Theres a file in my Task Manager called "system". It just showed up yesterday, and when i try to end it, it initates a shutdown and gives me 1 minute. Luckily, I knew the Shutdown -a command, so I could stop it. The dell is also running alot slower, so its not looking good. I only want to do a reformat as a LAST resort, but if everyone agrees i need it, i will.
View 10 RepliesMy dell xps fan is running constantly without running any heavy programs like games and stuff.
Don't know what the problem is the processes in the task manager also don't show any large processes. Updated my BIOS and cleaned the vents still no change.
And all the games which i try to play either lag or don't start up. So uninstalled and updated the Nvidia drivers still no change.
My xps was normal 2 days ago and now its acting weird!!
Last week I bought an Acer Aspire E1-572 and from day one it keeps freezing to the point where I can't even access the Task Manager. Googling around this seems to be quite a common complaint. Is this an issue with Acers or Windows 8/8.1.
View 4 Replies View RelatedI just updated my Acer Aspire 5735 notebook from 3gb DDR2 to 4gb DDR2. The bios now detects 4gb total as does Vista's System Page (Control Panel/System in Ultimate 64bit)
However when i go to task manager/performance my total physical memory shows up as 3000MB and the Physical Memory Usage graph seems to reflect this 3gb total.
Is there something I need to do to get vista to detect and utilise the 4gb total?
I have a new T440 running win 7 pro 64bit. The audio is not working.
When I first boot, the sound icon in the task bar shows that the system is muted, but the mute button (f1) is not lit.
-If I press the mute button the light goes on and the indicator on the task bar shows the system is no longer muted.
-If I have sound playing, when I toggle from the light on and the tray indicating not in mute to the ligt off and the tray indicating the system is in mute, I get a split second sound.
I have installed the realtek device drivers
I have installed the lenovo system update and all of the critical and reccomended updates.
The device manager indicates that everything is working properly.
On my Pavilion dv6, a file (mobogenie/nengenie.dll) belonging to the Windows 7 system has been blocked by the anti virus/malware programn due to malware infection of this file. That is as it should be. However, pc peformance has been decreased (resources run out after 1 hrs use, lagging) as a result. What do I do? Do I have to recover Windows 7 or have clean up of my hard disc, and how?
View 1 Replies View Relatedso i have a hp 3125 base model notebook and want to install win 7 x64 in uefi file system to have ipv6 connectivity Butler dont know how to make my usb show up in boot manager menú while legacy disabled, as well as the security boot thing
View 1 Replies View RelatedHas anyone used the newest version of Control Point System Manager software?
They really really dumbed it down as now you don't have the ability to individually turn off things (SD card reader, DVD/CD Rom, etc).
If anyone does any type of power management with individual parts I'd highly advise them to avoid this version.
I am using ProBook 4530s. Last year I have installed Microsoft Home Professional 64 bit. Yesterday, I delete the partition of my linux system and after that I am getting the following error;
error: Unknown file system.
Entering rescue mode...
grub rescue>
I also followed the steps for recovery, but failed. How? I put window DVD and restart it, after performing the initial steps, On the Install screen I click "Recovery option". I got the message the I have Window 7 Installed. After clicking next, it says that the window resovery option is not compatable with window. What to do in this case. I install this window in my home country now i am in China, where every window product is in Chinese. Second I have much more research data any i do not wish clean format in any case.
[url]
I recently installed Windows 7, and I re-downloaded the Acer Empowering Technology off the Acer website.
I can access all the features, but the Empowering Button doesnt function anymore.
My laptop is an Acer Aspire 5535.
I have an acer M3 581T which I bought about a year ago. Now, windows crashed and said there was a file missing. I am no longer able to boot up the system, I've tried the erecovery (alt f10) but it just proceeds and says it's not able to boot. I have no recovery cd/usb at hand. It is of my understanding that this ultrabook has two harddrives. One SSD on which the operating system is installed and one HDD with the other files on.What do I do to make it work again? I do not care if all my files are lost.
View 9 Replies View RelatedI got my new laptop today, and got rid of the installed Dell Crap and installed my Windows 7 Ultimate 64-bit.
Now under my Device Manager I've got two issues:
Base System
Base System
I contacted Dell, they said they won't support my laptop since I don't have their operating system on it. All I want to know is what drivers I need. I can't believe they couldn't let me know.
I was using windows 7 till now on my dell studio 1555..
I had formatted the whole hdd while installing..
apart from the factory image file (*.wim) (5gb+ file) i had not backed up anything else from the recovery partition..
Can i use that Windows Imaging Format (WIM) file to restore back my laptop to factory settings ?
EDIT : I currently dont have my "Windows Vista OEM Disc" with me right now
anyone else use file assassian program? i can t get rid of it off my dell vostro-1700-xp. where have i gone wrong
View 4 Replies View RelatedI have an e4300 with 4 gigs of ram and Win7. I recently downloaded the latest Windows Update as prompted by the OS, and now I'm having an issue where everytime I start the computer it asks me to set the page file size. It's always listed as 0 megs.
So, I got to reset it using the box marked managed by the system, and when I restart the same thing happens.
So instead I chose a custom size 1.5xRam for lower limit, 3x ram for higher limit, and still eveytime I restart it gives me an automatic pop-up telling me my page file is set to zero.
I have an Inspiron 570 that had an emergency shut down and created DSB files which I have been unable to open.
View 3 Replies View RelatedMy XPS crashes with viruses so I want to restore my Vista to factory
But I have partitioned my HDD so I couldn't wake up my DELL Restore utility. My partitions are: C: for OS, D: for Data and a RECOVERY(E: ) partition that exists before.
I looked into my RECOVERY(E: ) drive and found a WIM file at: E:dellImageFactory.wim with total capacity of about 3.25GB
i have found file transfer rate is noticeably low in my XPS M1530 machine. i was transferring 1.7gb file from I partition to G partition. it started sending 22mb/sec.
then there after i found it to b reduced to 10/12 mb/sec sometimes extremely low like 3 or 4mb/sec. why is that? how can i keep it constant at 22 or 20 mb/sec transferring rate.
Okay, I have my two XPS 14’s connected via Bluetooth. However, where do my files go?
How can I find the location that they have been transferred to?
My latest odyssey with Dell has lasted over 3 weeks and ended in utter disappointment; the experience has been both frustrating and time consuming, but I notice it's not all that dissimilar to some experiences others have posted about, so I'm hoping someone can point me in the right direction.
On 11/24 I ordered a Studio 1737 with an estimated ship date of 12/5. As has been the case for many others, Dell generated a separate order for the Bluetooth module, and like many others I found this frustrating and nonsensical, but I didn't rush to judgment immediately, I decided I'd wait and see if they actually shipped it separately and uninstalled.
Of course, they did, and I received the component on 12/8. I filled out the return request form and asked for an RMA for the component, because I placed the order with the expectation it would be installed professionally. The response I received essentially excused the practice that caused the module to be shipped separately with no disclaimer, and denied me an RMA for the module. They wouldn't let me return it. I went back and forth with this guy for a week, exchanging 6 emails total, each one explaining my disappointment in greater detail than the last. After 6 emails, I still have not received an RMA. Each email merely deflected my concerns and ignored my original request by assuring me not only that I would receive my system and I would be overwhelmingly satisfied, but that he would personally see that the order was expedited.
I fell for this, until last friday, 12/12, when Dell notified me that my order had been delayed for a second time and required my consent to be processed; I logged into the order status site as the email required to provide consent, and then shot an admittedly discourteous email back to the guy who'd been feeding me disinformation for a week to avoid giving me an RMA for a lousy $20 part that plainly wasn't delivered in the condition I expected (I was really annoyed). On Monday, 12/15, I received a response for him, this time assuring me that the system would ship within 24 hours. This pacified me until about an hour later, when I received the email from Dell finally canceling my order completely.
I responded one last time (much more composed and gracious) to tell him I was receiving conflicting information regarding the order status, and to ask which was accurate. This morning, 12/16, I received a terse response from his manager telling me that the order had been canceled "due to unavoidable reasons", suggested that I contact the sales department to have my order reinstated, and asked that I reply to him if I still want an RMA for the bluetooth module (a line his subordinate fed me before, to which I responded in the affirmative).
What do you think I filled out the return request form for, or all the emails I wrote requesting a return?
I'm completely bewildered. I've wasted enough time talking to these people, and I don't intend to continue. I don't even care about returning the thing anymore. The frustration and time lost towers over the lousy $20 lost on the bluetooth module.
All this is added to the fact that Dell delayed my order twice, then canceled it blaming the federal mail order rule, despite the fact that I followed their instructions to prevent that. I don't know where to begin.
I'd like to send a letter detailing this experience detailing my frustration to Dell, on the off chance that someone there is even the slightest bit interested in customer service (then I plan on meditating for about a week and exiling this experience from my mind completely.) I just don't know where, if anywhere, to direct my complaint (the returns department obviously isn't the place, since they don't even know what to do about returns).
They didn't charge me for the system they canceled, only for the bluetooth module that should have been canceled with the system, but if I go through all the hoops they want me to to recover the lousy $20 I'll lose my mind, so it's not about money. I basically want to give them a piece of my mind, cut my losses, and be done with it. Any advice?
what is this file STACSV64.EXE ?, it's linked to which application ?,
I am having issues becuse after coming back from sleep (the Precision M6400 notebook) it will be using a big amount of CPU and the only way to solve the problem is killing it,
Fast Batch File Copy from CDs to External HDD
I have a whole bunch of data and stuff in "huge number" of old CDs. I want to consolidate them into 2 or 3 1Tb HDDs.
The CDs could be Data, Audio, Bootables.
I could go into Windows Explorer and do the drag & drop / Copy / Paste thing. A couple of issues. Windows Explorer is SLOW, and the STATUS it shows when copying files is not REAL. I'd like a REAL percentage status showing copier.
Something that helps me spend the least amount of time, attention on making this happen. Minimum Intervention.
Ideally it would be a program / app that does the following:
1 - Does fast copying
2 - Automatically creates new folders in a specified location as it copies & places the content of the next CD
3 - Prior to copying it asks what MODE the CD needs to be backed up >
ISO, Simple File Copy, Audio (Raw / mp3), "Name the Folder".
4 - Copies showing REAL status and REAL (estimated) time left until this one is complete
5- Once completed with one CD / Disk
> It NOTIFIES with Visual / Sound clue
> EJECTS the Disk
> Prompts again for next disk
> Asks same "WHAT KIND OF COPY" question for the next disk.
> Does this until all Disks are backed up - Like a BATCH of them are done.
Does some kind of Cataloging as it copies. Maybe asks for Categories / Labels / Tags.
operating system: WIN7
when i receive file ...
Came to a point when I should completely restore the OS on my Acer Aspire 4752. Neither through Alt+F10 nor through eRecovery am I able to get around a Notice with the following "please complete operating system setup process before doing system recovery". There is only one option of this notice, that is to ok it and then the current Windows 7 Home Premium OS starts and I am not able to get out of this viscous circle. The OS works and is completely set up, so I do not understand what am I prompted to do. I see a number of postings out there, but no solution. Local Acer does not seem to know anything about the problem nor it's existence.
View 5 Replies View RelatedAfter rebooting my system I now come to a screen to enter system password. Only thing is.. I never set this and there is no way around it.I have tried the take battery out reset CMOS trick that used to work in desktops to no avail.
This is the message I get after too many password attempts.
system disable key 92931076
Last month my Dell Studio 1555 broke and I can not turn it anymore. I have a new computer by now, but there are many files on my old computer which I wish to transfer to my new computer, as they are quite important to me. How do I go about doing this without having to use an Ethernet cross-over cable; or otherwise remotely power on the laptop?
View 2 Replies View RelatedI wanted to load QuickSet on a D630.
Unfortunately, I can't find the original versions (e.g. 7.1.19) on dell.com and the version that dell.com says to use (v.8.3.17, A51) is broken. If I attempt to run R180759.exe, I get "Invalid self-extractor configuration. This file may be corrupted." (The MD5 checksum is correct.)
Where can I find a working version of the QuickSet installation file?
have a DELL studio 1735 laptop that I upgraded from Vista home premium to Win 7 Ultimate. I formatted the HDD and did a complete install. I also increase the processor from T5600 to T8300. I have a BIOS of A04 and want to upgrade to A05. I get a message "Quote" you can't upgrade to A05 Bios cause your ROM IMAGE FILE IS MISSING. Though it is working fine I need the A05 bios.
View 1 Replies View RelatedMany drivers on [URL] .... Product : Inspiron-14r-5421 cannot be downloaded. It says the file is missing, how do I fix this?
View 10 Replies View RelatedCan somebody please upload the RTMBR.BIN file
I cannot find one anywhere in my laptop.