I have the docking station which has an output for digital coax audio. Dell is telling me that the m65 is limited to 2 channel output. Is this true or is there a driver that I can download to fix that?
View 3 RepliesI've got 2 separate but really annoying issues with my W540 20BH:
- display brightness keys not working: when waking up from Hibernation mode, sometimer (really, randomly!) the display brightness keys (Fn+F5/F6) don't work.... either if the display brightness is stuck on max, min or an intermediate level...Is there a way to shut down and restart the process which commands the Fn keys?
- audio channel commutation gets stuck. Normal behaviour of the audio configuration is:
1) speaker volume disabled, mic disabled
2) when plugging in a 4-pin headset, headset's volume is on, headset's mic is switched on; speaker volume is still disables.
3) when unplugging the headset, speakers' volume is still 0
After each boot, the audio channel is at 0, but doesn't commute to the headset when plugged in! I have to open Configuration Panel, realtek properties. With this window open, unplug and re-plug the headset. Now, the volume has its normal behaviour.
Any better way to configure audio channels and evenments, which is able to bypass realtek's manager?
The XPS 1645 offers choices of 4, 6, and 8GB of ram. Just out of curiosity, how can 6GB of ram be dual channel? I was under the impression that dual channel requires matching pairs, and that 6GB of ram would be one 4GB stick and one 2GB stick. However, the Alienware laptop seems to have listed what I would expect (3 and 6GB configurations not listed as dual channel).
See below.
[XPS 1645]
4GB Shared Dual Channel DDR3 [Included in Price]
6GB Shared Dual Channel DDR3 [Add $225.00]
8GB Shared Dual Channel DDR3 [Add $375.00]
[Alienware M15x]
3GB DDR3 at 1066MHz [Included in Price]
4GB Dual Channel DDR3 at 1066MHz [Add $50.00]
6GB DDR3 at 1066MHz [Add $200.00]
8GB Dual Channel DDR3 at 1066MHz [Add $350.00]
She has been wanting to make the windows 7 switch, however she only has 512MB ram in it, so she ordered a 2x1GB ddr2 667 Crucial kit off Newegg for me to install.
After it arrived I popped open her memory compartment and lo and behold there were two 512 sticks already in there. I was puzzled by this, so I installed the new ram and went into the BIOS, which reported that dual channel mode was running and there was only 1024MB of memory.
I naturally thought one of the memory slots was dead so I tried each stick in one slot at a time, each time it booted up with the exact same info, 1024MB of ram. From this I can only conclude that it simply refuses to actually run dual channel, despite both slots being perfectly functional.
I have flashed the BIOS, to no avail, and now have no idea what to do.
I have a Inspiron 1420 with 2GB of RAM. It's probably two sticks (my wife's using it now so I can't check) of 1GB.
Question:
If I want 3GB of RAM, and replace one of the 1GB modules with a 2GB one, will I lose any dual channel benefits?
its an HP DV6-1264CA Artist edition v.2 16" LED backlit 1366 X 768 (comp in sig)
-AMD Turion Ultra ZM-82 2.2GHz
-AMD RS780 Chipset
-2 x 2 Gig of Samsung DDR2-800 RAM
-ATI Mobility HD4650 1 Gig GDDR3
-1x Western Digital Scorpio Blue 500GB
All that on Vista Home Premium 64 bits. It's nice by the way, and I can play COD4, Doom3, HL2, Quake4 (my faves) at high details...of course I don't max out Crysis...lol but for last year's games, it's fine, especially for a lappy that cost $999 Canadian
I'm running all kinds of diagnosis tools to check on everything on the lappy:
-Everest Ultimate, CPUZ & others...
There is NO mention about the RAM running in dual-channel.
In CPUZ, where I should see DUAL, the area is grayed out.
I know there is 2 sticks of Samsung DDR2-800 (2 slots and the platform is able to run dual-channel according to AMD).....
I have looked up both the motherboard (Wistron 30b5) and my laptop model but cannot find whether it supports dual channel ram. I have the Sempron CPU. I currently have 2x1gb on order but if it doesn't support dual channel then I will return it for a 1x2gb and keep a 512mb stick in the second slot.
While we are at it, does anyone know which processors could be used with this mobo?
My current RAM is:
1gb Corsair DDR2 667mhz (default from manufacturer) and
2gb Mushkin DDR2 800mhz
I searched through the internet that Acer 5920G can only support up to 667mhz.
The problem is, I'm planning to add 1gb more RAM, so it will be 2 x 2gb Mushkin 800mhz, since both of them will be downclocked to 667, will both of them still run in dual channel mode ?
I wanted to buy 667mhz one, buy every shop near my place says that 667mhz ram not distributed anymore and the price is quite the same.
I want to enable my RAM in dual channel mode... what is the process to do this? i have already checked in CPU-Z that it is currently in single channel mode.
View 1 Replies View RelatedI have a question about 4gb of memory on inspirons. I recently put in 4GB's memory in my inspiron (Corsair brand) and I am running XP(x86) aka 32bit. Windows sees 3.25gb's which is exactly correct.
Awhile back I read that the inspiron motherboard which is an intel, will not run the memory in Dual Channel mode, which will slow the memory down about 3-5%. However I am not sure of how true or not this is. I put the memory and checked my bios and its showing all 4GB's and "Dual Channel" enabled.
So the question is how real is this dual channel concern if the bios is saying its in dual channel mode? PS we are both running the latest bios A17.
I posses a dell 9400/e1705. Currently I have 2GB of RAM installed (in one piece). I was thinking of installing an additional 2GB. I was wondering if there is any sense in doing so.
First of all I have 32bit system, so the whole amount (4GB) will not be recognized. Secondly I am unsure if I will notice any increasement in performance. I mainly use the computer for photo retouch in Photoshop (I operate on big RAW files) and sometimes I install games.
A friend of mine said this would a good idea beacause even though the system will not see 4GB the chipset will allow the two memories to work in dual channel (If i were to add just 1GB I would have a total of 3GB but no dual channel).
I upgraded RAM on my W530 and it's working only in single channel mode. How to enable dual channel in BIOS?
Here is screenshot about my RAM : [URL] .....
I just purchased a used Elitebook 8540w with i7 quad core and four memory slots (I love it!). It is running 64 bit Windows 7 Professional It came with one 4gb memory module and I purchased an additional 4gb module to bring total RAM to 8gb.
I have the HP document that shows for two 4gb memory modules, one should be in memory slot 1 and the other in memory slot 3 for correct functioning of dual channel memory. All set right?
Not quite. In the Elitebook 8540w, the primary memory slots under the keyboard are clearly labeled "1" and "2" However, the expansion memory slots on the underside of the chassis are also clearly labeled "1" and "2" Opps! There is no "3" and there is no "4" In which of the unfilled three slots do I install the second 4gb module for correct functioning of dual channel memory?
I ordered new E6500 that came with Vista on it and I wiped that and have installed XP Pro SP2 on the machine. I have followed the guide on this page and installed everything in the correct order. The only thing that didn't install was the dial-up modem. It errored out and said "No MODEM device was found". Typically on the Latitude laptops I seem to remember installing the modem driver and it taking care of this entry in the device manager, but not this time.
There is a dial-up modem on the laptop and this is the only device that looks to not be installed. There is no webcam, WAN modem, or anything else like that.
Has problem with installing XP onto a E6500? Is the installer for the modem driver just bad or is there possibly something else going on.
The sound on my HP Pavilion G6-1a19wm is not working. Sound "does" work when using the audio jack with external speakers. I have tried uninstalling the driver, updating the driver, microsoft fix-it, and troublshooting steps. audio device shows in device manager and is supposedly working properly, mute is "not' enabled. visually all audio related things suggest that the audio is fine and troubleshooting finds no problems..
View 3 Replies View RelatedI have HP envy 15 j002er laptop. Originally I got it with Windows 8 but then I changed operation system to Windows 7 Pofessional (64-bit).I can`t install IDT high definition audio codec on it. I guess that is the reason why I don`t have and I can`t use Beats Audio interface on my laptop (only speakers are working). There are no audio drivers for Windows 7 available for download on HP website. When I`m cheking for driver updates via HP support, it proposes me only updates for Chipset, Graphics, Network, etc.And no Audio Driver..How can I solve it and install IDT high definition audio codec?
View 6 Replies View RelatedI have recently bought a new probook450 g2 but whenever i play a video or audio file an interrupt occurs like a buzz after fixed interval, I don't know what to do ......
View 2 Replies View RelatedI have a hp pavilion 15-e078ea, core i5 processor, 2.6ghz, 8gb ram, windows 8.1 64bit....
After updating windows to 8.1 the dts audio control panel will not allow me to use audio enhancements or
the graphic equalizer....
I have looked on hp support and done all driver updates and it is still not working....
I am assuming this is a software issue. will there be an update?
Yesterday I uninstalled IDT Audio driver by mistake. Now my NB doesn't have any sound. Where can I download the IDT audio installer for my NB?
Version that I use is showing as Windows 7 64 Home Prem OA.
Product Number: B5A09UA#ABA
Model Name: HP Pavilion g6-2040nr Notebook PC
HP Pavilion dv6-7030tx Entertainment Notebook PC
Windows 7
Intel i7-3610QM CPU @2.3GHz
8Gb Ram
I have no audio. It has been previously working, but suddenly stopped. On the small speaker icon there is a red cross indicating "No Audio Output Device is enabled" When I log on to the computer i get a window that says "CWindowsSystem32AUDIOSES.DLL is not designed to run on Windows or it contains an error."
I have attempted to Troubleshoot but unable to get any sound. I have updated the Audio driver, but it is the up to date driver.
Device Manager: - Sound Video & Game Controllers
Bluetooth Hands free AudioCyberlink Webcam Virtual DriverIDT High Definition Audio CODECIntel Display Audio
I have followed the instructions in Testing for Hardware Failure on HP Support.
Recently bought HP ENVY m6-1231ea with beats audio and tripple bass subwoofer. But how to get working subwoofer ? Pressing fn + b does nothing...
View 2 Replies View RelatedI recently bought a HP ENVY TouchSmart 15-j009wm which initially had windows 8, I installed a new O. S. Windows 8.1 64 bit and lost the driver pack for beats audio, I have been searching online for a download but cant seem to get a link to download.
View 1 Replies View Relatedwhen i hook up my second monitor useing the hdmi port and switch the monitor mode to extend the audio stops working. The volume mixer still shows audio movement but will not output the audio.
View 1 Replies View RelatedI need a driver for Altec Lansing speakers with Dolby Advanced Audio, win7 64 bits. Model hp pavilion g6 2244sa.
View 1 Replies View RelatedI am using HP 2000-2313TU Notebook PC laptop with windows 8 64 bit operating system. From the last few days i am facing some problems in audio..when i am opening my laptop the sound system is working well...but when i am not continuing any audio application( busy in some other work..) and after sometime say 20-30minutes when i am opening any audio or video file it is running without any sound..when i am restarting my computer again audio device works...if i am not using the audio files after opening my computer also this problem happens after sometimes when i play some audio files.
View 1 Replies View RelatedI have updated my HP Pavilion G6 2242sf to Windows 8.1 and the sound quality is not as good as in Windows 8 : In the Dolby control panel the equalizer works but switch the Dolby Advanced Audio checkbox has no effect so there is no more surround virtualization and the 3 effects "Movie", " Music", and "Voice" are not working anymore.Now my laptop speakers sounds choppy.
View 4 Replies View RelatedI downgraded from win 8 to win 7 with a clean install and although I have the sound workling I cant find the correct driver in other forum posts to get beats audio installed. Link to the correct download :
Also I would like to get the on screen volume indicator back.
Pavilion -15-p145na
Windows 7 home premium 64bit
After i installed windows 8.1 64 bit on my device, the audio beats control doesn't appear and i don't know if it's working properly or not, and i don't know if it's built in the original speakers.
My Device: HP Pavillion 15-p150ne
OS: Windows 8.1 64 bit
I'm owning an ultrabook - HP SpectreXT 13-2106TU. No sounds coming out from my laptop for a few days now. I've tried troubleshooting - it says : IDT High Definition Audio CODEC has a driver problem.
View 3 Replies View RelatedI have a HP Pavilion G6-2252sa Notebook running Windows 8 and I have just installed 8.1. All is OK, except the equalizer function in Dolby Advanced Audio V2 is no longer working. You can still move the equalizer sliders but the actual sound quality remains the same. It just sounds flat as if all sliders are permanently set at zero.
View 4 Replies View Related