Acer :: Recovery CD (ISO File Called STCDBOOT)
I found something once on one of my recovery CD'S. It is an ISO file called STCDBOOT. I burned the ISO image and it made some wierd boot disk. Has anone else tried this? I was wondering if this could rebuild the PQSERVICE? This ISO is on the first disk called System.
View Complete Thread with Replies
Related Forum Messages:
Acer :: Recovery Dvds And Recovery Partition On Win 7 With Acer Tools
im planning on buying windows 7 ..
I am a proud owner of acer 7520G ,and my lappy started acting slowly after 1 year of horrible terror or windows vista...
I made those recovery cds , also i got that 10gb partition PQSERVICE...
This service works only when you got their vista+acer signed OS?
IF i install windows 7 will i be able to recover old vista via hidden partition or recovery dvds?
Will i be able to make recovery dvds and recovery partition on win 7 with acer tools?
Acer :: File Transfer Via USB On Vista
I've got a 320gb Seagate Freeagent Go external hard drive which I need to transfer data from onto my Acer 6920.
All starts well with transfer speeds of around 30mb/s, the speeds then drop to around 10mb/s and more often than not the whole transfer freezes and just hangs no matter what size file I'm transfering. I've got over 200gb I need transfered but it just won't do it, even in small chunks of data.
Am going to try it on XP in work but could it be a Vista problem and would updating my Intel Matrix Storage driver help?
Acer :: Bios Dump File
I have an acer aspire 5630 laptop wich have been wrongly flashed. I'm trying now to replace the bios chip (29lv008) with a new one wich i have to program on an external programmer. My problem is that the only falsh file available at acer site is an executable one (flash 32.exe). Is there a way to extract the flash file to be programmed from this .exe. Or have someone the dump file of such a laptop.
Acer :: 8930 Slow File Transfer
I have an Acer 8930 with the Intel WiFi Link 5100. I updated the driver to version 18.104.22.168. When I transfer a file to my moviebox (connected to a Netgear Rangemax Router via cable) I only get up to 1.2 MB/s as speed. When I transfer via my IMac I can get up to 4.5MB/s.
Looking into the advanced properties settings of the Intel WiFi Link I noticed under Wireless mode the following options:
Option 6 is selected, but should there not be an N option?
Acer :: 4810tz Keeps Freezing- Where Are The Minidumps File
my 4810tz keeps freezing, i've tried all the fixes on this forum, apart from re-installing windows 7 (I cant see how this can help).
what I need to know is how I can get the minidump file when my laptop locks up?
i've looked at the event log and all it says is event 41 kernal power, i need to find out what application/driver is causing the crashes!
I can't believe this can't be fixed, this is really bad on acers part.
a note to make though, this freezing happened on my gf's laptop, and she was running a core duo, so maybe its the proccessor?
HP/Compaq :: Want To Clean Up/format Presario C310 -- Use Recovery Disks Or Recovery Partition?
I’ve just done a clean install of my Dell Vostro -- reinstalling vista and removing the recovery partition in the process. Outcome = a ‘cleaner’ machine with none of the preinstalled bloatware/c**p from Dell. (first time I’ve done anything like this, but followed a brill guide in the Dell section of this forum ).
I’m about to tackle my Mums Compaq Presario C310EA. The aim is to remove all the rubbish she has accumulated over the years, incl any spyware/ adware she may have, and generally have a bit of a clean sweep…. hopefully resulting in a faster laptop. I’m backing up her data, and moving some of my Dad’s stuff somewhere else.
Basically I want to clean up as much as poss, but unfortunately she has no xp disk, just the recovery disks (cds) she burned when she first got the laptop.
As she has no xp disk I guess the best I can hope for is to reset the laptop to the factory settings (?) .. not ideal, but I don’t think the (factory set) bloatware is too much of an issue for her – she’s not a heavy user.
Should I use the recovery partition for this, or do I need to use the cds she burned? .
I’d like to know the best approach – and can’t seem to find a set of instructions to follow.
Dell :: Use WIM File
I was using windows 7 till now on my dell studio 1555..
I had formatted the whole hdd while installing..
apart from the factory image file (*.wim) (5gb+ file) i had not backed up anything else from the recovery partition..
Can i use that Windows Imaging Format (WIM) file to restore back my laptop to factory settings ?
EDIT : I currently dont have my "Windows Vista OEM Disc" with me right now
HP/Compaq :: Recovery Disks From Recovery Partiton
i had got a hdx 16 with home premium 64bit...due to sme reasons my OS got corrupted b4 i could take my recovery disks....so now i hav installed windows vista that i had bought for my desktop on my hdx 16.but the recovery partition is as it is.is there any way by which i can take my recovery disks from that partition..
Apple :: File Compatibility - PC--> MBP
complain about the differences between Apple's version of MS Office Home and the PC variety.
Speaking generally, have you noticed any issues in working on Word/Excel/Powerpoint files on your MBP that were created on a PC, and vice versa?
I'm asking because my company (as do most) uses PCs at work, and I'm wondering if there could be any issues in my working on MS Office files at home with a MBP and then planning to send them to colleagues who are using PCs.
Dell :: Page File Errors
I have an e4300 with 4 gigs of ram and Win7. I recently downloaded the latest Windows Update as prompted by the OS, and now I'm having an issue where everytime I start the computer it asks me to set the page file size. It's always listed as 0 megs.
So, I got to reset it using the box marked managed by the system, and when I restart the same thing happens.
So instead I chose a custom size 1.5xRam for lower limit, 3x ram for higher limit, and still eveytime I restart it gives me an automatic pop-up telling me my page file is set to zero.
HP/Compaq :: Hp Dv6000 And Corrupt Hal.dll File
I am having a few problems here with a dv6000. Firstly I need to point out that the power button on the machine is broken so the only way to start it is by using the quick launch keys and booting into Windows that way.
Ok, so I have been doing some routine work on my brothers machine, however, It was getting quite low on disk space on the C partition. When I originally set up his machine I created a C: and D: partition for his documents.
No problem, I thought and went into Partition Magic with the intention of removing a gig or two from D and relocating to the C partition. Of course though ,it failed and now I have about 2 gig of unpartition space.
Windows now tells me the Hal.dill is missing or corrupt. The funny thing though is that it still boots, it hangs for a few minutes on the error the restarts and boots fine and it only displays the message on a fresh boot, not on a restart.
I ran a chkdsk /p last night, but stupidly didn't run a chkdsk /r so that will be my first task tonight.
From what I have read its quite simple to re copy the hal.dill file but I am worried this may affect using Quick Launch the boot the machine.
HP/Compaq :: HP & 1080P MKV File Playback
I have an HP HDX 16T with a P8400 at 2.26GHz and 4GB ram.
The video is nVidia 9600M GT driver 22.214.171.12422 with 512 dedicated memory. The TV is a Sony 46" Bravia KDL46V2500 1080P LCD connected via HDMI.
I have an MKV file that is 1080P & 8.4GB in size that will not play correctly.
The video is choppy and the audio out of sync.
I downloaded the latest versions of the following players/codecs.
All of these exhibit the behavior, some not as bad but all have an issue playing the files. In fact it seems to be any 1080P file that gives me issues.
All of my 720P play fine with any of the players listed above.
Is my hardware not up to the task? I know HP offered a blueray drive as an option so surely this computer should be able to play 1080P....
Apple :: Folder File Management
how to organize files in folders by date modified by when i modified it. I know that you can right click and use "arrange by date modified" but that sometimes arranges the files when they were modified online and not by me. I know on windows when i use Arrange by last modified it arranges it according to the date when i last downloaded it or opened it, not by when it was modified online. I would like to be arrange by date last opened or used by me.
Apple :: File Permissions Stuffed
I some how managed to completely screwup the file permissions ownership on my macbook (10.6). This seems to have also mirrored itself to my timemachine. So I did a clean instal of SL, and then manually moved my files from TM back across, but unfortunatley the permission for all said files are wrong.
So I went as set using cmd+I the permission to myself as owner, as checked to apply to enclosed items, thinkin that would do the trick.
Unfortunately while it did fix a few files, the majority still remain stuck with the "_unknown" as the owner, which is preventing me from opening and using pretty much everything on my mac.
Does anyone know a way to force write the owner permissions to me for ALL files in my home directory?
I have tried the repair permissions in disk utility several times, it does nothing
Dell :: How To Backup Vista For XPS M1530 Using WIM File?
My XPS crashes with viruses so I want to restore my Vista to factory
But I have partitioned my HDD so I couldn't wake up my DELL Restore utility. My partitions are: C: for OS, D: for Data and a RECOVERY(E: ) partition that exists before.
I looked into my RECOVERY(E: ) drive and found a WIM file at: E:dellImageFactory.wim with total capacity of about 3.25GB
Dell :: File Transfer Rate Is Extremely Low
i have found file transfer rate is noticeably low in my XPS M1530 machine. i was transferring 1.7gb file from I partition to G partition. it started sending 22mb/sec.
then there after i found it to b reduced to 10/12 mb/sec sometimes extremely low like 3 or 4mb/sec. why is that? how can i keep it constant at 22 or 20 mb/sec transferring rate.
Acer :: Aspire One 110 Recovery
I have recently got an Acer Aspire One 110 Windows XP Version with 1GB ram for my girlfriend as an xmas present. Anyway while I was setting everything up for her i.e. firefox & msn etc. I spotted in the programs that there was nothing to do with Acer at all i.e. erecovery management, and the only thing was the Acer PDF manual. I then proceeded to look in disk management (right click my computer > manage) and to my shock there was no PQSERVICE or any sort of a recovery partition! The only partition was the main Windows partition! I thought maybe it was because the SSD hard disk is only 8GB. I decided to take a look at the 2 disk that I got supplied as I thought that these were the only possibe way to restore if you had an external disk drive. The 2 disk were labeled System CD & Windows XP Home Edition SP3, The System CD disk was 500MB in size and the Windows one was 2.54GB! That must be the recovery DVD then.
I decided to try and boot into the disks on my other laptop and the SystemCD disk did load up and it loaded the eRecovery program but the option to recovery was greyed out (fair enough as it was a different laptop) I then decided to boot the 2.54GB Windows disk and the laptop would not recognise it at all! I decided to look at the contents of the 2.54GB Windows disk manually through windows and all that it has it about 20 .SWM files and some other files but the only application I could see was a program called "ImageX" I then manually looked at the contents of the SystemCD disk and there was only various folders and files but no clickable applications. I am now a bit confused by these 2 disks, how am I supposed to do a full restore the aspire one now incase anything goes wrong?? Could anyone help me out with how am I supposed to these 2 disk or am I supposed to create another recovery disk using these 2 original disks? Or will these 2 disk boot up fine using an external disk drive with the aspire one?
Acer :: Recovery CD - 1360
recovering an Acer Aspire 1360 notebook from recovery CD set (Windows XP Home edition).
My harddrive got recently broken and it was not possible to boot the system. So I tried to recover the system from the PQService partition using D2D recovery. It failed saying that the image on the recovery partition is broken. I tried the set of recovery CDs then but it failed again, probably the HDD was unreadable.
I tried to format the HDD, first only drive C:, then also drive D: and finaly I got rid of the hidden recovery partition too.
Now my HDD is formated with one only primary active FAT32 partition and drive is readable.
However, when I try to recover the Windows XP from CD set it does not work. The follwoing things are happening:
1. first inserted System Disk 1/1 and booted from there
2. next I'm asked to insert the first of 2 windows CDs and recovery starts copying the image file
3. in about the half of the way it asks for the 2nd windows CD (since it is not a regular windows version, but instead win+acer apps packed into an image file, there are 2 CDs)
4. at the end of the process, I'm supposed to insert again the System bootable CD and restart. so I do.
5. The recovery process should now start copying files from the CD (I don't know what files exactly), but instead it boots again to Windows 98 environment and starts over the recovery procedure asking for the Windows CD 1/2 etc.
I'm afraid that Acer is somehow set up to have those 3 partitions there when recovering from 3CDs recovery set, so I tried to rebuild all three partitions back as they were, but I think I'm not getting it right.
Acer :: Windows7 Recovery
i recently upgraded my acer 5536 laptop to win7 from vista via the upgrade disc i received after sending off to acer as i bought the laptop last october. i had previously made a vista recovery disc using the erecovery program built into my computer.
now i've upgraded i thought i would make a win7 recovery disc but i find that the built in acer software for doing this is now not on my system.
1. how can i burn a recovery dvd that i can boot from and reset my system to its first day as win 7.
2. if the above is not possible, what would happen if i tried to recover using my previous vista recovery disc. would it put my system back to vista or completely muck everything up?
Acer :: 6930 G - Recovery
I have an Acer 6930 G. I had accidentally installed the French Vista (stupid me) and the store gave me the 2 backup DVDs I needed in order to install the English one (they had a previous customer with the same problem). So on the Acer screen, I pressed Alt-F10. I choose restore using user's backup and insert my DVD. Under Source Drive, I choose "Recovery1:Z" which is the name of my 1st recovery disk. Under Backup Point, I cannot choose anything and thus, I cannot hit the next button. I tried enabling F12, and putting USB CD ROM as first priority (didn't make sense but worth a try)
Acer :: How I Can Download Recovery CD
i suffer from long time to obtain THE RECOVERY CD of travelmate 5720g , the Acer America Online Technical Support tell me the serial number is invalid but i fuond it in bios system and bottum laptop and in the orginal box , and also the acer's work shop tell me that the serial numer is existance in thier system but when I enter in support online No accept .
Acer :: Have I Lost My E-Recovery
whether I have lost my e-Recovery from Empowering Technology. I had disabled in services as I do not use these facilities everyday and I wanted to enable them but all i get at the moment are e-Presentation manager and Power manager.
Dell :: How Do You File A Complaint With Over A Completely Botched Order?
My latest odyssey with Dell has lasted over 3 weeks and ended in utter disappointment; the experience has been both frustrating and time consuming, but I notice it's not all that dissimilar to some experiences others have posted about, so I'm hoping someone can point me in the right direction.
On 11/24 I ordered a Studio 1737 with an estimated ship date of 12/5. As has been the case for many others, Dell generated a separate order for the Bluetooth module, and like many others I found this frustrating and nonsensical, but I didn't rush to judgment immediately, I decided I'd wait and see if they actually shipped it separately and uninstalled.
Of course, they did, and I received the component on 12/8. I filled out the return request form and asked for an RMA for the component, because I placed the order with the expectation it would be installed professionally. The response I received essentially excused the practice that caused the module to be shipped separately with no disclaimer, and denied me an RMA for the module. They wouldn't let me return it. I went back and forth with this guy for a week, exchanging 6 emails total, each one explaining my disappointment in greater detail than the last. After 6 emails, I still have not received an RMA. Each email merely deflected my concerns and ignored my original request by assuring me not only that I would receive my system and I would be overwhelmingly satisfied, but that he would personally see that the order was expedited.
I fell for this, until last friday, 12/12, when Dell notified me that my order had been delayed for a second time and required my consent to be processed; I logged into the order status site as the email required to provide consent, and then shot an admittedly discourteous email back to the guy who'd been feeding me disinformation for a week to avoid giving me an RMA for a lousy $20 part that plainly wasn't delivered in the condition I expected (I was really annoyed). On Monday, 12/15, I received a response for him, this time assuring me that the system would ship within 24 hours. This pacified me until about an hour later, when I received the email from Dell finally canceling my order completely.
I responded one last time (much more composed and gracious) to tell him I was receiving conflicting information regarding the order status, and to ask which was accurate. This morning, 12/16, I received a terse response from his manager telling me that the order had been canceled "due to unavoidable reasons", suggested that I contact the sales department to have my order reinstated, and asked that I reply to him if I still want an RMA for the bluetooth module (a line his subordinate fed me before, to which I responded in the affirmative).
What do you think I filled out the return request form for, or all the emails I wrote requesting a return?
I'm completely bewildered. I've wasted enough time talking to these people, and I don't intend to continue. I don't even care about returning the thing anymore. The frustration and time lost towers over the lousy $20 lost on the bluetooth module.
All this is added to the fact that Dell delayed my order twice, then canceled it blaming the federal mail order rule, despite the fact that I followed their instructions to prevent that. I don't know where to begin.
I'd like to send a letter detailing this experience detailing my frustration to Dell, on the off chance that someone there is even the slightest bit interested in customer service (then I plan on meditating for about a week and exiling this experience from my mind completely.) I just don't know where, if anywhere, to direct my complaint (the returns department obviously isn't the place, since they don't even know what to do about returns).
They didn't charge me for the system they canceled, only for the bluetooth module that should have been canceled with the system, but if I go through all the hoops they want me to to recover the lousy $20 I'll lose my mind, so it's not about money. I basically want to give them a piece of my mind, cut my losses, and be done with it. Any advice?
Dell :: Fast Batch File Copy From CDs To External HDD
Fast Batch File Copy from CDs to External HDD
I have a whole bunch of data and stuff in "huge number" of old CDs. I want to consolidate them into 2 or 3 1Tb HDDs.
The CDs could be Data, Audio, Bootables.
I could go into Windows Explorer and do the drag & drop / Copy / Paste thing. A couple of issues. Windows Explorer is SLOW, and the STATUS it shows when copying files is not REAL. I'd like a REAL percentage status showing copier.
Something that helps me spend the least amount of time, attention on making this happen. Minimum Intervention.
Ideally it would be a program / app that does the following:
1 - Does fast copying
2 - Automatically creates new folders in a specified location as it copies & places the content of the next CD
3 - Prior to copying it asks what MODE the CD needs to be backed up >
ISO, Simple File Copy, Audio (Raw / mp3), "Name the Folder".
4 - Copies showing REAL status and REAL (estimated) time left until this one is complete
5- Once completed with one CD / Disk
> It NOTIFIES with Visual / Sound clue
> EJECTS the Disk
> Prompts again for next disk
> Asks same "WHAT KIND OF COPY" question for the next disk.
> Does this until all Disks are backed up - Like a BATCH of them are done.
Does some kind of Cataloging as it copies. Maybe asks for Categories / Labels / Tags.
Acer :: 9300 Bios Recovery
I was trying to play a video and the computer froze. I waited several minutes and nothing responded. I finally had to hold the power button to shut it down. Now it will not go to the bios screen and the screen shows a bit of brightening but does not go anywhere.
I've googled for a solution and there are several pieces of possible solutions I have found but as is too often the case, there were no follow up answers to make the posts helpful or, the answers came tantalizingly close like the following for a similar problem with an acer aspire 5315:
"1. first download the attached zip file and unzip it.
2. burn the extracted disc image to disc using nero.
3. place the newly burned cd into your laptop cd drive tray
4. remove the battery and power cord.
5. press and hold FN and ESC keep pressed and insert power cord and then press the power on button
6. your notebook should power up but without any display.
7. you should see the cd/dvd drive activity light blinking as it reads from the recovery disc.
8. if all is well your laptop should power itself down after about 2 minutes
9. once it has powered down remove the power cord and wait about five minutes.
10. finally insert your battery and power cord and power up your laptop in the normal way............
Acer :: Aspire 5500Z - No Recovery CD
I got a Acer Aspire 5500Z laptop. It was intruded by tons of virus. I realised that Acer (Singapore) did not provide me with any recovery CD. Now that I am stuck with a crap laptop, anyone can advise me on how to reformat this laptop again to its original state?
Acer :: 5670 Recovery / Windows
I want to reformat my C:/ partition but I've lost (or never had?) my original windows home cd that came with it, nor do I still have a recovery partition. (I wiped it all out...)
Where do I find an acer win xp version so I can reinstall and use my my original windows key?
Acer :: Getting Recovery Disk To Work
Bought 5530 in August but already need to run recovery disks as the photo gallery constantly crashes and using restore to an earlier date does not work. I burnt two DVD's when I got it and they looked OK. However after changing start up in BIOS to dvd drive then restarting holding down f8, when pressing the complete restore tab nothing happens except a message saying no restore dvd or HD can be found. Cannot think what to try as the disks and dvd drive appear fine. I wish they included the disks with machine like sony do then you would be 100% sure it is not the disks at fault. Anyone else encounter this? I am sure the problem with the photo gallery is not a virus as I do not use the machine on the internet
Acer :: Recreating The Recovery Partition
For reasons that are too long to explain, I managed to destroy this partition on the hard drive of my Acer 4539G laptop. So no PQservice partition and the original Acer MBR is gone too. All I have left is a couple of FAT32 partitions.
I do have the contents of the PQservice partition on a USB stick.
Is there a way to recreate the PQservice partition, so that Acer's eRecovery would work again?
Acer :: 8930 Recovery Media
I've bought two new hard disks for my beauty and plan to re-install the OS and applications over the weekend, however the application to create the recovery does not work!
How many recovery DVD's should it create?
Can I access a recovery method on bootup?