I just reformatted my Latitude XT with Windows 7 and it won't automatically go into hibernation as per my power settings.
I have it configured so that it will first go into sleep mode after being idle or closing the lid and then go into..............................
My new Lattitude laptop powers back on (sort of) when in either sleep or hibernate modes, but I have to power off in order to get the computer to start. Usually happens after a few hours of being in either mode. Does it have something to do with power management?
View 1 Replies View RelatedI was using my laptop the other day and it froze up. Then it shut down by itself. When I tried booting it back up, it says "No bootable devices found" and gives me the options to press F1, F2 or F5 for retrying, setup utility and diagnostics. I ran the diagnostics and it says "All tests passed". The SSD also seems to be recognized as it shows it in the "configuration" tab in diagnostics. I have also tried taking the msata SSD from the 2.5" bay and moving it to the msata slot. Rebooted but shows the same thing. Is this a known issue and is there a fix for this?
View 9 Replies View RelatedI have a Dell Latitude E7240. My issue is that when it is connected to the D/Dock station, the rear USB ports are automatically disabled.
Is there a way to have them enabled while docked?
E6400
Windows 7 x64 RTM from TechNet
Latest BIOS, DCP drivers, etc
Not sure if anyone else is running into this but I will put my computer into hibernate by closing the lid and toss it in my bag. Works for about 5-7 hibernates and then sometimes it will look like it is hibernating, but the machine never turns off. I open the lid and see that the keyboard backlight is on and the num lock or caps lock will go on and off, but I can't get the screen back. I can only hold down the power button for 5 seconds and then restart.
Im using windows 8 on my Dell 5520 laptop. now a problem is happening from past few days i could'n hibernate my Laptop, when ever i do it, sometimes it shutdown my system and sometimes it restarted to login screen.
View 1 Replies View RelatedI click hibernate...the screen goes black and if i wiggle the mouse it comes back as the login screen instantaneously. How can i get hibernate to do what its supposed to?
View 9 Replies View RelatedI have installed Windows 8.1 on my R61 and have a problem with sleep/hibernate. It never goes to this state, iI should stead LCD switch off but computer still runs. The only way to get back is switch off power and restart.
If I manually disable wireless driver before pressing sleep, then it goes to sleep state successfully. Which driver i should use.
I purchased my new Lenovo G580 less than 1 year ago and over this time it has got slower and slower and seems to picked up a number of viruses. I am no expert so took it into our IT guy at work and he has reccomended a factory reset.
I dont think i received a disc with my laptop, how i should go about completing a factory reset and if windows will be automatically installed.
Every time I start my laptop the bios beeps once and doesnt load windows automatically. I reinstalled windows 8.1 and installed all required drivers. I recently updated my bios to the latest one F.50
After doing uefi diagnostics I found this error:
2014-11-04 18:14:37 Starting VideoDiags.udm version 1.03 built Sep 10 2014 13:54:422014-11-04 18:14:37 VideoDiags.UDM init complete2014-11-04 18:14:46 Video Palette Check Completed - Result 32014-11-04 18:14:46 Error Code=0xC092014-11-04 18:14:46 2014-11-04 18:14:47 Warranty Start Date : 04/15/20142014-11-04 18:14:47 WarrantyID String size = 602014-11-04 18:14:47 Warranty ID = 9G82M1-73979L-QFPJXG-Q2C5032014-11-04 18:14:51 Video Palette Check Completed2014-11-04 18:14:54 EFI HP BIOS Management Started
Does the Microsoft Window's 7 installation CD automatically recognize the mSATA and the Optimus in conjunction with the Intel HD 4000 as well as the fingerprint reader for login? Or do I have to download the drivers and install ExpressCache separately off of Lenovo's website... trying to stay clear of Lenovo drivers that might conflict with Intel's and NVIDIA's.
View 6 Replies View RelatedMy x220 is driving me crazy these days. Some days ago I experienced very strange behavior of my system. I was just using the notebook as always as it started to stutter.
With stuttering I mean everything is working for 1-2 seconds then is stuck for 1-2 seconds, working, stuck, working so on so forth.
With everything I mean the mouse movement, hard disk load, graphics movement, audio, everything simultaneously. This problem does show up not only if Windows is up but also when Windows is booting or if I start a live linux distribution.
I also noticed that sometimes when I'm moving around the ultranav trackpoint the cursor jumps to one display edge and opens a context window as if I had pressed the right mouse button.
What I did so far:
Reboot my system several times.
Checked Task-Manager: nothing out of the ordinary
Reset BIOS to factory settings
Updated everything to newest stuff
Started a live Linux distribution instead of Windows 7
Decrypted my system (TrueCrypt)
Deactivated Power Management/SpeedStep via BIOS settings
Switched to Single-Core processing via BIOS settings
Swapping RAM from 2x8GB CORSAIR to 2x4GB KINGSTON
Swapped SSD with original HDD
Try booting windows in safe mode
I'm almost at a point to say this can't be a software issue and that it is something mainboard/CPU/GPU related, but I want to be certain before contacting the support.
Another thing I noticed: The stuttering starts exactly when the windows logo shows up and the screen automatically dimmes itself while starting windows. Something is happening in that moment. I may need to add that I did not install anything prior to the current situation. That does support the hardware relation.
Lenovo X220 (Model: 4290-G51) | Intel Core i7 2460M | Intel HD 3000 | 2 x 8 GB CORSAIR DDR3-1333 RAM | 256GB SAMSUNG 840 Basic SSD | 9-Cell orig. Lenovo Battery 29++ (FRU: 42T4942, LGC) | BIOS V1.29 | Power Manager V6.65.1 | Power Management Driver V1.67.04.05 | Windows 7 Professional 64Bit (up-to-date)
i have a studio 15 just wondering what you guys prefer hibernate or sleep mode?
i find hibernate a cool future and useing it alot..
First of all i want to say i have a dell xps 1530, Vista.
Recentrly ive reinstalled vista and now i have something strange going on.
When i got to start (i dont use button) and click on hibernate, notebook save data and when he is about to shut down, it just starts all over, the data doesnt go loss, so it starts the same as i did leave it in hibernate.
The strange thing is that, when i after this try to shut down it restarts again, so the only thing left to do for me to push the button so it just manualy shuts down.
One more thing, when i start again, and i direcly try to hibernate or shut down then it does his job, everything happens as it should be.
It seems that randomly, after awaking from hibernation, my touchpad becomes unresponsive and my keyboard speed settings are reset. This is typically solved by restarting the computer.
View 7 Replies View RelatedI have fresh install of WinXP. When I click Star->Turn off, i only get 3 options: Standby, Turn off, Restart.
On the keyboard, there is only Standby button (F1), I dont see hibernate anywhere?!!
I put my Inspiron 9300 into hibernate this morning, tried to wake it back up and all I'm getting aftet the Dell logo and status bar (POST) is a black screen with a blinking cursor in the left corner.
When I hit the Play button on the front of the notebook, it brings up the Dell Media Direct logo screen, but nothing happens.
When I boot with my XP CD and go to the recovery console, I can see the hard drive and files, though I can't access most folders because I get an Access Denied message.
I tried booting from my flash drive, but when I do, the flash drive is recognized as the c: drive and the hard drive isn't listed.
I also tried unplugging my laptop and battery and held down the power button for a few minutes to discharge any electricity. No luck.
I just got my new M6400 and I cannot get it to goto standby or hibernate. I get the "Preparing to standby..." dialog and it just hangs there.
BIOS A03
NVIDIA 2700M 6.14.11.7653
XP Pro SP3 .....
I was trying to update my drivers, I went to dell website and got a few update for my drivers, but now, my computer won't go into standby or hibernate. If I try to go into standby, after I see the "preparing to standby" my computer goes black and the on light still on, then I can't wake the system up I have to press and hold the power button and reestart. When I try to go into hibernate mode after "preparing to hibernate" I see a blue screen with that says something like "an error has happened and windows has been shut down to prevent damage to my system, the problem could be caused by a new software or driver... etc" After I restart it says, your system has recovered from a serious problem and then it ask me to send a report error, I do and then my web browser and open this: [url]I know the problem was a driver that I was trying to update to make my computer work better but instead it messed up. How do I undo the updated drivers?
View 9 Replies View RelatedFor some reason, my laptop's internet stops working after it enters sleep or hibernate mode. I have to restart my computer to get the internet working which is annoying.
View 5 Replies View RelatedHibernate take a really long time to shut down, twice as long as shut down. the first thing that happens is that the monitor shuts off and then hard drive works for a while
Sleep is even clunkier. turns off monitor, it takes a few minutes to complete, sometimes when i use the FN+F1 combo it comes back on, when I close the lid usually works, but sometimes it doesn't.
at times hibernate won't work and stops in the middle of it, forcing me to shut of the laptop. then on restart it freezes a couple of times on the desktop and earlier I even got the BSOD.
My laptop has frozen while in hibernate mode on two occassions in the past two months. Though not a frequent occurance it is heart stopping when you have committed work to a customer and everything you need is on the laptop and not accessible.
The first time the machine was off. Opened the lid and pressed the power button and nothing - did not even light up the button. After no responses to any attempt to start the computer I removed the battery. Upon reinserting the battery the machine started working and everything was fine.
The second time the machine was off but left with the lid open. The power button was lit. No matter what I did there was no response - frozen again. Once again I removed the battery and upon reinserting the system again resumed working normally.
The only common thing is the laptop went into hibernate mode and would not respond to commands to wake up.
I have 10+ years experience, but I cant resolve this bug. I have a 3560 Vostro, new running win7. It has never went to sleep or hibernate properly. I have set it to go to sleep after 10 minutes and hibernate after 120 minutes, neither work as I wake up the next morning to find the laptop still running. ALSO I set the power button to "hibernate" and when pressing that it takes me to the log into windows screen. It seems like the computer goes to hibernate and IMMEDIATELY wakes up to the login screen.
Is there a program or setting that is preventing the PC from sleep/hibernation?
My new 600m is not responsible after hibernation. I can do nothing except holding the power switch for 7 sec to shut it off and restart it again. What configuration need to be looked at (I presume this is not as usual), I am new to laptops
View 1 Replies View RelatedI'm running Vista 64, ad very occasionally when I try to hibernate the machine (either docked or un-docked) it waits for 5+ minutes with a black screen and then reboots.
View 3 Replies View RelatedThe computer will go into hibernation without any problems.
When I power the computer back up, it starts up I see the starting windows screen. That screen goes blank and then nothing happens.
I just updated the BIOS to A15 and that did not work. I have tried uninstalling the video driver and that did not work. I tried installing an older video driver and no luck there.
The video driver I have for the NVIDIA Quadro FX 1800M show version 8.17.12.5922
I own a Dell XPS L502x. For the past couple of months, if I reboot or close the laptop lid, the touchpad is automatically disabled and I have to enable it to use it again. It never used to do this. Is there a way to shut off or 'disable' this automatic disabling action?
View 5 Replies View RelatedXPS 13.... I am using an Apple Time Capsule/Airport as router, but it happens with all wi-fi connections. I have not changed any settings, and the network is saved and set to auto-connect. It does not though. I have to manually select and click connect, then it eventually does.
View 3 Replies View RelatedI have Dell Inspiron N5010 laptop, It is shutting down automatically when i start my laptop.
View 6 Replies View RelatedMy dell Inspiron N4030 turns off automatically without any warning message and without system shut-down message after some random amount of time. Whenever I turn on the laptop it will work about 10 minutes and then turns off "boom!" and as I restart will work for 7-8 minutes and again turns off. If I keep on restarting it again and again without giving it rest then the working time keeps on decreasing...
View 14 Replies View Related