Acer :: RTMBR.BIN File
Mar 23, 2009Can somebody please upload the RTMBR.BIN file
I cannot find one anywhere in my laptop.
Can somebody please upload the RTMBR.BIN file
I cannot find one anywhere in my laptop.
I've got a 320gb Seagate Freeagent Go external hard drive which I need to transfer data from onto my Acer 6920.
All starts well with transfer speeds of around 30mb/s, the speeds then drop to around 10mb/s and more often than not the whole transfer freezes and just hangs no matter what size file I'm transfering. I've got over 200gb I need transfered but it just won't do it, even in small chunks of data.
Am going to try it on XP in work but could it be a Vista problem and would updating my Intel Matrix Storage driver help?
I have an acer aspire 5630 laptop wich have been wrongly flashed. I'm trying now to replace the bios chip (29lv008) with a new one wich i have to program on an external programmer. My problem is that the only falsh file available at acer site is an executable one (flash 32.exe). Is there a way to extract the flash file to be programmed from this .exe. Or have someone the dump file of such a laptop.
View 6 Replies View RelatedI have an Acer 8930 with the Intel WiFi Link 5100. I updated the driver to version 12.4.3.9. When I transfer a file to my moviebox (connected to a Netgear Rangemax Router via cable) I only get up to 1.2 MB/s as speed. When I transfer via my IMac I can get up to 4.5MB/s.
Looking into the advanced properties settings of the Intel WiFi Link I noticed under Wireless mode the following options:
1. 802.11a
2. 802.11b
3. 802.11g
4. 802.11b/g
5. 802.11a/g
6. 802.11a/b/g
Option 6 is selected, but should there not be an N option?
I found something once on one of my recovery CD'S. It is an ISO file called STCDBOOT. I burned the ISO image and it made some wierd boot disk. Has anone else tried this? I was wondering if this could rebuild the PQSERVICE? This ISO is on the first disk called System.
View 8 Replies View Relatedmy 4810tz keeps freezing, i've tried all the fixes on this forum, apart from re-installing windows 7 (I cant see how this can help).
what I need to know is how I can get the minidump file when my laptop locks up?
i've looked at the event log and all it says is event 41 kernal power, i need to find out what application/driver is causing the crashes!
I can't believe this can't be fixed, this is really bad on acers part.
a note to make though, this freezing happened on my gf's laptop, and she was running a core duo, so maybe its the proccessor?
Create an iso file for the windows 8.1 oem pre installed on my notebook for future references ....
View 3 Replies View RelatedHow to create an iso file for the windows 8.1 oem pre installed on my notebook for future references.
View 3 Replies View RelatedAs of today, Aspire V3-112P BIOS files, even the onboard version file, have not be available for download. When will Acer release a bios file, even the old one, for download?
F2 enter into BIOS, but found noway to backup BIOS to a file.
Fla**bleep**.exe backup.fd /g (with version 2.0) failed to backup.
So it comes to the second question: how to backup the current onboard BIOS to a file? It looks like insydeflash can't backup onboard BIOS to file without providing an existing BIOS file. It's so awful.
AO532h (Win 7) e-recovery successful (better than ever). Does one run a program to find "pre-recovery"backup files?
This file was new in.... C:/Backup/Public/...../Log/channel.ini:
[LOG PATH]C:UsersPublicOEMAcer VCMLog[UDP ONLY]OFF[LOG LEVEL]DEBUG[UDP PACKET LOWERBOUND]1[NORMAL THREAD WAIT TIME]1000[TRIAL BEFORE STOP VIDEO]3[UDP RECV DISCONNECT SEC]30[UDP SEND DISCONNECT SEC]20[KEEP ALIVE INTERVAL]500[WAIT UDP SYN TIME]20000[SYN PACKET]50[TCP RELAY THRESHOLD]1000[DYNAMIC BANDWIDTH INCOMING INTERVAL]20[DYNAMIC BANDWIDTH OUTGOING INTERVAL]50[2nd INVITATION TIMEOUT]2
I would ask if the " Associate a File Type or Protocol with a Program " Return to Default Settings when i Windows Update...
When typing in wordpad , notepad and more, why not work Ctrl + D?
But the others shortcut is working , like Ctrl + V and Ctrl + C.
I have an Aspire E15 running Windows 8.1 Pro. I want to encrypt the hard drive with BitLocker, but first I have to initialize the TPM chip. When I follow the outlined procedure for initializing the TPM chip, the Initialize option does not appear in the File menu. I tried to contact support, but they did not know what I was talking about.
View 1 Replies View RelatedMy Aspire M laptop will not boot due to the 'boot configuration file being invalid', at least, this is what the 'Recovery' blue screen states. The blue screen offers to 'Press Esc for UEFI Firmware settings, but is not responsive. I've tried F2, F8, F10, Alt+F10, F12, Space Bar, Delete and Break to try to activate the BIOS interface, all equally unsuccessful.
I followed the instructions to purchase recovery tools from Acer, but without being able to access the BIOS to set the boot order, I've just sunk another $25 into a laptop that doesn't work. The cost of service exceeds the cost of the laptop, so I'm inclined to continue trying to repair it myself. If it cant' be repaired, there is little chance I'll purchase a new Acer to replace it as this has been a very frustrating experience.
[url]
I recently installed Windows 7, and I re-downloaded the Acer Empowering Technology off the Acer website.
I can access all the features, but the Empowering Button doesnt function anymore.
My laptop is an Acer Aspire 5535.
I have an acer M3 581T which I bought about a year ago. Now, windows crashed and said there was a file missing. I am no longer able to boot up the system, I've tried the erecovery (alt f10) but it just proceeds and says it's not able to boot. I have no recovery cd/usb at hand. It is of my understanding that this ultrabook has two harddrives. One SSD on which the operating system is installed and one HDD with the other files on.What do I do to make it work again? I do not care if all my files are lost.
View 9 Replies View RelatedOne morning, laptop powers-on (Blue led on power button and on front bezel), no display, fans spin up and down, CD drive makes the usual seek sound. Attached external screen from my desktop, no display either, no POST!!. Removed HD, RAM, NIC, no change. No beeping what so ever, really looks like the notorious Acer BSOD i've read about. What I need is the EXACT name I should rename the BIOS file (JE70D118.ROM) to be able to use the Phoenix BIOS recovery function (FN+ESC+PWR) with the BIOS file on a USB key or SD card. Seems to be a national secret or something... Acer does not seem to have this documented anywhere.... including the actual BIOS recovery procedure....
View 2 Replies View RelatedI was using windows 7 till now on my dell studio 1555..
I had formatted the whole hdd while installing..
apart from the factory image file (*.wim) (5gb+ file) i had not backed up anything else from the recovery partition..
Can i use that Windows Imaging Format (WIM) file to restore back my laptop to factory settings ?
EDIT : I currently dont have my "Windows Vista OEM Disc" with me right now
anyone else use file assassian program? i can t get rid of it off my dell vostro-1700-xp. where have i gone wrong
View 4 Replies View Relatedcomplain about the differences between Apple's version of MS Office Home and the PC variety.
Speaking generally, have you noticed any issues in working on Word/Excel/Powerpoint files on your MBP that were created on a PC, and vice versa?
I'm asking because my company (as do most) uses PCs at work, and I'm wondering if there could be any issues in my working on MS Office files at home with a MBP and then planning to send them to colleagues who are using PCs.
I have an e4300 with 4 gigs of ram and Win7. I recently downloaded the latest Windows Update as prompted by the OS, and now I'm having an issue where everytime I start the computer it asks me to set the page file size. It's always listed as 0 megs.
So, I got to reset it using the box marked managed by the system, and when I restart the same thing happens.
So instead I chose a custom size 1.5xRam for lower limit, 3x ram for higher limit, and still eveytime I restart it gives me an automatic pop-up telling me my page file is set to zero.
I am having a few problems here with a dv6000. Firstly I need to point out that the power button on the machine is broken so the only way to start it is by using the quick launch keys and booting into Windows that way.
Ok, so I have been doing some routine work on my brothers machine, however, It was getting quite low on disk space on the C partition. When I originally set up his machine I created a C: and D: partition for his documents.
No problem, I thought and went into Partition Magic with the intention of removing a gig or two from D and relocating to the C partition. Of course though ,it failed and now I have about 2 gig of unpartition space.
Windows now tells me the Hal.dill is missing or corrupt. The funny thing though is that it still boots, it hangs for a few minutes on the error the restarts and boots fine and it only displays the message on a fresh boot, not on a restart.
I ran a chkdsk /p last night, but stupidly didn't run a chkdsk /r so that will be my first task tonight.
From what I have read its quite simple to re copy the hal.dill file but I am worried this may affect using Quick Launch the boot the machine.
I have an HP HDX 16T with a P8400 at 2.26GHz and 4GB ram.
The video is nVidia 9600M GT driver 7.15.11.7622 with 512 dedicated memory. The TV is a Sony 46" Bravia KDL46V2500 1080P LCD connected via HDMI.
I have an MKV file that is 1080P & 8.4GB in size that will not play correctly.
The video is choppy and the audio out of sync.
I downloaded the latest versions of the following players/codecs.
KM Player
BS Player
VLC Player
CoreAVC
SM Player
All of these exhibit the behavior, some not as bad but all have an issue playing the files. In fact it seems to be any 1080P file that gives me issues.
All of my 720P play fine with any of the players listed above.
Is my hardware not up to the task? I know HP offered a blueray drive as an option so surely this computer should be able to play 1080P....
i dont know why but Preview can not read/open any kind of files, as pdf, jpg...Even when i browse file, it cant view as image, the only way is open Photoshop to view it. How to fix the errors
View 8 Replies View Relatedhow to organize files in folders by date modified by when i modified it. I know that you can right click and use "arrange by date modified" but that sometimes arranges the files when they were modified online and not by me. I know on windows when i use Arrange by last modified it arranges it according to the date when i last downloaded it or opened it, not by when it was modified online. I would like to be arrange by date last opened or used by me.
View 3 Replies View Relatedjust got my mac last week, been using windows since forever. It's definitely a pleasure and exciting experience to us Mac OS. However there was a problem, I like to put my files on the desktop, but I couldn't figure out how to check the size of them.
View 4 Replies View RelatedI some how managed to completely screwup the file permissions ownership on my macbook (10.6). This seems to have also mirrored itself to my timemachine. So I did a clean instal of SL, and then manually moved my files from TM back across, but unfortunatley the permission for all said files are wrong.
So I went as set using cmd+I the permission to myself as owner, as checked to apply to enclosed items, thinkin that would do the trick.
Unfortunately while it did fix a few files, the majority still remain stuck with the "_unknown" as the owner, which is preventing me from opening and using pretty much everything on my mac.
Does anyone know a way to force write the owner permissions to me for ALL files in my home directory?
I have tried the repair permissions in disk utility several times, it does nothing
I have an Inspiron 570 that had an emergency shut down and created DSB files which I have been unable to open.
View 3 Replies View RelatedMy XPS crashes with viruses so I want to restore my Vista to factory
But I have partitioned my HDD so I couldn't wake up my DELL Restore utility. My partitions are: C: for OS, D: for Data and a RECOVERY(E: ) partition that exists before.
I looked into my RECOVERY(E: ) drive and found a WIM file at: E:dellImageFactory.wim with total capacity of about 3.25GB
i have found file transfer rate is noticeably low in my XPS M1530 machine. i was transferring 1.7gb file from I partition to G partition. it started sending 22mb/sec.
then there after i found it to b reduced to 10/12 mb/sec sometimes extremely low like 3 or 4mb/sec. why is that? how can i keep it constant at 22 or 20 mb/sec transferring rate.
I have failed to reflash my bios. Now only way to reflash by external programmer. send my hp 6715b file bin. I can not reflash with hp rompaq file.
View 5 Replies View Related