She has been wanting to make the windows 7 switch, however she only has 512MB ram in it, so she ordered a 2x1GB ddr2 667 Crucial kit off Newegg for me to install.
After it arrived I popped open her memory compartment and lo and behold there were two 512 sticks already in there. I was puzzled by this, so I installed the new ram and went into the BIOS, which reported that dual channel mode was running and there was only 1024MB of memory.
I naturally thought one of the memory slots was dead so I tried each stick in one slot at a time, each time it booted up with the exact same info, 1024MB of ram. From this I can only conclude that it simply refuses to actually run dual channel, despite both slots being perfectly functional.
I have flashed the BIOS, to no avail, and now have no idea what to do.
I have a question about 4gb of memory on inspirons. I recently put in 4GB's memory in my inspiron (Corsair brand) and I am running XP(x86) aka 32bit. Windows sees 3.25gb's which is exactly correct.
Awhile back I read that the inspiron motherboard which is an intel, will not run the memory in Dual Channel mode, which will slow the memory down about 3-5%. However I am not sure of how true or not this is. I put the memory and checked my bios and its showing all 4GB's and "Dual Channel" enabled.
So the question is how real is this dual channel concern if the bios is saying its in dual channel mode? PS we are both running the latest bios A17.
The XPS 1645 offers choices of 4, 6, and 8GB of ram. Just out of curiosity, how can 6GB of ram be dual channel? I was under the impression that dual channel requires matching pairs, and that 6GB of ram would be one 4GB stick and one 2GB stick. However, the Alienware laptop seems to have listed what I would expect (3 and 6GB configurations not listed as dual channel).
its an HP DV6-1264CA Artist edition v.2 16" LED backlit 1366 X 768 (comp in sig)
-AMD Turion Ultra ZM-82 2.2GHz -AMD RS780 Chipset -2 x 2 Gig of Samsung DDR2-800 RAM -ATI Mobility HD4650 1 Gig GDDR3 -1x Western Digital Scorpio Blue 500GB
All that on Vista Home Premium 64 bits. It's nice by the way, and I can play COD4, Doom3, HL2, Quake4 (my faves) at high details...of course I don't max out Crysis...lol but for last year's games, it's fine, especially for a lappy that cost $999 Canadian
I'm running all kinds of diagnosis tools to check on everything on the lappy:
-Everest Ultimate, CPUZ & others...
There is NO mention about the RAM running in dual-channel. In CPUZ, where I should see DUAL, the area is grayed out. I know there is 2 sticks of Samsung DDR2-800 (2 slots and the platform is able to run dual-channel according to AMD).....
My current RAM is: 1gb Corsair DDR2 667mhz (default from manufacturer) and 2gb Mushkin DDR2 800mhz
I searched through the internet that Acer 5920G can only support up to 667mhz.
The problem is, I'm planning to add 1gb more RAM, so it will be 2 x 2gb Mushkin 800mhz, since both of them will be downclocked to 667, will both of them still run in dual channel mode ?
I wanted to buy 667mhz one, buy every shop near my place says that 667mhz ram not distributed anymore and the price is quite the same.
I want to enable my RAM in dual channel mode... what is the process to do this? i have already checked in CPU-Z that it is currently in single channel mode.
I posses a dell 9400/e1705. Currently I have 2GB of RAM installed (in one piece). I was thinking of installing an additional 2GB. I was wondering if there is any sense in doing so.
First of all I have 32bit system, so the whole amount (4GB) will not be recognized. Secondly I am unsure if I will notice any increasement in performance. I mainly use the computer for photo retouch in Photoshop (I operate on big RAW files) and sometimes I install games.
A friend of mine said this would a good idea beacause even though the system will not see 4GB the chipset will allow the two memories to work in dual channel (If i were to add just 1GB I would have a total of 3GB but no dual channel).
I upgraded RAM on my W530 and it's working only in single channel mode. How to enable dual channel in BIOS? Â Here is screenshot about my RAM : [URL] .....
I posted it in the accessories forum, but didnt get much response..was wondering if you dell guys have a better idea on this.
Basically, I have a 2.5 year old Dell E1505 with ATI x1400 on it. I just bought a new Samsung T220HD monitor and I love that thing. But, when I first hooked it up and everything and ran dual monitors, my external screen flickers about once every 5 mins.
Then when I adjusted a few things, the external screen stopped flickering, but my laptop screen started to flicker, once every 5 mins or so. When I watch tv on my this monitor (it has a tuner built in),
there is no flickering, and when I use my external monitor as my main monitor (by closing the lid of my laptop),
I just purchased a used Elitebook 8540w with i7 quad core and four memory slots (I love it!).  It is running 64 bit Windows 7 Professional  It came with one 4gb memory module and I purchased an additional 4gb module to bring total RAM to 8gb.   I have the HP document that shows for two 4gb memory modules, one should be in memory slot 1 and the other in memory slot 3 for correct functioning of dual channel memory.  All set right?  Not quite.  In the Elitebook 8540w, the primary memory slots under the keyboard are clearly labeled "1" and "2"  However, the expansion memory slots on the underside of the chassis are also clearly labeled "1" and "2"  Opps!  There is no "3" and there is no "4"  In which of the unfilled three slots do I install the second 4gb module for correct functioning of dual channel memory?
My 11 month old Ideapad failed to boot last night with error 'BL Initialize Library Error 0xc0000029'. Eventually a blue screen appeared saying that multiple start attempts had failed and the system needed repair. Â As suggested I tried to use One key recovery but choosing restore to factory settings leads to self same failure.Sadly I have misplaced the recovery disc I created during a house revamp so cannot try that route.
I have the docking station which has an output for digital coax audio. Dell is telling me that the m65 is limited to 2 channel output. Is this true or is there a driver that I can download to fix that?
It sure does look like that Clevo 18in revealed sometime ago.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didn’t touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
It sure does look like that Clevo 18in revealed sometime ago. This is not an OCZ Whitebook rebrand.
[url]
Quote:
Under the hood of the 17.1-inch Firefly we found a 2.4GHz Intel Core 2 Extreme Quad Core CPU, 4GB of RAM, a pair of ATI Mobility Radeon HD 3870 GPUs running in CrossFire mode, and a 7,200 rpm 250GB hard drive. The Firefly spec sheet said the machine is capable of overclocking, but we didn’t touch the BIOS.
And a MultiTouch trackpad, Backlit keyboard (with m15x-esque customizable colours), Creative X-Fi audio and a Dual Hinge like the HDX 20.
I have recently purchased a W540 and connected to my Dell u3011 30" monitor. I used the Dual Link DVI-D cable that came with the monitor and plugged it into my Ultra Dock. The maximum resolution i can get is 1920x1080? When i change over to a Display port cable i can achieve the full 2560 x 1600 resolution? Is there something i need to do in addition to achieve the full 2560x1600 resolution with the DVI-D dual link cable? I want to be able to connect 2 laptops to the one monitor and only have 1 display port input so i need to be able to use the DVI cable on the 2nd machine while still achieving 2560x1600 resolution.
I have looked up both the motherboard (Wistron 30b5) and my laptop model but cannot find whether it supports dual channel ram. I have the Sempron CPU. I currently have 2x1gb on order but if it doesn't support dual channel then I will return it for a 1x2gb and keep a 512mb stick in the second slot.
While we are at it, does anyone know which processors could be used with this mobo?
I've got 2 separate but really annoying issues with my W540 20BH: Â - display brightness keys not working: when waking up from Hibernation mode, sometimer (really, randomly!) the display brightness keys (Fn+F5/F6) don't work.... either if the display brightness is stuck on max, min or an intermediate level...Is there a way to shut down and restart the process which commands the Fn keys? Â - audio channel commutation gets stuck. Normal behaviour of the audio configuration is: 1) speaker volume disabled, mic disabled 2) when plugging in a 4-pin headset, headset's volume is on, headset's mic is switched on; speaker volume is still disables. 3) when unplugging the headset, speakers' volume is still 0 Â After each boot, the audio channel is at 0, but doesn't commute to the headset when plugged in! I have to open Configuration Panel, realtek properties. With this window open, unplug and re-plug the headset. Now, the volume has its normal behaviour. Â Any better way to configure audio channels and evenments, which is able to bypass realtek's manager?
i am trying to print out a .pdf on the web, but am getting an error message (shown in attached files). it asks me this twice when i go to print it. i am using a HP printer.
i have no trouble with printing in other programs. i made sure that i am connected
As the title says. Looking to see if these have anywhere near the problems the xps 1330 had.
I had to mother boards and three dvd drives replaced on the old one I had. had a second for 3 months as a replacement but sold it cause I was scared lol.
Now I have a Studio XPS 1340 and it seems great but I wonder if anyone has had any failures?
Well the GPU on my M1330 finally gave way tonight. (At least that is what believe is causing the colored lines anyway.) My warrenty expired last summer, but as I recall Dell extend the warrenty on the GPU 12 months past the orginal warrenty. I plan on giving tech support a ring tomorrow (or Monday, I'm not sure how much luck I'd have over the weekend). Any tips from those who have been through this? What should I expect? Motherboard replacement? Refurb replacement? Any input would be welcome.
i have tried updating my computer (vista OS) with the latest updates (for security update). i tried twice (which had me restart, and i did), and both times they failed. why is this? this has happened before.
If you're the type to watch the late stock tickers, you might have noticed that NVIDIA's stock just took a pretty big hit, down 24 percent to $13.56 -- that's because the company just informed investors that "significant quantities" of previous-generation graphics chips have been failing at "higher than normal rates," and that it's lowering its Q2 estimates due to pricing pressure. NVIDIA will be taking a $150M to $250M charge against earnings next quarter to cover the cost of repairing and replacing the affected chips, but didn't specifically announce what products were defective, just that they include GPUs and "media and communications processors." Laptop makers have apparently already been given an updated GPU driver which kicks in fans sooner to reduce "thermal stress" on the GPU, and NVIDIA says it's talking to its suppliers about being reimbursed for the faulty parts. That's great and all, but we'd really rather know which chips specifically are failing -- if you're serious about playing in the big leagues, you better come clean, guys.
For someone who has a 7900GTX which is getting "fevers" regularly, this angers me. Hopefully the "repairing and replacing" comes with new parts for laptops and customers new and old like Dell did with the LCDs.
i couldn't believe that dell has finally released new drivers for our Ati Mobility Radeon 4570!!
Driver 8.631
Release Date: 12 October 2009
I didn't see any benefit really in installing the the mobility modder drivers(was on 9.9). My COD4 was dropping to 20fps on occasions and I only play in 1280x720 with modest settings! I thought that game ran really well even on the Nvidia 8600Ms according to so many people. But COD4 runs pretty badly on my PC, gets my GPU to hit 88C even when I'm letting it breathe and all and makes me kind of depressed.
I uninstalled everything and installed these new Dell drivers. The drivers installed, but the CCC is messed up. See attached picture for the error I get when I try opening it. Clicking on "Advanced View" gets me nothing.. Nothing shows up at all. I reinstalled the 9.9 CCC ONLY, still the same error message.
Anyone else having the same problem? Could you atleast help me with why my 4570 is performing so poorly?
I start the laptop.. the lights turn on.. windows loads up.. i press one of the media buttons... it lights up.. stays lit up and stays like that without doing what its suppose to..
so today I was lucky enough for Dell to give me the little balloon pop-up in the bottom right hand corner saying I have an update for my BIOS... I download the file and begin the installation.
After opening up an internet explorer I notice my mini has frozen.. I freak out and wait for an hour, hoping it will clear up. I come back to my mini and find it still frozen
