NEVER unplugs the system (
It's a 17" desktop replacement so she can sit in the kitche. (lolstereotypes)) My dad told her that it now wont turn on because the battery final bit the dust but it wont turn on plugged in.
It wont turn on without the battery in it either when it's plugged in. My dad ordered her a new battery she doubts it will fix it
I have a Dell Inspiron 6400 which I bought in the UK new from Dell in April 2007.
The battery is a 9 Cell type (upgraded when bought).
Within the first year it got used on the battery most of the time.
After that it has been plugged in with battery (for backup incase of power outage) about 95% of the time.
Now the power only lasts a few minutes before it totally dies. It charges up to 100% and discharges normally down to roughly 85%. Then this is the strange part, it jumps all the way down to 6% charge .....
I'm working on a Precision M90 for a friend. I've reinstalled the OS and all drivers from the Dell website.
The problem I'm having is that even before reinstalling everything, the computer is not recognizing the battery.
I've tried searching and came up with nothing. It doesn't show up in the BIOS or anywhere else. None of the lights on the battery are showing up either.
The indicator on the laptop shows that it's in trickle charge mode, but this is clearly not happening. When I unplug the AC Adapter, it dies within a couple minutes.
The computer will run without the battery installed on AC power only. I tried to flash the BIOS, but of course I can't because the computer cannot recognize the battery.
I have an xps12 that doesn't recognise its adaptor, runs fine on AC but batter is now totally dead. I tried a different Dell 45W adaptor (borrowed) and it charged the battery, I then bought a cheaper 3rd part adaptor - which also worked for a week or so.
Now am back to unrecognised adaptor, no charging. BIOS is version AO8 but even if there is an update I can't install since my battery is on zero. Battery utility (Fn F3) indicates my battery is healthy and performing normally, but charging is disabled and I don't see any obvious way to enable it.
I recently was given an HP dv2125nr laptop that needed a new motherboard. I purchased a new one and replaced it and the laptop was up and running. I was happy and figured that I had just salvaged a decent laptop.
When I first turned it on I noticed it wouldn't run off battery power but thought, no big deal it just needs charged. That turned out to not be the case. I went about reinstalling the operating system using the recovery partition and didn't give much thought to running it on battery til I noticed that the power icon said "On AC Power, Charging" It didn't give me a percentage however, and when I double clicked to inpect further I noticed that the battery icon under battery #1 had an X through it, and it also said "Total Battery Power remaining: Unknown".
At this point I updated the BIOS because I had seen a few forum topics that suggested this, I also made sure I had the most up to date drivers off HP's site for all hardware. Another step I took was to uninstall the "Microsoft ACPI-Compliant Control Method Battery" then scan for hardware changes and let Windows reinstall it. None of this worked.
I then assumed I had a bad battery on my hands, I ordered another one (not an HP, a cheaper one) and when it came I plugged it in overnight to charge and after about 12 hours turned the laptop back on to see if I had a fully charged battery, I did not!
It was acting in exactly the same way the original battery had acted. The only difference that I could notice was, that on one of my many reboots the icon under battery #1 in the Power Meter window only had a single red slash through it, instead of a red X.
Things I have tried:
1. Updated BIOS 2. Updated all drivers 3. Fresh install of Windows XP (again after the original recovery install) 4. Unistalling the "ACPI-Compliant Control Method Battery" in Device Manager. 5. Ran HP Battery Check Utility, has a divide by zero exception upon startup, then says no battery is present. 6. Booting directly to BIOS and allowing it a chance to charge overnight. 7. Swapping both batteries (no difference). 8. Taking back apart casing to make sure there were no loose wires.
My only thought next would be that either both batteries are bad (seems unlikely) or that there is a problem with the new motherboard. The motherboard being bad would surprise me, as it is able to run just fine without using battery power.
Aspire M5-481T-6488 - Does not recognize AC is plugged in. Does not charge battery.
Laptop is about 2 yrs old. Running on the origninal Windows 8 that came with it. Had the same issue when it was first bought. Sent it in to Acer. Came back with no report/ details. Worked okay. Until recently.
Noticed that orange light comes on when it feels like charging and stops charging at 35%. Charging is a hit and miss thing, mostly miss.
Tried:
Sticking a pin in the "battery reset" hole on the back
Uninstalling the "Microsoft API" battery
Removing battery to see if it'll work without it (it has an internal battery)
I have an older Inspiron 6400 (looks like the 1505) that isn't charging the battery. The bios indicates that the battery is charging, and that it is performing normally. There isn't a red flashing battery indicator, but when the laptop is powered on there isn't any "green light" indication of the battery, either. The AC adapter performs normally ( Charger is a PA10 (90watt) and it works fine on my D800, and charges that battery normally).
What I don't understand is why the BIOS indicates the battery is charging and that the battery is performing normally. However, when I have the system up and running there isn't a green battery indicator light on the button strip. Let me clarify that statement. During the initial boot phase of start-up there is the green indicator light on the button strip, but as the OS finishes loading this light goes out and the battery doesn't charge.
Could this be caused by a faulty Bios update, or is it something with the battery charging circuit of the motherboard? The laptop operates normally when using the AC adapter, just no indication of the battery charging when the OS is fully loaded. OS is Windows XP Pro (SP3).
My friend's macbook (white plastic, 2.0, napa/core2 before santa rosa platform) isn't starting, and I have no idea why. He initially asked me to replace the top and bottom casing. I accepted, and ordered the parts. Around the time they were supposed to come, I took the computer apart completely (required for the repair), but one of the parts was delayed, so the computer sat splayed on my desk for a week. I didn't exactly stack textbooks on it, but it also wasn't covered in anti-static wrap. So, now, I finally got the part and put it back together, and the computer doesn't start. At all. The screen doesn't go grey, the 'sleep' light doesn't turn on, the fan doesn't start - nothing. The magsafe light is green, so the power is going in. It's also worth noting that I have no battery for it, so it's all on A/C.
Does anyone know what's wrong? My two hypothetical solutions are (a) I need a battery, or (b) the logic board is dead due to static.
How likely are each of these scenarios - especially the logic board one? How possible is it that it was static overloaded?