Dell :: FX1600m In E1705/9400please Share Your Experience ;)
Jan 7, 2009
I have been browsing and searching the forums but have not found many comments on modding an Inspiron 9400 with an FX1600m.
I hope to gather the few (?) fellows who have done this for exchanging benchmark results and share possible issues.
I have to 9400s, and I have modded one to fit the dual heatpipe - I am running that one with a 7900gtx, but it's dying.
Instead of going for another 7xxx series card, I would rather put in an FX1600m. I don't have the card yet, though, so I would like to know how happy you guys are with this setup, and what other mods you needed to get it done.
Read that BIOS had to be flashed - A09 is the latest motherboard BIOS that I know of, and haven't found any modded MOB BIOSes so far; and I only have BIOS for 7xxx VGAs. Is there sg new, did you flash it to 8700?
View 4 Replies
ADVERTISEMENT
Aug 12, 2009
I'm in the process of upgrading my e1705 into an m1710. My e1705 consists of 4gb ram, 250gb 7200rpm, t7200, 9-cell, n-wifi, and an integrated piece of .
I've had this laptop for like 5 years now with absolutely no trouble except for a dead battery and charger. Spicing it up to the m1710 seems way cheaper than shelling out a couple grand on a new laptop.
I'm buying m1710 parts and so far i got everything besides the gpu. I bought the wuxga, motherboard with base, light, fans, and pa-13.
Bought all the parts super cheap on ebay and selling my e1705 parts so basically not losing any money except for the gpu ....
View 8 Replies
View Related
Oct 2, 2009
I purchased an FX 1600M to replace my fried 7900GS. BIOS didn't recognize it. At the beginning of the boot screen I realized that the card was "engineering sample" and I couldn't install nvidia drivers by double clicking on the setup file because no compatible card recognized. I only could install them from the device manager by updating drivers and pointing out the extracted drivers folder. I use A09 BIOS and Windows XP.
Everest and gpuz say that the card is Quadro fx1600. On every speed setup ati tool showed artifacts, even with downclock!
However the card managed both 3dmark 05 and 06. Actually with good marks.
The card had 2 heatpipes but since my case needed modification I decided to change heatpipes with my old GF7900 gs. With 1 heatpipe I installed it in my Dell E1705. Can it be a heat problem that atitool showed artifacts? I also use i8kfan to check heat run and while gaming temperature went up to 84 degrees. Idle temperature was 60 degrees (corrected with gpuz). I will modify my case soon and install it with 2 heatpipes again.
Does anybody know about "engineering sample" gpu's?
View 15 Replies
View Related
May 19, 2009
just wondering how you guys get on with modern games with the ati gpu as i may have to get one of these machines and any performance indicators would be nice to see
View 8 Replies
View Related
Jan 16, 2009
I am trying to find an information of how big is VAIO's share in laptop world?
I have read MAC's is 17%, which seems so high to me.
View 6 Replies
View Related
Apr 23, 2013
Im trying to set up an ad-hoc connection to share internet between my laptop and another laptop but it will not let me turn my internet connection sharing on, when i go into adapter settings my wireless network connection has a red 'X' next to it and if I run the diagnostics its tells me 'problem with wireless adapter or access point' and I cannot connect to any wireless connections either, i have an internal Dell Wireless 1702 802.11 b/g/n on windows 7 home premium edition, All drivers are up to date and I am using a Del N7110.
View 3 Replies
View Related
Jun 24, 2009
My work has a site license for photoshop cs4, will the serial number work with the mac version?
View 3 Replies
View Related
Apr 5, 2009
I have an Acer Aspire 5735Z and i want to increase the video memory share but in BIOS i can't acces the option to increase it. I have the supervizor password and i can change every thing in BIOS exept for the video memory share.
View 7 Replies
View Related
Mar 9, 2009
I'm currently using an external disk as back-up with Time machine and I also put movies on it to declutter my laptop. I recently noticed when trying to share a movie with a friend that it's not detected by PCs.
Is there a way to do so without having to erase the disk?
View 10 Replies
View Related
Dec 20, 2014
Acer Aspire V3 731 intermittent display shut down, causing me to do a hard shut down. Display comes back on reboot.
Â
I have run memory and gpu tests showing good results.
Â
Thinking I need to change allocated share of RAM in BIOS up from 128. Cannot access that field. Cannot find internet solution to get to that field. Thinking perhaps setting it to 256 or 512. Do not game on this computer. Do not do heavy post processing of images. Do multi task.
Â
Is this intermittent shutdown of the display a known issue?
View 3 Replies
View Related
Jul 24, 2014
On my new X1 Carbon, I can only do CIFS sharing via Ethernet. If I connect via WiFi, sharing stops.
Both Ethernet and WiFi are listed as private networks, so I would think they have the same settings. How can I get Windows sharing to work over WiFi?
View 1 Replies
View Related
Nov 3, 2009
So I decided I would stick with Dell for my next purchase since my family and I have owned a couple of their models in the past. Our old inspiron and latitudes have held up for at least 4-5 years each so this a fairly easy choice for me to make.
10/28/09 - Ordering a new Studio XPS 1340
I was on the phone with Dell EPP and configured my setup for a fully loaded SXPS 1340 after about 2 hours of back and forth with the representative and manager (I am a bargain hunter). Blah blah blah the manager finally agrees on $1350 shipped (roughly a $200 discount after EPP)......................
View 10 Replies
View Related
Feb 22, 2009
I've noticed drivers for Red Hat Linux are available, does anybody tried to install it in the Precision M6400
View 4 Replies
View Related
Oct 13, 2008
To date, I have had X4 Motherboard replacements, X2 Screen replacements and X2 batteries, and I'm fed up with Dell. My computer is running all latest drivers and software etc, but is running really hot. The palmrest gets really hot, even if the CPU is idle. I have to retract my hand from the computer base after a few seconds because it is so **** warm. I'm not sure what is causing the heat - it was never this warm before the latest motherboard replacement, which was due to a fried GPU.
Is it really worth getting a new motherboard and going through all that hassle, if it will just happen again? My graphics in Flight Simulator and all games have become terrible (i mean, terrible) - with few other processes running, since I bought it a year ago. This is a concern that I can no longer play games on this Nvidia Chip.
Do you guys think I am right in thinking that my GPU is just messed up and chucking out crazy amounts of heat? (It is 65 degrees celcius idle)
View 10 Replies
View Related
Jan 10, 2009
just got windows 7 BETA 32x today and i have to say:
IT IS SIMPLY AWSOME!!!!
the new looks, the really snappy and smooth interface, the new features, and the fast as hell startup time... WOW!
i was going to add some pictures but my connection is acting up again and i cant seem to upload anything so il just write some outstanding features:
1- the speed, its just so much faster than vista.... as simple as that, and it uses 630 megs of ram when i actually have 4gigs on this comp, while vista used 1.2 gigs, and as i said, the startup time is amazing .....
View 10 Replies
View Related
May 11, 2008
With my 1730 I can get a 5.1 score. The 5.1 is because of my ram which gets a 5.1, I am upgrading and adding another 2gb so this will not be a bottleneck anymore. My next highest score is a 5.2 for my hd. Is there anyway to get a higher score for my hd? I have a 7200rpm, would adding another hd, and putting them in raid somehow make a difference? I would at least like to figure out how i could make the hd faster, after that my next lowest score is not until 5.4, and if i had a score of 5.4
View 15 Replies
View Related
Feb 8, 2010
Well, I think it's more usual for people to leave comments over bad experiences than good experiences, so I think it would be good to do it.
Few days ago I had a problem with a XPS 1330 which suddenly stopped working. Something related with a shortcircuit with the power supply.
I checked guarantee and happily found that I bought the 3 year extended guarantee with the laptop and it was on the third year so i called customer support and after some small checks they decided it had to do with the motherboard so they ordered a replacement for me for the next day.
I even messed with the asking to come later as I wanted to backup data (just for security). Did the backup and called them again few days later. Again I had no problem, next day a technician came to my home and changed the motherboard. In matter of minutes i had the laptop working again.
View 3 Replies
View Related
Aug 23, 2009
Just wondering if any of you had any previous experiences with Dell Escalation Officers? One of them is supposed to call me about whether I would be able to exchange my E6400 for a different model.
View 10 Replies
View Related
Dec 2, 2009
How many of you have ordered the laptop from India? What is your experience?
I ordered on 13th November and got an EDD of 26th November. Called them up on 26th November and they said it will definitely come on 1st December and offered me a free blutooth headphones.
I called yesterday and today and the dell representative is not picking up her phone. Called the direct number and they said it hasn't come cause of a change in shipping address. I never once changed my shipping address.
View 10 Replies
View Related
Dec 16, 2009
Ordered an Inspiron 15z from Dell EPP for $678 on 12/10. Initial estimated delivery date: 12/28.
Yesterday, I noticed a small price drop ($16, lol) with the use of a coupon code, so I called up EPP customer service about the 30 day price guarantee. The rep, a nice guy from India, informed me that technically, the price guarantee was not valid with coupon codes, but he gave it to me anyway.
Today, I received a call from the same rep saying that the system was shipping out today, with an estimated delivery of 12/18...10 days earlier than originally estimated, and that I should see the price credit on my CC statement within 48 hours.
View 6 Replies
View Related
Oct 27, 2009
I have 8gb RAM on my laptop and so far no problems installing all the programs and drivers. Win7 did detect the drivers needed and accurately targeted Dell's website for the appropriate drivers... card reader and such. Programs loaded so far:
Office 2007, Acrobat Reader 8, Adobe CS4 (both 32/64), Panorama Factory, Roxio Creator 2010 Pro, Slingbox, Quicktime. Will load more but it took me almost all day to do these ones. Future programs includes Canon's Zoom Browser and other web browsers
View 4 Replies
View Related
Mar 11, 2009
Why not share how 7 run on our precisions m6400 ?
I'm using win 7 build 7048 x64 working really well (way better and faster than XP sp3, however I never thought to use Vista..).
there was some issues with build 7000 and Adobe CS4 production apps (like premiere, encore, AE) now solved with 7048
The only nvidia driver I found working well are 179.44 for Win vista x64, installed without modding nv_disp.inf
the one provided from windows update for 7 (179.43 win7 i think) was not working (the screen turn white).....
View 10 Replies
View Related
Mar 19, 2009
This is a long story of various experiences ive had with dell tech support and dell technicians.
It all started when i was 3 years old, my mommy was out for dinner and i.... oh wait... wrong story lol.
okay so when i bought this xps m1530 i knew about all the GPU issues and i was OK with that,
becasue the m1530 is an amazing machine, but some months ago it started giving me green screens and high temperatures, so i figured i should talk to dell about it, and this is what happened .....
View 7 Replies
View Related
Sep 11, 2009
I’ve had my Dell studio 1555 for about 3 days now and I thought I might tell my experience I’ve had with the laptop and Dell as a company.
I was in the market for a new laptop for about 2 weeks nothing suitable had come up, looked at a few Sony’s and HP’s and nothing was in my price range, the ones I wanted were £1000+.
I never considered dell after hearing all the horror stories that people have had, however I decided to look at them with an open mind, you know the phrase never judge a book by its cover. Anyway I was considering getting a relatively small laptop that I could carry around university, but at the same time I needed something with a little power to handle all those graphic intensive applications and decided to go for the Studio 1555 (price at £800 was great value) , I chose the high end model and because it had a built in blu-ray drive I thought I might as well upgrade the screen to 1080p, I ordered and that was that.
Being the impatient person I am, after the 3rd or 4th business day it was shipped I was wondering why no one had called to arrange a delivery, so I called them and they said “we can deliver it tomorrow morning.” Was really happy, and felt like an excited kid again.
Next day delivery man came and I signed for it with a big smile on my face. I opened up the box to find a shiny laptop inside, anyway I power it on to find some bloat ware that I didn’t want or need, so I thought I would start uninstalling the programs, MacAfee trial uninstalled no problem, same goes for the office trial, however when I tried to uninstall the Data online backup software it kept on giving errors, so I said full install of vista it is then… After the vista reinstall I loaded up all the correct drivers and everything was good to go.
Playing with for a first few hours I thought it’s a fast and snappy laptop and was really happy with the product. One thing I did notice every time I powered on the laptop on the vista welcome screen had horizontal lines running through it; I thought ill address that problem a bit later.
I put a Blu-ray disc of Spiderman 3 to test out the gorgeous screen and that it where all the problems began, first of all it didn’t recognize the disc, I thought it might be a faulty disc so I pressed eject and low and behold nothing came out, I tried pressing eject on my computer and trying it from the bios all to no avail, I know there some people out there that are going to say it’s a easy fix, but I am not going to take apart the laptop after a few hours of use.
That was the final straw basically have just got off the phone with them after being passed around their telephone lines like a piece of meat and being put on hold for the best part of half an hour, lol they first said they will call me back for a cancellation , i was having none of that and i said i needed sorting out today, to give dell credit they put me straight through. The delivery man will pick up the laptop on Monday and I am going to get a full refund within the next week or so….. Sorry I know this is a bit long but I had to get this of my chest, it’s such a shame because I really did like the laptop. It’s just a case of starting the whole process of buying a new laptop. Im thinking the studio xps but dell has really put me off...
View 10 Replies
View Related
Dec 1, 2008
it came without OS as I have Vista business SP1. Second, the mics dont work at all when I first installed windows and the drivers. There was a cacle sound too each time I played audio... but all that I fixed.
It came with a 5400 rpm WD 250 GB that I took out and replaced with my Seagate 7200 200 GB.
The first time I installed the OS, all the devices in the system were okay with the drivers. With the new drive installed, I reinstalled the Os and now I have a whole bunch of Bluetooh devices without drivers and an UNKNOWN device.
What the hell could they be?
System:
Intel Core 2 Duo 2.4 GHz.
3 GB RAM.
Seagate 7200.2 200 GB.
ATI 3450.
Windows Vista Business SP1.
ViewSonic 26" V2640W.
I have NO input from the two mics that are digital near the cam. Tried everything in the audio panel. I do not want to give the thing in service for a month for a mic fault.
The thing with the drivers missing is bothering me.
My Winidows rating thing was at 4.0 when I first installed the OS on the 5400 drive.
When I redid the thing, I came down to 3.8 lowest on the video
I am attaching the system Device Manager shots.
View 10 Replies
View Related
Nov 10, 2009
I had a positive experience with Dell
1st time my Son broke his mouse button on his 1501
Called Dell, within 40 minutes he had a RMA box being sent out, he got the Day after and sent his computer in within 10 days it was back in his hands fixed 0 money out of his pocket.
2nd and 3rd I had onsite warranty service the person was prompt nice and did a great job. I was satisfied, 3 day turn around on that.
4th time I have this 1555, I used the chat yesterday morning, it was faster then calling, within 40 Minutes it was agreed the laptop needed to be fixed, my space bar had popped off twice and I noticed it looked warped, I need this laptop so I agreed to the extra cost of onsite this time, no only was it promised this week but they came today, next day and replaced the keyboard within 40 minutes this am. I thought it was worth the extra.
now fixed and totally satisfied.
Of course I know Dell can screw up but lets be honest there are times they do not and we need balance at times.
View 9 Replies
View Related
Feb 9, 2010
Does anyone have any experiences with the new nVidia drivers Dell has posted? Any comments?
View 3 Replies
View Related
Dec 8, 2009
this my first and probably last post. I just want to make you aware of my 3-4 months drama with this system and Dell "Phillipindia".
Here it goes... around 4 months ago I decided to replace my 3 year old Inspiron. I look at what dell has to offer and was immediately attracted by the look and specifications of their studio XPS 16.
So I choose one, max it up almost to the top, slide $2k and waited In about 20 days the system arrived... new, nice and shiny... first impressions where more than good... amazing screen colors, crazy performance, backlight keys, stylish design, burns bluray, amazing speakers... only downside at time what that the laptops was like a magnet for fingerprints... I remember that this little thing upset me in way at that time .....
View 10 Replies
View Related
Dec 1, 2008
I've had my Studio 1537 for over a week now, and I have two questions.
1. Do you experience sound crackling? If so, what Wifi card do you have? I have the Intel Wifi 5100 card, which does occassionally cause some crackling.
2. The headphone jack has some line noise which is present all the time. Do you have this as well?
View 9 Replies
View Related
Feb 16, 2010
Can I get folks who have the Studio 15 w/ATI post their WEI numbers? I'm concerned the Studio 15z from Best Buy is actually beating the 1558 and that disappoints me.
Processor - 6.7
RAM - 5.9
Graphics - 4.9
Gaming - 6.2
Hard disk - 5.9
View 10 Replies
View Related
