When I go into the Control Panel and try to make system image backup on external hard drive get message saying backup failure. Have tried several times. External backup works fine for other things. How to do this?
View 3 RepliesFor creating a System Image backup the HP guide shows two selections (External Hard Drive or Disc). Can I use a USB flash drive?
View 2 Replies View RelatedI have been given an Acer 6930G by a family member to setup. After realising there's 0 discs included with the laptop, the Acer pop up message tells me I have to make my own factory default image. I have successfully made it on 2 DVDs, my question is now in the manual there is nothing about how to use it, I was wondering if anyone can share any insight to me as to how it works.
Basically I know it is probably a bootable DVD as the root of the DVD suggests (several "BOOT" files) I was wondering how it actually looks like? I haven't tested it yet as the user was extremely desperate to get it running so I had to give it up the moment the DVDs were made.
If I put the DVD in and select to boot from it at start up (before getting into windows) does it take me to some sort of custom screen where I can SELECT that I want to reformat and restore the laptop? I want to know what options I am given and I can only assume that it's the same for most laptops.
And I can only assume again, that if I factory restore it, it will come back with Vista activated and all the initial bloatware again, along with all the drivers for it (so I don't need to go track them down).
This is all I need to know, I wish I can test it but I can't even get the laptop back now (until it breaks ...)
If someone can post their experiences with it I will be grateful, this is just more for reassurance than anything, and confirm my assumptions? Many thanks in advance!
EDIT: I have discovered that I can launch that recovery app by pushing ALT+F10, I have managed to wrangle the laptop temporarily to test and have discovered that I can choose from 2 back up options, but I dare not go any further, can someone tell me the next steps? One says factory default, and the other is user's backup.
I can guess that if I choose the first option, factory default, it'll ask for the DVDs I have created? And the 2nd option will restore a backup I made selecting the user option on the recovery app.
I just purchased a new Pavilion m7-1015dx Laptop and need to make the System Recovery Discs ... (which I realize restores the Laptop to factory default).. btw, I've already created the System Repair Disc.
However, I read an article about creating a System Backup Image that allows you to Recovery EVERYTHING if lost, all your installed programs, etc.
First Question ::: if I do the System Backup IMAGE ... Do I still need to create the System Recovery disc's (mfg's default) also??
The Second Question ::: If I create the System Recovery discs do I still need that Recovery Partition ??
I am really really wanting to partition my C: drive ... it's huge plus I hate seeing storage folders intermingled with system folders .. Currently using a Symbol/Character to separate them.
As of now, I can't partition the C:drive as all partitions are used.. max is 4 and I've got 4 .... C:drive, System Partition, HPTools Partition, and Recovery Partition.
So as soon as I got my brand new Y50-70, and before doing anything on this laptop (not even installing new software), I went tried OneKey Recovery only to discover that it is broken.
I then tried my luck with Windows Recovery (the one provided with every Windows 8.1 copy, not unique to Lenovo):
I first went through system image creation on a recovery drive (1TB WD Elements USB HDD):
1. Find it on Control Panel:
2: Select it (Recovery option):
3. Create a recovery drive:
4. Selected the F: drive (1TB, it's not a *flash* drive just an ordinary USB hdd, does it matter?):
5. Got a nice warning (indeed, this process reformatted the drive, to 32GB only, why 32GB and not the full 1TB?)
Now... let's see if I can restore from this newly created system image:
1. Rebooted from the newly created Recovery Drive (it actually boots!):
2. Selected "Use a device", then received this menu:
3. I selected EFI USB Device. It then went to an intermediate Lenovo boot splash:
4. And shortly after that (without me doing anything) a new prompt, to choose a language:
5. I selected English and then, got prompted for keyboard layout:
6. The system then system to restart again from the Recovery Drive, only to prompt me again with the "Choose an Option" screen (as in step #1). So, I selected "Troubleshoot" this time:
7. I then selected "Advanced options", and received this screen:
8. I then selected System Image Recoery and received this screen:
9. I selected the only option available (Windows 8.1), then got this "Cannot find system image":
10. Why??? I clicked cancel and I was prompted to select an image:
11. So I clicked Next, but got nothing to select:
12. Clicking the Advanced button only provides irrelevant options:
I have a Dell Inspiron 17R Special Edition Laptop with Windows 8, bought on 12/16/2012. The Dell Backup and Recovery version 1.0.0.2 does not seem to work properly when using the "Recovery Media" option (“Create a copy of your factory image in case of critical hardware failure.”) for doing a "Factory Backup" with Discs.I am using new Maxell DVD+R discs.
After the first disc is written and validated it is ejected. A new blank disc is requested, placed in the drive, and then OK is clicked, and the new disc is in for a short while and then ejected without anything being written to it. Also, the DVD is still listed in the File Explorer as "DVD RW Drive (D:) Recovery" even though no DVD is in the drive and the drive tray is in (normally, when there is no DVD in the drive the DVD drive is no longer shown in the File Explorer).
If the backup is canceled and a blank disc is placed back in, then checking the properties of the disc shows 0 GB available and 0 GB Used - this error is corrected by Restarting the computer. After the Restart the disc is properly shown to have 3.9GB Available and 0GB Used.I tried again to do the backup and the same thing happened, with only the first disc actually being written and validated. That first disc is named “Recovery” and it does contain folders: Boot, EFI, preload, and Recovery. It has files: AUTORUN.INF, BOO.MGR, BOOTMGR, BOOTMGR.EFI, MASTERLOG, and Media.ico. Used space is 3.81 GB.
Since the Dell backup program for the factory image does not seem to recognize that a new blank disc is inserted after it was done with the first disc, I cannot make a backup of the factory image.
Back in my Windows days and for my servers at work (just a few), I always did the following to do backup:
1) DATA
Use SyncToy or copy the data folders (My Documents, etc.) to an external hard drive
2) OS and APPLICATIONS
Create an image using Acronis's TrueImage, so I don't have to re-install the applications or re-configure the OS
With Time Machine, I know it backups my User folder (Documents, Music, etc.), but does it also backup the computer settings, such that in the case of re-install, I just pop-in the original OSX Installation CD and restore from Time Machine without reconfiguring the OS AND re-installing the application again?
I noticed in the Time Machine hard drive there is also an Applications folder that contains the list of the same applications as installed in my MBP.
I own a Dell Inspiron 17R 7720 and recently my HDD crashed and I can't access the Windows 8 PRO partition anymore, so I bought a SSD to reinstall it.The problem is that my Windows is OEM and I need to backup the PBR Image and WINRETOOLS using only Linux (I can't access Windows) but I don't know how and I'm afraid to miss anything and lost my Windows Key or the diagnostics tools provided by Dell.
View 7 Replies View RelatedWe had one of our new Inspiron E6330 laptops have issues with the VGA port the other day, and in the course of the Dell technician making things worse, he messed up the hard drive. In the end, he left us with a new hard drive, a directory full of files from some unknown backup program, and the old hard drive - which he unfortunately wiped & reinstalled Windows on. He wasn't too clever. It seems that the backup program he ran left us with a directory full of files which I can't identify. I wasn't actually in the office when the Dell tech was on-site, so I'm left trying to piece this back together for my user.
The directory listing:
03/05/2013 07:04 PM <DIR>
.03/05/2013 07:04 PM <DIR>
..10/12/2012 09:39 AM
153,486 APPS.INP10/12/2012 09:39 AM
[Code] ....
The XML files are interesting - include.xml is a listing of all the user's files from the disk, and migr.xml contains a description of the old system.
I have a laptop in our lab that was full of a bunch of software that had been installed over the last year or so and I was trying to bring it back to how it was shipped from the factory. After booting with the F8 option then through Advanced Options I selected to restore the laptop to the factory image since there was no data that I needed from the unit. After the laptop restoration was finished I now boot to the BSOD and it perpetually asks for a startup repair which does not work. I made this unit a door stopper needless to say since there are no disks included in the purchase. Is there any way to get this laptop back to factory?
View 1 Replies View RelatedI'm used to using Windows Backup to create a system image, in case I have a hard drive failure, so I can return my computer to a certain state.
I have not been able to create a system image on my 15Z with Windows Backup - it fails every time. So I purchased Acronis True Image 2013, but I don't know which partitions to back up to get the equivalent of a system image in Windows Backup.
Here is how my computer was set up by Dell:
Disk 0 : 8.00 Gb Unnamed primary partition
Disk 1 : 500 Mb ESP partition FAT32, 40 Mb DIAGS partition FAT32, 500 Mb WINRETOOLS partition NFTS, 453 C: partition NFTS, and 12 Gb PBR partiton NFTS
While attempting a recovery with a copy of the recovery partition as provided by Lenovo, I receive: "Windows cannot find a system image on this computer".
I have both the Lenovo recovery partition on the HDD that came inside the laptop (15.56GB, PBR_DRV) and a copy of it on an external USB HDD (booted from it!). Why can't the recovery software find it?
Where is that "System Image"?
I just opened my new Inspiron 15 (5545, Mid-2014), and the touchpad occasionally double clicks. When I press the lower left corner, I sometimes get a single click (which is what I'm expecting), but I also sometimes get a double click. If I simply tap the touchpad once, I can get a single click, but I should be able to use the left-click button.
I've checked the Dell Touchpad settings, and I verified that the left button is set to "Click" and not "Double click". I ran the Dell Touchpad test in My Dell, but all it was checking for was whether or not the buttons and touch surface were responsive. It didn't seem to indicate whether the press was a double click or a single click.
How do I run a program from an ISO, as opposed to having to put the disk into my Macbook Pro?
View 8 Replies View RelatedA friend of mine is considering an HP DV6t laptop. He needs to know if he should spend the $19 for the OS disk or not. Can he make his own system restore disk when he gets the laptop? Is there a difference between the disk they provide or the one you mak in the backup (if available)?
View 6 Replies View RelatedHP pavilion model -17-e054ca
After upgrade to Window 8.1 PRO I seeC: 932 GBD: 28 GB -listed as recovery. I want to save system image backup Currently to create system image backup I have only option to create image on external drive or on D:
1. Is possible without reinstalling windows create new partion E: in order backup system images to it? If yes how create new partition in win.8.1?
2. if partion E: will contain system image(s) can I boot from usb recovery disk and choose restore from one of system images located on E:
3. If for some reasons I want to reinstall OS from set of recovery DVD(s) to factory setting what is going to happen with partion E:
4. what is purpuse of D: marked as recovery?
During One Key Recovery there is an option for user specified backup , but I don't know how to make a .wsi file ?
View 1 Replies View RelatedI just purchased an Inspiron 14R for my granddaughter (graduation present). I know Dell doesn't ship OS Recovery disks anymore (poor decision), but I thought I'd be able to create one from the Dell Backup and Recovery app.
However, all I see is the "System Recovery" option, which doesn't work. It fails after the first DVD. I don't have a flash drive to try that option yet.
But I don't really want 4 DVDs of a full system backup; I just want a Windows 8 OS Recovery DVD. The manual seems to say I have one opportunity to make one, but I've never seen that option.
There must be a way to get or make a simple Windows 8 OS backup--why is this so difficult?
Recently having several issues, unable to make new folders, but now my fnc key that turns the sound off doesn't turn the sound off anymore.
View 7 Replies View RelatedI have a hp envy m7j010dx with windows 8.1. it came preinstalled (windows 8) on a 1 tb hdd. I recently purchased a samsung 840 pro 250 gb ssd that i wouold like to make the system drive and make the original drive my data drive. confused on how to do so. want it fresh not clone. all i can find is restore or backup stuff. i just want to put the original computer on the new drive.
View 5 Replies View RelatedI Purchased this laptop, (Inspiron 3521) through ebay.in and after 3 months I found that it has no factory installed image in it (but mentioned during purchase). I still have warranty till march 2015. Can I be able to replace the faulty disc with new one win8 installed.
View 13 Replies View RelatedDell Insprion 1545
I recently did a factory image restore on my Dell laptop because I couldn't seem to get rid of a virus on my computer. The factory image restore was completed successfully but now windows will not start up. Startup repair says
"cannot repair this computer automatically-
Problem event name- startup repair offline
Problem signature 01: 6.1.7600.163.85
Problem signature 02: 6.1.7600.163.85
Problem signature 03: unkown
Problem signature 04: 21200839
Problem signature 05: Autofailover
Problem signature 06: 3
Problem signature 07:Failure during setup
OS version: 6.1.7600.2.0.0.256.1
Locale ID: 1033"
I performed regular diagnostics on the computer and all tests were passed. I also did a custom diagnostics test on the hard drive and all tests were passed, except for the last test it said "there is no flash drive in the card reader". Which I believe is probably normal?
My computer only came with two disks from the store. One titled 'Drivers and utilities-for reinstalling dell insipron laptop computer software', and the other titled 'Application- for reinstalling cyberlink powerDVD DX 8.3 software for windows 7'. I do not have a cd for windows 7.
If I create a backup, Is the OS backed up?
Or It justs backs up the files that I've installed and my documents and stuff?
I have a Acer Aspire 2920, and I'd like to back up my Vista Home Premium incase that I need it back because I want to install Ubuntu 9.10 on it.
Ubuntu is great for documents and internet since I dont want anything else in the way like viruses and malware or other bugs and worms.
And yes, my Vista Home Premium is LICENSED.
So, What do I need to do to back up my OS?
My battery died a few months ago on my nc8430. It's not an oem batter, but was a third the price. When running on the battery power, the computer is very slow. I have to have NHC on MAX Performance to watch youtube @ low res, or even type without lag. Even with this there is lag on the system. With NHC set to Max Battery, the computer is nearly unusable. Now I've been using the computer for a while, at Max Battery, and AC power, with now problems. And if i plug in the power cable, but change nothing, the system runs at normal speed.
Can a battery cause this type of behavior? Should I return it?
I have the latest drivers, freshly installed, but when I scan again the system, it says I need to install these (see image). I download them, I install, I reboot... and still uninstalled.
And I won't be happy with something like "don't worry, if your system is working, just ignore them". Because if that is the case, then for sure I can expect more things not taken care of, from Dell.
After doing a system backup the intel wireless n7260 disappeared. I reinstalled it under device managers action and the driver got installed as (2) and not working, meaning the driver 1 must be actually there but is not visible and also not working. I therefore cant get an internet connection or see any available wireless networks. How to get this driver working again?
View 9 Replies View RelatedI recently created an image of a hp elitebook 6930p and cloned it to another when I noticed that the wifi doesn't work (although it was working some point before I starting imaging). If I use an ethernet connection, internet works fine.
I'm running windows 7 64 bit enterprise on them.
I have quite a few of these and I installed a fresh windows os on one and there's no problem with the wifi.
I tried looking online for a solution and two came up:vtouch the wifi quick panel "button": while the information, volume quick buttons work, the wifi doesn'treset to default settings in the bios: unfortunately, these laptops were donated to us and there's a password on the bios. I tried entering nothing. I'm afraid to push it anymore in case there's an anti-theft measure on too many failed passwords vWhat else can I do to fix this issue?
I have previously done a system image of to T500 OS and everything. The T500 is on it's last leg. I received a T540P as a replacement but I want to migrate the T500 system Image to be restored on my T540P.
I know it's doable because I have done it BUT the problem is, I think the downloads. It seems when I go to update software after the image is done the T540P downloads. (the Lenovo PM, Graphics and Display drivers) when the reboot happens I get to the Startng Windows screen and the 4 bubbles coming together and then pulses. But it always says there. It at least, I stopped it after like a 30 minutes.
When I try to make recovery by one key recovery I get this message (current system can not support back up)
I have lenovo G580 (20150), windows 8 .
And use One key recovery version 8.0.0.1519
Link to picture
I have a dell laptop computer (Inspiron 13 (7347, Mid 2014)). I tried to restore the win8 to a point but it failed. Now it can not start windows 8. "Your PC ran into a problem and needs to restart. We are just collecting some error info, and then we will restart for you". My computer was restarted again and again but the problem is still exist. I think I need run windows 8 system restore but I do not know how to do it...
View 2 Replies View Related