For my M1710 what's a good setup and resolution to use? I really hate how it never really shows you what your current settings are. IS that a bug? Or is that just me?
If other M1710 user could post up there optimal settings it would be much appreciated. EVerytime I run their optimal settings it sets my resolution to 800 x 600. between 800 x 600 and 1900 by 1200 or whatever there are alot of possibilities so any ideas would be great.
I am trying to detemine whether I have an LED WUXGA screen and i got some good info from jet757f in another thread that said that LED screens have 15 brightness steps and that CCFL have only 7 brightness steps.
listing:
screen resolution:
LED /CCFL:
# of brightness settings:
panel model:
MINE ARE:
screen resolution: 1920 x 1200
LED /CCFL: ?
# of brightness settings: 15
panel model: LGD0135
Just wondering what we use in terms of Power Management, whether its part of the OS or its Dell's Control Point Manager, and whether it affects the fans kicking in or not under comparable settings.
I use an M4400 & an E6400, both have the latest BIOS revisions, and both use Vista's native applet, selected to "Balanced".
I don't use it very much; it's more a backup machine and the occasional Skype to grandkids. Been having a problem with being unable to use windows update; keeps getting an 8007005 error.
Googling reveals a lot of folks with the same problem, some different fixes, and mixed success stories. I've tried several of the fixes with no luck and probably made things worse than they were before (now Defender won't update).....
I'm planning on buying a Dell Studio 15 and upgrade the standard 1280x800 screen to a 1920x1200 one(for games, videos etc).
My concern is, with this display setting, should I find the icons/texts etc be too small for everyday general use, what other resolutions setting are there to choose from?(the 1920 screen) Would 1440x900 be available or does it go straight down to 1280x800? Can any Dell owners confirm this please?
Likewise, if I upgrade the display to 1440x900, I assume 1280x800 will be available as well?
This may not be a question that is specific to my particular notebook, or even to Dell but then again, it might be; I'm not sure.
Previously (that is, before I recently reinstalled Windows) my computer used to have some sort of "memory" for volume settings.
I normally set the volume to around 20 when using headphones and set it to around 100 without headphones.
My computer had a "memory" for this in the sense that whenever I plugged in headphones the volume would automatically set to 20 and when I unplugged them, it would go back up to 100. However, this no longer happens and I don't know why
Whenevr I remove my e5600 from its dock to use the laptop on the go, the touchpad always goes back to its default settings.
I cant figure out why, but im thinking maybe my wireless Logitech mouse/keyboard that I use while docked has something to do with it?
I finally received my E6400 machine.
Later on today I will update the bios to A15.
In the meanwhile I'm looking for the optimal bios settings for best performance.
Following a swap of hard drive between two E4300 (asked by the dell support...), the TPM and encrypting settings have been erased.
In order to retrieve the functionality and access to encrypted files, I did the following:
System restauration at a date before the fatal swapping of hard drive
Bios reset of the tpm and reinstallation of all the tpm software .....
Need to change the touchpad settings on my Dell XPS 14Z, running Windows Professional XP 64.
Online searches to find the touchpad settings have indicated touchpad settings could be accessed in the Control Panel under Mouse options or via an icon in the taskbar.
Unfortunately, none of these appear true. Control Panel>Mouse does not have any touchpad tabs and there is no touchpad icon in my taskbar.
Attempts to find the user manual for this model have also proved fruitless. The link on the Dell site for the XPS 14z directs me to a user manual for a different model laptop (M1330).
In the BIOS on my Latitude D630 there is an option for the CPU to be seen as a single processor or as two processors. The CPU is a T7500 Core 2 Duo 2.2GHz processor.
The BIOS info states that some applications may run faster when it is seen as two processors. Can anyone give me any insight into what these options actually mean in terms of PC performance ?
Also, what types of application would be impacted by the single processor or two processor options ?
I've just bought a used Dell Latitude D830 (UK, XP SP2) and find the touchpad won't scroll. Otherwise pad, trackpoint and buttons all work ok.
I went into Control Panel assuming that the scroll areas weren't set up. Not so - unlike on my old C640, there are no separate Synaptics set-up tabs. Nothing - and it claims there's a Microsoft mouse plugged into PS2 .
Is there anyway to change the dpi / magnification settings in Windows 7 without having to log off and back on or restart the machine?
I'm looking at a Studio 1557 laptop as a desktop replacement with a 1080p (1920 X 1080) screen which I think will make the text and icons quite small.
I can easily change the DPI to 120 (125%) or 144 (150%) and make everything readable which is great however when it's at a desk it's going to be connected to two 20 inch plus monitors and these require the normal 96dpi (100%).
The problem is the machine will be frequently connected and disconnected and having to close and reopen all applications to restart the machine properly is a real pain.
Windows XP used to warn you about having to restart but if you didn't things were still resized. With Win 7 nothing happens until you do.
I just got my new system yesterday, and the screen is mighty bright, with very bright and detailed colors, which seem fake and cartoonish...
It's a beautiful screen, just bright... The colors seem like they are highlighted, and not natural.
Who has the correct setting for this monitor?
i have a m1730 with 2.4 t7700, 8700m GT 256mb sli, 4gb rams, 200gb 7200 rpm raid 0. i used riva tuner and overclocked video card and memory to 750, 1500, 975 and got a score on 3dmarks06 of 93xx-94xx.
is there any way i can reach 10000? or is this pretty much maxed out?
Please post only setting of your screen settings, just having problems finding the right colors.
View 3 Replies View RelatedI've just received my XPS11 and think it's a beautiful machine... however, the one grief (everyones main grief with this unit it seems) is the keyboards sensitivity setting.
By default, when the computer starts, when you open up the Dell Keyboard (F10), the keyboard sensitivity is set to midway.... i constantly need to keep sliding it to lightest setting (makes it almost usable at this point). Where in registry this setting is kept ? or how i can permanently set it to LIGHTEST.
I installed the touchpad driver. I am not able to access the touchpad settings when I click on the ones with the yellow arrow. Nothing happens. I want to turn off tap to click.
View 6 Replies View Relatedmy computer is a
Inspiron 14R (N4010, Early 2010)
MS Windows 7 64 bit
I got rid of multiple malware problems, but I still don't have sound when going to youtube e.g., as well as can't install anything. Therefore I think the best thing to do is to reset the computer to factory settings.
I am using Dell inspiron n4050 model laptop. While documenting the cursor frequently jumps to a new location. i need to disable the touch pad of my laptop. i had utilized the browser and came up with the fn+f3 key option to enable and disable the touch pad.
But the hotkey for this option is not working properly. all other hotkey options are working as normal.
The mice settings window the dell touchpad tab is not found.
Just installed 3dMark06 and Fear2. When I ran 3dMark06 i got ~11.800 points, after reading on several sites and comparing the scores it seemed pretty average/ even good.
I then tried Fear2, I maxed out the setting 1920x1200 / High / 0x AA /4xAF, it ran pretty smooth but then the trouble started..
It began every 5 or 6 seconds to stutter, the game would stop responding and the screen would freeze for a second..
Thinking it was the settings I put it down to 1280 and medium, no difference in fps and the stuttering was still there..
I tried Counter-strike, Prototype, Fallout 3 and a couple of other games, still the stutter in every single game..
In the nVidia contol panel I have disengaged the V-sync.
My speccs are 8800GTX SLI, T9300, 4gb Ram and Windows 32 bit Vista. I have updated all the drivers to the latest drivers and I have also made sure that PhysX is disabled.
The machine just came out of the factory so all the Dell software is still installed.
How can I manage to fix the stuttering problem?
I am also thinking about going over to Windows 7 seeing that it is free and supports 64-bit.
I'm currently working out an optimal set of settings to get this thing running at an average of 40-45 FPS with eye candy and thought I could get some ideas here of where to go. Could we have those users with the game post their settings and driver versions and what performance you're able to land?
And what specific settings dictate the nature of the explosions? I'd be satisfied maxing those out while keeping the other things at "Mainstream."
forgot to mention the game is being run in dx9 mode
Right everyone, after much searching and screaming and tearing my hair out, ive managed to get the dell 5530 wwan to work on a vostro v13 with windows 7 32-bit.
this guide is mostly for those who have downloaded countless number of drivers, and been told error 23000 - this is not for your device .........
Can anyone tell me how to get back the factory settings..
i have studio1537 model...i have some problem in my system to fix that i did formatted the system and deleted the recovery partition..
can i get back to the onginal settings which i got it from the factory.
I finally found where the hue and saturation setting are in the ATI ccc which nobody has been able to discover, including Dell who had already agreed to replace my screen because of the reds... gotta call them tomorrow to cancel. Am so happy with my screen now!
Anyway, I installed the latest ATI drivers from the AMD website and used the mobility modder to mod them so that they can be used correctly with the laptop vga card (although I'm sure that this option is in every version).
1) In the ccc switch to "Advanced" mode
2) At the top left where there's a menu titled "Graphics" with a small arrow next to it, choose "Desktops & Displays"
3) On the bottom left there should be a small picture of a laptop with the number "1" next to it. Right click on the picture of the laptop and choose "Configure"
4) It should now open a new screen. Just go to the middle tab "Avivo Color" and play around with the Hue and Saturation.
Here are my current settings:
Avivo Color:
Hue: -4
Saturation: 83
Desktop Properties (Also under the top left menu):
Set color correction for: All Channels
Gamma: 1.00
Brightness: -50
Contrast: 90
When you recieve a laptop from dell brand new you turn it on it goes through
welcome options and account creation after that you are welcomed to windows with all drivers installed and fully up to date.
well i have a very old dell demension 3000, i saw restoring the os with a hidden partition/program created by dell can restore to factory settings. but the thing is if it fails i dont want to go by windows xp/windows vista os operating disk/activation key
View 4 Replies View Relatedcannot access the Dell back to factory condition in my young daughters Inspiron 6400, Ctrl - F11 I get no response except a load bleeping, is there any other way of accessing it?
View 4 Replies View Relateda few weeks ago (I think after the last windows update) all of a sudden my touchpad settings were gone. I've had this computer (Inspiron N5110, Windows 7) for about 9 months and it's been great until now. The touchpad is now super sensitive and the cursor seems to go anywhere it wants, probably because my palms barely brush it when I'm typing but I usually feel like I am not touching it at all. It will open whatever the cursor is hovering over, even when I don't click it. I tried to find the settings for the touchpad under Control Panel>Mouse but there is nothing for the touch pad.Am I just not looking in the right spot for the settings?
View 5 Replies View RelatedI forgot my dell inspiron 1440 laptop BIOS admin password so i can not change bios settings. reset my bios admin password
View 4 Replies View Related