I have a Dell Latitude E7240. My issue is that when it is connected to the D/Dock station, the rear USB ports are automatically disabled.
Is there a way to have them enabled while docked?
The USB ports on my new E Port II docking are not working with my new Latitude E7240 Laptop. Full configuration of the laptop is below. Talked with Dell and they sent me a replacement docking station but the same issue surfaced. Looked at the Device Manager and no extra USB ports show up when connected to the docking station. The side laptop USB works fine when the docking station is connected.
Computer Model Latitude E7240
Shipping Date 11/16/2013
[Code] .....
I have just gotten an E7240 computer and have noticed that the USB ports on the back of my computer are disabled when the computer is docked which is a very unfortunate feature of this new computer model. It seems there are many people posting complaints about this feature on the internet. It basically takes a computer that has 3 USB ports and makes two of them rather useless. It is very useful if a USB receiver for keyboard and mouse can be plugged in to the back of the computer so that the mouse can be used easily when docked, but also when the computer is taken off the dock to go to a meeting room. This then leaves the side USB port available for devices such as wireless projectors when in the meeting room. Although this computer was designed to behave this way, I think that most users would agree that this is a critical issue that needs to be seriously considered and fixed by Dell as soon as possible assuming that there is not already a work around available.
View 1 Replies View RelatedI have 2 new E7420 laptops that are replacing some older ones.
When I dock either of them, all I get is a flashing cursor on either the external screens, or the laptop screen. I get the Dell logo, then just a flashing cursor on the top left of the screen.
I can turn the laptop on, wait for it to boot, then dock it, but of the 3 times I've tried that, the USB didnt work once.
Have just upgraded to the latest BIOS, but it didnt change anything.
Is there some BIOS setting or something I need to change?
Does the Latitude E7240 can support two external displays without a dock? Can have one plugged in to the mini displayport and one in to HDMI and output just to these displays?
Or is it limited to just the laptop display and one single external display?
My Latitude e7240 when docked onto the PR03X docking station, the power adapter that is plugged into the PR03X completely goes dead. The only way I can reset the power is by unplugging and replugging the AC adapter FROM THE WALL. Tried the spacer. Tried double powering (1 adapter into the PR03X and another adapter into the e7240). Also tried plugging the laptop on first without power, and when powering up the laptop, it would boot up 10x slower than normal and sometimes hang. Also tried multiple other PR03X just to be sure the one i have is not faulty. The same problem is repeatable. The laptop has the latest BIOS.
It seems there is a power mismatch of some sort that would cause a) the adapter to fail, and then b) for the laptop to run extremely slow because of what?Is the problem caused by a faulty docking port on the e7240? I assume the PR03X is compatible to the e7240??
Just started using brand new Latitude E7240 and connected to E-port docking station. When booting an error pops up as below: The battery currently attached to the system will not supply enough power to dock for it to function. Please attach AC power to the dock for it to function normally
F1 - continue
F2- change setup options
The Laptop and the dock stations are brand new. This is only happening with the 7240's.
We are running more than200 dell computers in our company. lately we purchased E7240 for some users but it looks like the AC adapter does not work with the Dell E-Port docking station we have and that cause the USB hubs not to function at all.
Currently the workaround is to plug the AC adapter to the laptop instead of the docking station.
Our BIOS is updated to the latest version. also a message comes up when the ac adapter connected to the docking station before the windows boot up saying the ac adapter won't charge.....
I have a Dell Latitude E6430 laptop running windows 7 64-bit. When I try to use it with a docking station, the USB ports on the docking station do not work. When I try to use a USB mouse with it, it only works with one of the USB ports. When I try using my printer (HP laserjet 1320) through the USB ports, it doesn't work (it did previously with a Dell latitude E6430 running windows 7 64-bit).
I've installed the latest BIOS upgrade, updated the USB and intel chipset drivers. How do I get these working?
I own a Dell XPS L502x. For the past couple of months, if I reboot or close the laptop lid, the touchpad is automatically disabled and I have to enable it to use it again. It never used to do this. Is there a way to shut off or 'disable' this automatic disabling action?
View 5 Replies View RelatedI just got my new M6800 laptop- put it in the docking station and everything seems to work except for the USB's on the docking station.
I have had to plug my peripherals into my laptop. This is by design for the docking station. Why do I have a docking station? So that I can have an external keyboard and other peripherals permanently connected when I am in my office.
Went in device manager and searched for USB driver updates and mine are apparently up to date.
No trying a dell support chat window- let's see how long this takes....
How can I configure Bitlocker in X1 Carbon using Win8.1 so that the laptop won't ask the freaking Bitlocker Recovery Key every time when I boot the laptop IN the OneLink Pro Dock station AFTER I've used the machine WITHOUT the docking station (or vice versa)?
Bitlocker works OK if I boot the laptop every time in same mode (using always docking station OR not using it ever). However, I need to use the laptop in both modes; with the docking station (at work) and without it (at home and when travelling). And I'm not wanting to type the looooooooong Bitlocker Recovery Key every time when I boot the laptop in different mode.
How can I tell for the Bitlocker that both these modes are trusted ones?
XPS 13.... I am using an Apple Time Capsule/Airport as router, but it happens with all wi-fi connections. I have not changed any settings, and the network is saved and set to auto-connect. It does not though. I have to manually select and click connect, then it eventually does.
View 3 Replies View RelatedI have a T540p laptop with Windows 7 installed on it, and when I insert it in the docking Station (Ultra Dock 90w) the USB ports don't work.
I tried with another laptop setup with Windows 8.1 and everything works fine. I also tried with another docking stsation, I have the same issue. I suspect something wrong with Windows 7.
All drivers are properly installed as the computer is new. I also performed the docking Firmware update from this page [URL] ... but this didn't work.
I have a TravelMate TMP645-MG connected to ProDock II. The problem is that the USB ports on docking staion are not working, I can see the following yellow exclamation mark in device manager when the docking station is connected (no errors when not docked).
Windows 8.1 Enterprise, 64bit. All latest drivers from Acer homepage are installed.
I have a ThinkPad X240 laptop with Windows 8.1 Enterprise x64 installed. Sound plays just fine from the laptop's speakers, and when I plug external speakers into the laptop's 3.5mm audio port they work just fine too. when the laptop is docked in my Ultra Dock 90W docking station and the external speakers cable is plugged into the dock's audio port, no sound is heard. If I'm playing music through the laptop's speakers, as soon as I plug a cable into the dock's audio port no sound is heard. I can still use the laptop's audio port to connect external speakers, but that defeats the object of having an audio port on the Ultra Dock.
The Ultra Dock has (I believe) the latest firmware installed (version 2.22.000) and I have the latest audio drivers installed: in Device Manager > Sound, video and game controllers > Realtek High Definition Audio > Driver version is 6.0.1.7188 which is the latest available from Lenovo Support downloads. What do I need to do to get the Ultra Dock's audio port working? I mistakenly posted this message on the "X Series tablet ThinkPad Laptops" board.
I am running a IBM Thinkpad W540 with a Lenovo Ultra Dock Docking Station 170 (Model 40A20170US). I have 3 Asus 23.6" LED HD Monitors (Model VN247HP). These monitors have a standard VGA connection and 2 HDMI ports, By default you are provided a VGA cable and a HDMI-DVI cable. When I plug these monitors into the Ultra Dock no signal is found(including the VGA).
When I plug into the direct VGA port on the laptop, the monitor gets signal. If I use a Mini-DP connection with a Mini-DP-DVI adapter I get signal just fine. If I plug my this monitor into my desktop under HDMI and DVI connections it works just fine.
I have gone into the bios and confirmed that under display the "Video Mode on Dock" is set to Advanced(I tried standard and it did not work any better). I have the latest video drivers for the Intel HD graphics driver (10.18.10.3412) and the NVIDIA Quadro K1100M (9.18.13.4052). The USB ports work just fine, as does the power cable for the docking station. I tried applying the latest firmware update but the program runs and nothing happens. I checked for any other drivers that might have resolve the issue but have not had any luck.
How to set up so that tap with two fingers on the touchpad will preform like the middle button on a mouse. Can find that setting in the dell touchpad program. I am on a dell latitude e7240
View 1 Replies View RelatedI will walk away from my laptop dell E7240 for 5 minutes and it will go back to log in page. How do I change that setting. Also after a time it seems to go to sleep and knocks me off VPN connection during a web presentation if I do not interact with mouse during web conf. I have to use ctl alt del to log back in but then my VPN is gone. How do I extend the time the laptop stays active?
View 1 Replies View RelatedA company bought laptop with model : E7240 & E7440, So those laptops come with Windows 8 product-key store on mainboard. I would like to get that number because those laptops werer installed Wiindows 7 from our Global IT but right now those laptops are transfering to new owner and Global license of Win7 is end. Is possible to get product-key from each laptop for downgraded the license to Win7 without re-install the OS ?
View 2 Replies View RelatedWe have bought a bunch of Latitudes E7240 and deployed them with the new Dell Data Protection | Security Tools (DDP|ST).Now we have discovered that if you attempt to login with the wrong credentials the device (HDD) will be locked.This is expected as it is one of the purpose of having Disk encryption enabled BUT if a user accidentally lock the HDD by typing wrong credentials you would expect to be able to UNLOCK it with the admin password. (You create one when first enabling DDP|ST)
So, the user forgot he's credentials and the screen only shows "The device is locked, contact your administrator" and with NO OPTIONS what so ever! How do I, as the administrator unlock the HDD? Where do I type the admin password?
Original Win 8 Pro, then updated to 8.1 Pro, the back lit keyboard works OK. However since I refreshed the system due to the hangs up problem at start up, the back lit key board stops working. Re-updated the OS back to 8.1 Pro again still not solve the issue.Does the backlit key board need special driver ? The device manager shows the keyboard as standard PS2
View 7 Replies View RelatedI've been having problems with this notebook. I bought it just last month. After using it for a week, I noticed that it doesn't connect automatically to wifi, and sometimes you have to wait a little longer (probably an hour) for it to connect successfully to a wifi. And if ever it gets connected, the internet access says "limited". I brought it to a servcie center, they changed the wifi card, and then I guess after using it for more than a week, the same problem occured. This is a big inconvenience on my part.
View 3 Replies View RelatedLatitude E7240 has Touchpad Alps. All works fine except settings "Flick" (Gestures -> Multi Finger Gestures).
This setting works, but after some time (random period) stops working. To fix this I need restart Apoint.exe or go to settings, deselect Flick and select it again.
My laptop's BIOS has latest version A11 and all drivers installed from web site Dell.
Also, I tried to install Windows 8 and Windows 8.1 with touchpad drivers only, but this did not solve problem.
I've recently taken delivery of an E7240 with the FHD touch screen option. I am generally quite impressed with the laptop except for one thing, the touch screen buzzes. The sound is similar to a hard disk working, a bit random .. not a constant noise. The sound will immediately stop when I put a finger on the screen though which makes me think it's related to the touch screen itself.
Rebooting etc. makes no difference... shaking the laptop, smacking it (gently) etc. has no affect.....
I realise these laptops are new so perhaps there isn't much experience out there...
We have purchased and deployed a number of Latitude E7440's and E7240's and we are running into an issue with some of the E7240's. When waking from sleep while on battery power, the machine will start to wake, the display will come back and I can move the cursor but within a second or two, the cursor will freeze and the machine will become totally unresponsive. This doesn't happen on AC. I've set the power plan to 1 minute and tested over and over again and it is reproducible every time. The only way to recover from it is to power off the machine via the power button and restart it.
Right now this is happening on the original end-user's machine and 1 other deployed E7240 we were able to get back and test. I have a couple of other E7240's deployed and I have an email out to the end users to bring them in so we can check them too.
I've upgraded the BIOS from A09 to A13. I've tried switching wireless control from Intel to Windows. I've updated to the latest drivers on the Dell support site.
Machines are i7, 256GB SSD with 8GB RAM running Windows 7(64) Enterprise
We have several Latitude E7240's on our network. They are configured with Windows 7 x64. We have been having trouble with this particular model in regards to wireless connections.
When the laptop is powered on and the user logs in, the laptop connects to the wireless network, however it is not getting an IP address from the router. It sticks at "limited connectivity", and gives itself a "169" IP. It stays that way for about 5 or so minutes then finally connects.
The WLAN drivers are already to the latest version, and to "bandaid" the issue, I have to uninstall the Wireless NIC drivers then reinstall them.
At first I was thinking it may be a router issue (Which is a Sonicwall TZ210W), but it can't be because its wireless devices of differing models have no problem connecting and getting an IP address. Also, it starts working once the drivers are reinstalled (though I'm not confident this is a permanent fix).
All the E7240's have the Dell 1506 Wireless card, and are all and originally were) on driver version 10.0.0.268, A02. Also, I have tried turned off any power management settings of the WNIC prior to the driver reinstall.
I have a Latitude laptop as described above and for some reason it isn't detecting the SSD Drive.
It states: No Boot Device Found, press any key to reboot
I read on the Dell support website the laptop may need setting up in maintenance mode?
However after pressing alt+f at the Dell logo nothing happens it just tries to boot.
(There is another thread on this, but it relates to Windows 8. I am running Win 7 Pro 64 bit.)
I have a Thinkpad X1 Carbon type 3443-CTO. The Wi-Fi adapter -- never the stablest thing on earth -- is getting flakier and flakier. I am constantly having to reset or disable/re-enable it. The "connect automatically" settings for some of my existing Wi-Fi routers do not appear, so that I have to connect manually every time.
I bought an Inspiron 15 7000 series about a week ago. From the very beginning, the wifi is not working properly. It takes too much time to connect and also disconnects automatically frequently. Sometimes it shows only limited connectivity. I have updated the drivers but no change so far. All other devices in home are working properly.
View 1 Replies View Related