Dell :: Mouse Doesn't Respond 6400
Jun 8, 2009I have a werid problem with my mouse. It like it has a mind of its own or doesnt respond when I use it.
I reinstalled the drivers and I am still having the problem.
I have a werid problem with my mouse. It like it has a mind of its own or doesnt respond when I use it.
I reinstalled the drivers and I am still having the problem.
My MacBook Pro is behaving funny after wrestling with my wife. Unfortunately the laptop was on a table side when my wife jumped on me and we were wrestling away.
She got my arm and twisted it behind my back i was desparate to get out of the arm bar and neck choke she was applying on me. In desparation I got out of her dealy UFC choke but as a consequence I kicked the laptop off the table by accident.
The laptop flew a few metres and landed hard on the floor. As you could see, this is no way to treat the laptop. Now my laptop is behaving strangely the mouse doesn't respond as it used to.
Will this be covered under warranty?
I've got an acer aspire 5672 and I can't get passed my login screen anymore. The keyboard and touchpad do not respond.
I tried in safe mode and there they do.
There was one time where they did respond but then they stopped right after loggin in.
The system seems to keep running though, as the cursor blinks etc, it's just that I cannot do anything.
As it does work in safe mode, it must be a software thing, no?
I have a Dell Latitude E5520 and lately it has been extremely slow, and characters on screen tend to lag far behind my keystrokes occasionally not appearing at all. Sometimes when I click on a button it will lag for several seconds and then go through, other times nothing will happen at all and I will have to click the button again and it works. Recently the laptop was taken on a plane and the in-flight wifi was used, that is the only thing done recently outside of the normal routine.
I have booted into safe mode and the lag still occurs. I have antivirus software installed and up to date.Â
I recently purchased a new Inspiron 15 7000 (7537) with Windows 8.  I'm getting used to Windows 8, but really struggling with the integrated touchpad.  It's getting so frustrating I'm considering returning it.  The problems are hard to pin down, but in general:
-I often get the right click shortcut menu, when I'm just trying to click. Â I've even changed both the right and left hand buttons to both be "click" (and neither be shortcut menu), but I still get the shortcut menu a lot.
-Sometimes the cursor gets stuck and doesn't respond to movements. Â I've tried adjusting the touch sensitivity and disabled palm detection. Â No change.
My Inspiron 15 r suddenly hangs and doesn't respond (no cursor movement, no keyboard response, nothing works).
I will have to restart the system every time.
So my laptop has been taking a crap lately. First the power supply broke and had to get a new one and now the battery is down to 30-40 minutes. I bought a 9 cell battery off ebay and just got it in. I plugged it in and the laptop says "Battery not recognized, will not charge." Whats up with it? Is there a way to get it charging? I don't have the money to buy the $200 battery from Dell.
View 10 Replies View RelatedI have a m1330 and it doesn't fit in my expressCard/54 slot. I'm baffled, the specs say it should fit but it sticks out about 1/2" and won't go in all the way not matter how I try to jimmy it in.
View 3 Replies View RelatedI bought precision m6700 and WM713 wireless mouse.I turned on my mouse, connected to my precision by usb which came with mouse, and it paired with my computer, device and printers shows there is WM713 wireless touchmouse. But after these steps my mouse didnt work. Mouse was turned on but doesnt track my pointer or click every role of mouse. Im using windows 7 64 bit. And when i go toWM713 wireless touch mouse application, There was battery level section but it says not connected, but i already connected my mouse by usb to my precision.
View 6 Replies View RelatedI have also already tried turning off and on again the "turn off mouse pad" button that the computer has. And it's only sometimes when I boot up the computer it won't responed, then I have to turn it off and turn it back on again in order for it to work.
View 3 Replies View RelatedJust bought an Aspire ES1-511. Not my first Windows 8.1 laptop, but my first with UEIF firmware.
Â
I've been trying to boot Driveimage from CD to do an offline backup, and guess what, it wouldnt recognise the CD as bootable. Fixed that by setting the boot type to "Legacy" in the BIOS and it boots fine.
Â
My problem is that the mouse doesnt work after booting from the CD. Watching the behaviour of the mouse, it powers up when I press the power button, but powers off immediately the POST completes.
Â
If booting Windows from the HD, power to USB is restored as soon as windows loads to the lock screen.
The left mouse button on my laptop (model 15-d037dx) doesn't click when I press it. The laptop is almost brand new, can I get a replacement button?
View 5 Replies View Relatedi recently upgraded my g500 from windows 8 to windows to 8.1. But ever since then, my mouse does not work and the keyboard only works after standby. I tried to restore to factory defaults but that hasnt worked.
View 5 Replies View Relatedi have a Envy TS m7 computer with windows 8.1 64bit. I purchased a z8000 bluetooth mouse but i can't get my computer to see it. i have checked the the box "allow bluetooth devices to find this PC".
View 9 Replies View RelatedMy friend's macbook (white plastic, 2.0, napa/core2 before santa rosa platform) isn't starting, and I have no idea why. He initially asked me to replace the top and bottom casing. I accepted, and ordered the parts. Around the time they were supposed to come, I took the computer apart completely (required for the repair), but one of the parts was delayed, so the computer sat splayed on my desk for a week. I didn't exactly stack textbooks on it, but it also wasn't covered in anti-static wrap. So, now, I finally got the part and put it back together, and the computer doesn't start. At all. The screen doesn't go grey, the 'sleep' light doesn't turn on, the fan doesn't start - nothing. The magsafe light is green, so the power is going in. It's also worth noting that I have no battery for it, so it's all on A/C.
Does anyone know what's wrong? My two hypothetical solutions are (a) I need a battery, or (b) the logic board is dead due to static.
How likely are each of these scenarios - especially the logic board one? How possible is it that it was static overloaded?
i have a ACER Travelmate 2482WXMi, i have done a fresh install of windows XP home, i have done a full format of the hard drive, but i have issues the touchpad will not work only in safe mode. I have installed most of the drivers through safe mode, but the mouse will only work when i connect an external mouse when it's in normal mode.
Also i do get some bad sectors on the hard drive, and it takes over 2mins to shut down the comp. I havent installed programs yet, except PC Wizard 2008. Also the laptop is not the base model with 512MB ram i have added a 1gb stick and it works fine. I am thinking maybe its the hard drive. If
Dell Inspiron 1764 Laptop keyboard  is slow to respond and has typing lag ?
View 3 Replies View RelatedReally odd issue. My touchpad does not respond at all after I wake the computer from sleep mode. The mouse buttons do not work and the touchpad is completely impossible to get to move. The only solution is to shut down the computer entirely and turn it back on.
Does anyone else have this issue? I've re-installed the mouse drivers and it keeps doing it. There is no way to re-create the problem; it just happens totally randomly (and usually very inconveniently).
I have a Studio 1737 running Windows Vista Home Service Pack 2. I'm running the latest BIOS and all of my drivers are up to date.
When the AC adapter is unplugged and I'm running on battery power the whole system lags. It also turns of when unplugged without warning after about 15 minutes.
Also, I get these error messages in my event viewer a couple of times an hour:
Log Name: System
Source: ACPI
Event ID: 13
: The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.
I'm guessing these are all connected.
I am not very good with PCs although I have changed the Power supply to my PC in the past!I have a Dell XPS15 Laptop (Specs included at the bottom). Will adding memory or changing the Graphics card work at all? Can I add any memory at all to make it work faster?
Specifications: XPS L501x (UK, FCG01) – i3-370M (2.40Ghz, 4Threads, 3M cache), Genuine Windows® 7 Home Premium, 64bitXPS L501x (UK, FCG01) – i3-370M (2.40Ghz, 4 Threads, 3M cache)Memory 3072MB 1333MHz Dual Channel DDR3 SDRAM [1x2048 + 1x1024] Video Card 1GB NVIDIA® GeForce® GT 420M Graphics Card Hard Drive320GB (7,200rpm) Serial ATA Hard Drive Microsoft Operating System Genuine Windows® 7 Home Premium, 64bit Wireless Intel® Centrino® Wireless-N 1000 (EUR)Cable Primary Battery6-cell 56Whr Lithium Ion battery Processor Intel® Core™ i3-370M (2.4Ghz, 4Threads, 3M cache)15.6 HD WLED TL (1366x768) 720pPower Supply90W AC Adapter
Just bought my hp 250 G3 – windows 7 laptop and the function keys (F2/F12) do not seem to respond -
View 9 Replies View RelatedLaptop 3 years old and touchpad slowly stopped responding one night.
Downloaded new driver (ALPS Touchpad v7.1007.115.102. A05) no less than 3 times and had a partial success. Now right half of touchpad is ok but left half can only respond to up/down finger movements.
Run Dell diagnostics and all hardware is ok.
Run a full antiVirus scan and ok. Laptop says new driver is ok and running ok.
Touchpad does not work in BIOS and done a full diagnostic check and said the touchpad is fine!
Use of mouse is ok so not the end of the world!
Back to factory settings?
When I am working on my laptop off battery power and I shut the monitor without shutting the pc down, at times it seems like the pc is in sleep mode but will not respond. I have to (I guess you would call it hard start it), reboot it to get it working again. Usually the screen is black when I reopen my laptop. Today, browser was barely visible. What is going on with my pc?
View 2 Replies View RelatedI have tried creating a recovery disk using the ‘Acer Empowering Technology’ but every time i click on the “create factory default disc” button, the “Acer eRecovering Management” freezes and i get an error message saying : Acer Empowering Technology Framework launcher has stopped working. A problem caused the program to stop working correctly. Windows is collecting more information about the problem.
Another thing, i know how to unhide the 'PQSERVICE' partition, but i'm wondering if it's possible to create these discs directly from the partition without the need for the faulty 'eRecovery Management'. If yes, how?
My keyboard has started being erratic and not responding when some keys are pressed. I use the notebook mostly as a docking station, with a larger monitor and separate keyboard, so it's not an issue of the keys being misused or over-used. It's not related (as far as I can determine) to caps lock or any interference with USBs. It happens when I'm booting up as well as when I'm typing in a document and with nothing attached to the computer other than the power cable.
View 2 Replies View RelatedAssuming there is a setting to change this. At least I hope so. Synaptics. y510p
View 2 Replies View RelatedI currently have a Acer Aspire V3 Laptop that runs on the most current version of Windows 8. Ran perfectly fine last night without any kind of problems. Went to get on it this morning and the power button won't respond. When it is plugged in, the LED light shows that it's charging, but when I try to turn it on, the power button doesn't respond. Every few presses, the power button lights up for a split second, then turns off. The screen never responds to the power button being on for a split second.
View 3 Replies View RelatedI play dvds on my hp 2000 windows 8 cyberlink and it won't respond....
View 2 Replies View RelatedThe touchpad on my Inspiron 15z freezes-up a few times a day; the cursor suddenly won't respond and buttons stop working. Restarting the machine usually fixes the problem, until the next time...
View 10 Replies View RelatedThe model is a HP Pavilion 15-n278sa. My laptop shuts down randomly when it is clearly completely cool, when it has shutdown, the power button will not respond, and the laptop will flash on, and shutdown immediately if it is moved/picked up/tilted, while it is off.The laptop is increasingly getting more unstable and I'm unable to use it...
View 8 Replies View Related