Dell Inspiron 17R 7720 :: How To Backup Partitions (PBR Image And WINRETOOLS) Using Linux
Dec 18, 2014
I own a Dell Inspiron 17R 7720 and recently my HDD crashed and I can't access the Windows 8 PRO partition anymore, so I bought a SSD to reinstall it.The problem is that my Windows is OEM and I need to backup the PBR Image and WINRETOOLS using only Linux (I can't access Windows) but I don't know how and I'm afraid to miss anything and lost my Windows Key or the diagnostics tools provided by Dell.
View 7 Replies
ADVERTISEMENT
Mar 1, 2013
I'm used to using Windows Backup to create a system image, in case I have a hard drive failure, so I can return my computer to a certain state.
I have not been able to create a system image on my 15Z with Windows Backup - it fails every time. So I purchased Acronis True Image 2013, but I don't know which partitions to back up to get the equivalent of a system image in Windows Backup.
Here is how my computer was set up by Dell:
Disk 0 : 8.00 Gb Unnamed primary partition
Disk 1 : 500 Mb ESP partition FAT32, 40 Mb DIAGS partition FAT32, 500 Mb WINRETOOLS partition NFTS, 453 C: partition NFTS, and 12 Gb PBR partiton NFTS
View 1 Replies
View Related
Dec 29, 2012
I have a Dell Inspiron 17R Special Edition Laptop with Windows 8, bought on 12/16/2012. The Dell Backup and Recovery version 1.0.0.2 does not seem to work properly when using the "Recovery Media" option (“Create a copy of your factory image in case of critical hardware failure.”) for doing a "Factory Backup" with Discs.I am using new Maxell DVD+R discs.
After the first disc is written and validated it is ejected. A new blank disc is requested, placed in the drive, and then OK is clicked, and the new disc is in for a short while and then ejected without anything being written to it. Also, the DVD is still listed in the File Explorer as "DVD RW Drive (D:) Recovery" even though no DVD is in the drive and the drive tray is in (normally, when there is no DVD in the drive the DVD drive is no longer shown in the File Explorer).
If the backup is canceled and a blank disc is placed back in, then checking the properties of the disc shows 0 GB available and 0 GB Used - this error is corrected by Restarting the computer. After the Restart the disc is properly shown to have 3.9GB Available and 0GB Used.I tried again to do the backup and the same thing happened, with only the first disc actually being written and validated. That first disc is named “Recovery” and it does contain folders: Boot, EFI, preload, and Recovery. It has files: AUTORUN.INF, BOO.MGR, BOOTMGR, BOOTMGR.EFI, MASTERLOG, and Media.ico. Used space is 3.81 GB.
Since the Dell backup program for the factory image does not seem to recognize that a new blank disc is inserted after it was done with the first disc, I cannot make a backup of the factory image.
View 7 Replies
View Related
Jan 2, 2009
Back in my Windows days and for my servers at work (just a few), I always did the following to do backup:
1) DATA
Use SyncToy or copy the data folders (My Documents, etc.) to an external hard drive
2) OS and APPLICATIONS
Create an image using Acronis's TrueImage, so I don't have to re-install the applications or re-configure the OS
With Time Machine, I know it backups my User folder (Documents, Music, etc.), but does it also backup the computer settings, such that in the case of re-install, I just pop-in the original OSX Installation CD and restore from Time Machine without reconfiguring the OS AND re-installing the application again?
I noticed in the Time Machine hard drive there is also an Applications folder that contains the list of the same applications as installed in my MBP.
View 10 Replies
View Related
Dec 10, 2014
When I go into the Control Panel and try to make system image backup on external hard drive get message saying backup failure. Have tried several times. External backup works fine for other things. How to do this?
View 3 Replies
View Related
Mar 5, 2013
We had one of our new Inspiron E6330 laptops have issues with the VGA port the other day, and in the course of the Dell technician making things worse, he messed up the hard drive. In the end, he left us with a new hard drive, a directory full of files from some unknown backup program, and the old hard drive - which he unfortunately wiped & reinstalled Windows on. He wasn't too clever. It seems that the backup program he ran left us with a directory full of files which I can't identify. I wasn't actually in the office when the Dell tech was on-site, so I'm left trying to piece this back together for my user.
The directory listing:
03/05/2013 07:04 PM <DIR>
.03/05/2013 07:04 PM <DIR>
..10/12/2012 09:39 AM
153,486 APPS.INP10/12/2012 09:39 AM
[Code] ....
The XML files are interesting - include.xml is a listing of all the user's files from the disk, and migr.xml contains a description of the old system.
View 10 Replies
View Related
Apr 15, 2013
I have a laptop in our lab that was full of a bunch of software that had been installed over the last year or so and I was trying to bring it back to how it was shipped from the factory. After booting with the F8 option then through Advanced Options I selected to restore the laptop to the factory image since there was no data that I needed from the unit. After the laptop restoration was finished I now boot to the BSOD and it perpetually asks for a startup repair which does not work. I made this unit a door stopper needless to say since there are no disks included in the purchase. Is there any way to get this laptop back to factory?
View 1 Replies
View Related
Jul 26, 2014
For creating a System Image backup the HP guide shows two selections (External Hard Drive or Disc). Can I use a USB flash drive?
View 2 Replies
View Related
Dec 19, 2014
So as soon as I got my brand new Y50-70, and before doing anything on this laptop (not even installing new software), I went tried OneKey Recovery only to discover that it is broken.
I then tried my luck with Windows Recovery (the one provided with every Windows 8.1 copy, not unique to Lenovo):
I first went through system image creation on a recovery drive (1TB WD Elements USB HDD):
1. Find it on Control Panel:
2: Select it (Recovery option):
3. Create a recovery drive:
4. Selected the F: drive (1TB, it's not a *flash* drive just an ordinary USB hdd, does it matter?):
5. Got a nice warning (indeed, this process reformatted the drive, to 32GB only, why 32GB and not the full 1TB?)
Now... let's see if I can restore from this newly created system image:
1. Rebooted from the newly created Recovery Drive (it actually boots!):
2. Selected "Use a device", then received this menu:
3. I selected EFI USB Device. It then went to an intermediate Lenovo boot splash:
4. And shortly after that (without me doing anything) a new prompt, to choose a language:
5. I selected English and then, got prompted for keyboard layout:
6. The system then system to restart again from the Recovery Drive, only to prompt me again with the "Choose an Option" screen (as in step #1). So, I selected "Troubleshoot" this time:
7. I then selected "Advanced options", and received this screen:
8. I then selected System Image Recoery and received this screen:
9. I selected the only option available (Windows 8.1), then got this "Cannot find system image":
10. Why??? I clicked cancel and I was prompted to select an image:
11. So I clicked Next, but got nothing to select:
12. Clicking the Advanced button only provides irrelevant options:
View 9 Replies
View Related
Jan 12, 2009
I have been given an Acer 6930G by a family member to setup. After realising there's 0 discs included with the laptop, the Acer pop up message tells me I have to make my own factory default image. I have successfully made it on 2 DVDs, my question is now in the manual there is nothing about how to use it, I was wondering if anyone can share any insight to me as to how it works.
Basically I know it is probably a bootable DVD as the root of the DVD suggests (several "BOOT" files) I was wondering how it actually looks like? I haven't tested it yet as the user was extremely desperate to get it running so I had to give it up the moment the DVDs were made.
If I put the DVD in and select to boot from it at start up (before getting into windows) does it take me to some sort of custom screen where I can SELECT that I want to reformat and restore the laptop? I want to know what options I am given and I can only assume that it's the same for most laptops.
And I can only assume again, that if I factory restore it, it will come back with Vista activated and all the initial bloatware again, along with all the drivers for it (so I don't need to go track them down).
This is all I need to know, I wish I can test it but I can't even get the laptop back now (until it breaks ...)
If someone can post their experiences with it I will be grateful, this is just more for reassurance than anything, and confirm my assumptions? Many thanks in advance!
EDIT: I have discovered that I can launch that recovery app by pushing ALT+F10, I have managed to wrangle the laptop temporarily to test and have discovered that I can choose from 2 back up options, but I dare not go any further, can someone tell me the next steps? One says factory default, and the other is user's backup.
I can guess that if I choose the first option, factory default, it'll ask for the DVDs I have created? And the 2nd option will restore a backup I made selecting the user option on the recovery app.
View 7 Replies
View Related
Jan 6, 2014
I'm having a problem to install windows 7 pro on my Lenovo t440s ( that came with windows 8 ) using a memory stick.I went to the windows 7 installation menu and formatted the Windows 8 partition, so now I have :
Disk 0 Partition 1: WINRE_DRV 1GB OEM
Disk 0 Partition 2 : System_DRV 260MB System
Disk 0 Partition 3 128MB MSR
Disk 0 Unnallocated Space 225GB ( it was the old windows 8 partition )
Disk 0 Partition 4: Lenovo_Recory 12.1GB OEM
However, when i try to use the free space to install the windows 7 i get this error :" Windows cannot be installed to this disk. The selected disk is of the GPT partitions style. "
I tried to bot using Legacy Boot Only and after using UEFI/Legacy Boot and nothing changed, I'm still receiving the same error.I read that I have to select each of the partitions on the drive, and select Delete. Then the drive will show a single area of unallocated space that I should use to install windows.there is any problem in delete all my partitions of Lenovo T440s? Can I delete the OEM partitions?
View 3 Replies
View Related
Sep 12, 2012
I just purchased a new Pavilion m7-1015dx Laptop and need to make the System Recovery Discs ... (which I realize restores the Laptop to factory default).. btw, I've already created the System Repair Disc.
However, I read an article about creating a System Backup Image that allows you to Recovery EVERYTHING if lost, all your installed programs, etc.
First Question ::: if I do the System Backup IMAGE ... Do I still need to create the System Recovery disc's (mfg's default) also??
The Second Question ::: If I create the System Recovery discs do I still need that Recovery Partition ??
I am really really wanting to partition my C: drive ... it's huge plus I hate seeing storage folders intermingled with system folders .. Currently using a Symbol/Character to separate them.
As of now, I can't partition the C:drive as all partitions are used.. max is 4 and I've got 4 .... C:drive, System Partition, HPTools Partition, and Recovery Partition.
View 9 Replies
View Related
Apr 13, 2013
Just got my Dell Windows 8 laptop and looking at disk management I can see 4 partitions in there in addition to the one containing the OS. See image below.
View 2 Replies
View Related
Nov 10, 2014
I own a Dell Inspiron N7110, i7 processor, 4GB of RAM with a Nvidia Geforce 525 optimus/intel integrated GPU. I need to install a Linux distro (preferrably ubuntu or debian) and dual-boot windows7. Is it possible?
View 1 Replies
View Related
Jul 6, 2009
differences are between the two.
Does the factory default., only back up the files that were originally on the drive when I first bought it, regardless of what I install afterwards? and the Custom backsup everything? I noticed that Factory Default is 10GB, but the Custom is 29GB. This is confusing because I only install two small programs on top the Factory Default. WHat is the other 19GB?
I have a Aspire 6930G that came with 3 partitions.
After I make my backup image, so I still need the recovery partitions?
View 10 Replies
View Related
Apr 25, 2014
I have a Thinkpad x130e. I completed my first backup using the Lenovo Rescue and backup application. The backup completed normally but, I still have an outstanding message in the message center telling me 'you need to perform your first backup'.
View 1 Replies
View Related
Apr 14, 2013
I bought this laptop in December and have had no problems with it. However, today I shut down and updated and then a few hours later i tried to turn it on but it does not work. When i turn it on, the screen shows the dell logo and then turns black. After a minute or so this occurs again and then an empty bar appears at the bottom with text next to it that says "F12 Boot options."
View 1 Replies
View Related
Nov 21, 2014
My laptop turn will not power up, circumstances I shut it down yesterday, packed it up, when I tried turning it on an hour later at school I couldn't get it to turn on.
Is this a hardware issue that can be repaired?
Computer: Inspiron 7720-17R, i17Rse-3589BK, Intel i7-3630QM
A. I have checked the power chord it works on my older backup Inspiron17, I two power adaptors the work. the original Dell and an after market rocket fish. both work on my older model Inspiron 17.
B. Without the power chord: open the lid, press the power button, it does not turn on the computer on or light up, none of the indicator lights do not light up.
C. When I plug the power adaptor in to laptop:
1. the power indicator light on the laptop does not light up showing it is plugged in.
2. pressing the press the power button it does not turn light up or turn the computer on, none of indicator lights do not light up.
3. (Original Dell power adaptor) the blue light at the end of the power chord goes out.
4. (Rockfish aftermarket power adaptor) the blue light on the adaptor goes from a solid blue to a blinking blue light.
View 5 Replies
View Related
Feb 11, 2013
I have a new 17R 7720 SE- that worked great when I got it, but after all the Dell updates- the Waves Maxx doesn't work, and if I use it for more than an hour the screen turns white and the Laptop screen then goes blank! I've called Dell and they told me the 17R 7720 SE runs hot because of the internal 2gb nVidia 650 Video Card.
I spent the money for a Cooler Master Laptop cooler with 3 Fans (separate A/C adapter to run this thing) and the Cooler Master sounds like a jet airplane under the Dell- and the Dell screen still shuts off. The only way to solve this is use an external monitor... if I would have known this I never would have order this worthless Inspiron.
I write this from my trusty Latitude D630- it's never let me down... the 17R 7720 SE has nothing but trouble! Dell recommended I reformat the Hard Drive, and re-install the factory software from the System Restore Disc...
View 4 Replies
View Related
Jan 7, 2013
I purchased my laptop a little over 2 weeks ago. After the first week I noticed that when I turn it on the dell logo will come on and then immediately go to a black screen. At that point I have to power off the back on and it boots normally. I flashed the BIOS to the A11 update but the didn't fix the issue.
View 10 Replies
View Related
Jan 31, 2013
Brand new Dell Inspiron 17R SE has started to switch off in a few seconds after I hit the start button. I tried going into setup using the F2 key and just doing that and exiting without saving allowed me to restart yesterday. Today, that didn't work. I had to go to Boot Options F12 and I tried randomly changing secure boot to ON and then exiting by discarding changes. That worked. I don't want to be doing this everyday.
View 1 Replies
View Related
Mar 24, 2013
I want to install a SSD in my laptop, a Dell 17 R SE 7720. I can see that the hard disk is right under the palm rest, on the left side.
I want to move the Hard Disk to the other HDD slot, and put the SSD where the HDD is now.
The question is, can i do this without voiding the warranty? Am i allowed?
Is there a list with what i can do / change to my laptop without voiding the warranty?
View 2 Replies
View Related
Dec 26, 2014
i have a problem with my precius Dell Inspiron 17R SE 7720. I have actually 2 HDD of 1TB. I want to install a mSSD into the mSATA conection. The mSSD is one SAMSUNG EVO 840 of 250GB.
My problem is... all my conections are SATA2?????? I read in this forum than Dell Inspiron 7720 are 2 SATA3 conections, because the HM77 supports only 2 ports of SATA3... but when i passed "CrystalDiskInfo", i see in all drives SATA 300 (2 hhd and 1 msata).
My laptop didn't have SATA 3 conection?
View 4 Replies
View Related
Dec 29, 2012
Dell Inspiron 7720Bios V. A07Windows 8.
Today when I booted up my laptop, it shows the Dell logo and goes to a screen that only shows me a few things. It says "Boot mode is set to:UEFI; Secure boot:ON" Then there are two categories, "UEFI BOOT: Network" and "OTHER OPTIONS: Setup, Diagnostics, Change boot mode settings" I ran the diagnostics in ePSA and it said there's something wrong with the video card. It gives error 2000-0332 - "Video memory -Video memory integrity test discrepancy"... when I searched for this code, it said the solution is "Flash latest BIOS, retry diagnostics."
View 15 Replies
View Related
Feb 25, 2013
I recently purchased an Inspiron 7720 in October 2012. A week ago, the laptop started freezing up while playing world of warcraft. I checked my Nvidia video card and there were some updates. I installed them and the computer started working normal again. On Saturday, while I was using Skype to transfer a file, the computer gave me a white screen and I had to hold down the power button to get it to shutdown. It rebooted and was working normal again. Then yesterday (Sunday), while using video chat on Skype the computer screen went into a flashing color pattern and I had to hold down the power button to get it to shutdown. Are there any diagnostic tests that I can run before calling Dell's tech department? I believe it is a video card issue but not completely sure.
View 3 Replies
View Related
Feb 13, 2013
I can't gain access to downloads for my laptop :
For example, if i go to Support / Inspiron 7720 System BIOS for WIN8/WIN7 for my 7720, I get a "Drivers & Downloads Error, an error occurred while processing your request".
View 3 Replies
View Related
Feb 7, 2013
I've been expecting a problem recently; when I turn off/restart my Inspiron 7720 and I press F2 to load the BIOS, I notice the bar fills but it continues and loads windows normally. I tried updating the BIOS from A10 to the newest A12. If i press F12 for boot options it works fine, it's only when I press F2 for the BIOS.
View 3 Replies
View Related
Feb 3, 2013
after reinstall, about 3 weeks ago when i played game i get my CPU and Mainboard to 90C. In 2 minutes, my computer shut down, i tried to start computer by power button, but it shut down in 1 sec... just flashing. After 1 minute i started computer..I upgraded BIOS, install recommended drivers also i have cooling pad which i using on HDDs.
OS: Windows 8 x64..I think it's HDD or Mainboard overheating or maybe CPU, because it has 85C too.
View 2 Replies
View Related
Jan 22, 2013
My Dell 7720 has uneven screen backlight on the edges, is it normal? Do all the 7720 dell laptops has the same issue with the screens, or it is only my problem?
Here is the video where I make screen darker and brighten: [URL] ......
View 5 Replies
View Related
Jan 23, 2013
i have encountered another bug aside from gpu boost issue, which is currently still unresolved. Fan speed control is not going idle on 7720 SE, even when temps are very low (below 40c)... on A12 BIOS, I have to restart my laptop to be able to switch to FAN Idle speed again. These are temps iam having and fans are still on.
View 2 Replies
View Related
