i am trying to print out a .pdf on the web, but am getting an error message (shown in attached files). it asks me this twice when i go to print it. i am using a HP printer.
i have no trouble with printing in other programs. i made sure that i am connected
I have a Dell Inspiron 15r and a Dell v313w I purchased in November 2010, both are wireless and connected through a gateway/router that have been very great over the years but about a year or so ago I noticed each time I would try to print out multiple documents I could only get one document to print out, it could include one sheet or many sheets . Any others documents would be stuck in the print queue listed as " printing " but would never print out unless I restarted the computer then it would print out all documents one after another just as they had been entered complete with all sheets per document accounted for and in correct order.
After the printer had finished printing all the documents if I needed to print another document I would have the same headache all over again and the document would remain in the queue until I restarted the computer again.I'm not a spring chicken by any means and have to think logically went operating the computer or installing software so many of the technical jargon is something I really don't understand.
I have just installed the HP 4635 printer to my network. All devices were printing yesterday wirelessly. Today the laptop device has a print job that I have requested to delete. It has said "deleting" for two days and I can not get it "unstuck". each time I send a new print job to the que it goes in line "behind" the print job that is stuck in "deleting" mode. I have tried re-starting. re-booting, ctrl, alt, delete. nothing seeings to get this print job "unstuck" and deleted.
View 3 Replies View RelatedIdeapad Z585 AMD A8-4500 1.9Ghz
AMD Radeon HD7640
My 11 month old Ideapad failed to boot last night with error 'BL Initialize Library Error 0xc0000029'. Eventually a blue screen appeared saying that multiple start attempts had failed and the system needed repair.
As suggested I tried to use One key recovery but choosing restore to factory settings leads to self same failure.Sadly I have misplaced the recovery disc I created during a house revamp so cannot try that route.
I am trying to trouble shoot my friend's computer, it is a Dell Inspiron 1525 and the printer is a Dell V305. Every time she tries to print it says Communication Not Available...
I searched google and read to reinstall the driver which I did, installed the latest driver, and installed the net framework. Nothing worked...
The only other thing I can think of is use a back up point..
Just got my Studio 15 today. So far so good. I thought Firefox was not compatible with the finger print reader, so far it's working for me with over 25 passwords already. My only concern so far is the keyboard flex!
View 9 Replies View RelatedAs the title says. Looking to see if these have anywhere near the problems the xps 1330 had.
I had to mother boards and three dvd drives replaced on the old one I had. had a second for 3 months as a replacement but sold it cause I was scared lol.
Now I have a Studio XPS 1340 and it seems great but I wonder if anyone has had any failures?
I recently have ordered an M1330 but I have been looking at some of the user pictures that do not have the finger print reader. Is this because it is not standard on the laptop and do you need to pay extra? (Im talking about the NZ/AUS version [url] theres no option to include or exclude it like the US site).
Also is it possible to upgrade from the LCD to LED in the future, if so how much?
Well the GPU on my M1330 finally gave way tonight. (At least that is what believe is causing the colored lines anyway.) My warrenty expired last summer, but as I recall Dell extend the warrenty on the GPU 12 months past the orginal warrenty. I plan on giving tech support a ring tomorrow (or Monday, I'm not sure how much luck I'd have over the weekend). Any tips from those who have been through this? What should I expect? Motherboard replacement? Refurb replacement? Any input would be welcome.
View 10 Replies View Relatedi have tried updating my computer (vista OS) with the latest updates (for security update). i tried twice (which had me restart, and i did), and both times they failed. why is this? this has happened before.
View 5 Replies View RelatedIf you're the type to watch the late stock tickers, you might have noticed that NVIDIA's stock just took a pretty big hit, down 24 percent to $13.56 -- that's because the company just informed investors that "significant quantities" of previous-generation graphics chips have been failing at "higher than normal rates," and that it's lowering its Q2 estimates due to pricing pressure. NVIDIA will be taking a $150M to $250M charge against earnings next quarter to cover the cost of repairing and replacing the affected chips, but didn't specifically announce what products were defective, just that they include GPUs and "media and communications processors." Laptop makers have apparently already been given an updated GPU driver which kicks in fans sooner to reduce "thermal stress" on the GPU, and NVIDIA says it's talking to its suppliers about being reimbursed for the faulty parts. That's great and all, but we'd really rather know which chips specifically are failing -- if you're serious about playing in the big leagues, you better come clean, guys.
For someone who has a 7900GTX which is getting "fevers" regularly, this angers me. Hopefully the "repairing and replacing" comes with new parts for laptops and customers new and old like Dell did with the LCDs.
When did your 8400M GS Fail, if at all?
View 10 Replies View RelatedI have a brand new dell precision m6400. It didnt include the finger print reader and over at part people.com i can get two different types of finger print readers.
Dell Precision M6400 Center Control Power Button Cover with FIPS Swipe Module
Dell Precision M6400 Center Control Power Button Cover with Biometric Fingerprint
Now what does FIPS Swipe Module mean?? What are the difference between them?
Anyone know if there is a way to completly disable the finger print reader? I checked the bios but i could not find anything about the finger print reader.
View 6 Replies View Relatedi couldn't believe that dell has finally released new drivers for our Ati Mobility Radeon 4570!!
Driver 8.631
Release Date: 12 October 2009
I didn't see any benefit really in installing the the mobility modder drivers(was on 9.9). My COD4 was dropping to 20fps on occasions and I only play in 1280x720 with modest settings! I thought that game ran really well even on the Nvidia 8600Ms according to so many people. But COD4 runs pretty badly on my PC, gets my GPU to hit 88C even when I'm letting it breathe and all and makes me kind of depressed.
I uninstalled everything and installed these new Dell drivers. The drivers installed, but the CCC is messed up. See attached picture for the error I get when I try opening it. Clicking on "Advanced View" gets me nothing.. Nothing shows up at all. I reinstalled the 9.9 CCC ONLY, still the same error message.
Anyone else having the same problem? Could you atleast help me with why my 4570 is performing so poorly?
She has been wanting to make the windows 7 switch, however she only has 512MB ram in it, so she ordered a 2x1GB ddr2 667 Crucial kit off Newegg for me to install.
After it arrived I popped open her memory compartment and lo and behold there were two 512 sticks already in there. I was puzzled by this, so I installed the new ram and went into the BIOS, which reported that dual channel mode was running and there was only 1024MB of memory.
I naturally thought one of the memory slots was dead so I tried each stick in one slot at a time, each time it booted up with the exact same info, 1024MB of ram. From this I can only conclude that it simply refuses to actually run dual channel, despite both slots being perfectly functional.
I have flashed the BIOS, to no avail, and now have no idea what to do.
I start the laptop.. the lights turn on.. windows loads up.. i press one of the media buttons... it lights up.. stays lit up and stays like that without doing what its suppose to..
View 3 Replies View RelatedI've had my studio xps 16 for 4-5 months now.. never had a serious problem with everything is working the way i want it to but..
this morning when i woke up i turn on music.. while increasing the volume i noticed the touch sensitive LED above the keyboard wasnt working..
I thought I'd give Windows 7 a whirl on my snazzy new machine.
So, as the number of partitions on my hard drive has been maxed out by Dell (Media, Recovery,
the enigmatic OEM partition, and C drive) I went for the upgrade option. This turned McAfee into instant nagware,
I thought "ah well, just restore vista from the dell recovery partition...
so today I was lucky enough for Dell to give me the little balloon pop-up in the bottom right hand corner saying I have an update for my BIOS... I download the file and begin the installation.
After opening up an internet explorer I notice my mini has frozen.. I freak out and wait for an hour, hoping it will clear up. I come back to my mini and find it still frozen
I've been looking for the webcam application in this laptop but I couldn't find any. Where I can find it
View 10 Replies View RelatedMy Laptop is set up so I have to check my finger print in the Bios before I can long into windows. How can I remove this option? I have done the following
1. I updated the bios to the latest version
2. I have checked ever thing in the bois to find how to remove this option. I can't find it.
3. I want to sell this computer, but can't until I get this issues resolved.
Problem:1
I have recently purchased Vostro 3550 with Finger Print reader. After i updating all drivers and checked in dell diagnostic also. Nothing happen to no response for my reader. I purchased 07-05-02012.It haven't worked while i purchased itself and i updated all drivers
Problem :2
ST MICRO SCREEN DETECTION SENSOR ISN'T COMPATIBLE WITH THIS VERSION OF WINDOWS - ? Wat i need to do for this???????????
I have checked through installing Free fall data protection. it shows nothing.
This just recently started happening on my 3 month old inspiron 15r 7520.
It doesn't do much other then add another 2-3 minutes to boot up.
Once PC starts up (which takes a long time) it works like normal.
I have a dell XPS l502x running on windows 7 home premium. I recently bought a 5550 wwan card ( Ericsson F5521gw 2XGNJ) for which i tried installing dell wireless 5550 driver. it was not successful and i got the message saying authentication failed and no compatible device detected!
Windows device manager identifies the card as "unknown device F5521gw" which probably means that the hardware is installed properly.
I have tried installing this [URL] .... driver multiple times and every single time i got a message saying "Driver installation failed. No compatible Dell Wireless HSPA Mini-Card has been found on this computer. Please insert hardware and restart the driver installation.
Having problems with M6500 and E-PORT plus II PRO2X dock.
USB 3.0 blue jacks on back of dock do not work as 3.0, work as 2.x.
The USB3.0 on side of the laptop perform as expected.
I have a Dell Inspiron 1720 with Windows Vista. The Windows is dead and always boots to a repair dialog that gives me only two options: reboot and shutdown. It also does that when trying to bot in Safe Mode. So I tried to boot on the recovery partition to try to recover my installation. The problem I have now is that the recover option needs my administrator password. I've tried 3 wrong passwords since I really don't remember it. After the third fail, I got a dialog telling me that my administrator account as been disabled! WHAT!! It disabled the only account I need to recover or reinstall!! How can I recover my PC now!!?
View 3 Replies View RelatedAnyone ever notice that half the time the finger print scanner doesnt work and you have to reboot the system for it to work again?
I get this often when I switch modes from stamina to speed and put the computer to sleep. Waking back up finger print scanner doesn't work
I have installed validity sensor driver on my hp elitebook 8440w.
However i am wondering if I can use fingerprint device without installing HP application.
FYI, I could see the device in my device manager.
I have a HP dv7-1247cl and I can't get the print screen key to work.
View 3 Replies View Related