HP 15-r022tx OS/Software :: Notebook PC Doesn't Boot Windows 8.1
Aug 20, 2014
I bought a new HP 15-r022tx Notebook PC  just 15 days back . It has now started giving problems when booting. The screen goes blank during the boot the wifi lights and the other lights blink. I don't know why a brand new notebook should have this issue.Â
Mostly its an indication of improper RAM or Hard disk . I have an ADP. Do i go for the replacement of this piece.? Also on searching on the internet i  have found this issue very common among the HP laptops. Is there any setting that i might be missing?Â
View 4 Replies
ADVERTISEMENT
Mar 15, 2012
I'm running on an HP G72-b66US Notebook with Windows 7 64-bit
Â
Every time I boot it up, I see the Hp logo appear and then go away after a few seconds like usual but instead of seeing the Windows logo, theres just a blank black screen command prompt and nothing happens at all. I did a self hard drive test and memory test in bios and they both passed. I tried going into the system recovery option on startup and it does the same as when I start it up and go to that blank command prompt.
View 9 Replies
View Related
Aug 7, 2014
I have installed Windows 8.1  and  install most of the drivers fro HP reccomended link. Even after that I am not able to adjust my brightness and WIFI .
View 5 Replies
View Related
Dec 30, 2014
my acer just went black i can power off and on but windows doesn't boot up just the black screen and the cursor arrow showing
View 4 Replies
View Related
Dec 7, 2014
How can I increase the speed and sensitivity of the touchpad (mouse) of my HP 15-r022TX notebook?
View 2 Replies
View Related
Jan 9, 2009
I had to replace the DC jack in my Inspiron 9300 and it appears to work correctly. Plug a battery in and it charges just fine. However when I turn the computer on it does not POST (or beep in any way at all). I turn on the power, the fans spin up, the HDD spins up, and then about 5 seconds later it all just shuts down. Ive tried taking the HDD and the RAM out to try and get some sort of beep code and i get nothing.
View 9 Replies
View Related
Aug 21, 2009
I have windows 7 RC installed on my VGN-SR 430J/B. I download Sony Notebook Utilities drivers. I got an error message that battery is not compatiblie, press OK to hibernate. I uninstalled it immediaty, but I may want to install it again. How can I avoid this?
View 10 Replies
View Related
Mar 2, 2014
I have a 15t j-000. I'm not sure if this notebook came with a dedicated video card. In ccleaner or in the device manager only the onboard Intel graphics appear. But on the notebook has NVIDIA GEFORCE the sticker. It may be a problem of recognition? I've tried installing the driver but says there is no compatible hardware.
View 2 Replies
View Related
Nov 30, 2011
i have a Envy TS m7 computer with windows 8.1 64bit. I purchased a z8000 bluetooth mouse but i can't get my computer to see it. i have checked the the box "allow bluetooth devices to find this PC".
View 9 Replies
View Related
May 22, 2009
I have just tried 2 x 4GB Corsair but my Z690 doesn't boot. Anyone who successfully boot Z with 8GB can suggest some other brands?
View 10 Replies
View Related
Mar 8, 2010
I have a HP Pavilion DV5-1235dx(model) that I bought 1 year ago.
And 1 week ago its got out of order! Broked! Don't BOOT! I don't know why, but I tryed a lot of ways to do it! But doesn't work!
I have a medium knowlege of computers, but other people said me that can be the Motherboard! Really? I think that maybe the problem is other...
I'll explain what I did to try fix it.° I'd took out the HD, and tryed turn it on in SATA/USB adapter. But my Desktop doesn't Recognized the Removable Disk! (The adapter is working I tested with other HD) ºI'd tryed boot without HD. ºI'd tryed to put other HD with Ubuntu that I have working.ºI'd tryed boot with WinCD (XP/VISTA/7). Didn't work either.My BIOS lists the CD-ROM Drive but didn't anyone of HDs that I installed then.
The START is ever the same. Doesn't matter what I do, the "HP Start BOOT Screen" load, enter in a black screen and doesn't load the OS.
View 8 Replies
View Related
May 28, 2010
I erased the free space on my hard drive because it OS X claimed it was full even though it wasn't. I was forced to quit at the end while it was stalled at "Creating temporary file" for 3 hours. I restarted the computer and this was the result:
YouTube - MBP boot attempt
It boots to the login screen, gives me a warning that the hard drive is full, allows me to log in, but then doesn't load any icons, the dock, or the menu bar. Key commands like cmd-shift-Q still work to log out and stuff.it didn't switch from the login image (that graffiti thing) to my desktop background, which is a jungle cat of some sort, but the mouse cursor still works, as you can see in the video.
View 5 Replies
View Related
May 23, 2009
My friend's macbook (white plastic, 2.0, napa/core2 before santa rosa platform) isn't starting, and I have no idea why. He initially asked me to replace the top and bottom casing. I accepted, and ordered the parts. Around the time they were supposed to come, I took the computer apart completely (required for the repair), but one of the parts was delayed, so the computer sat splayed on my desk for a week. I didn't exactly stack textbooks on it, but it also wasn't covered in anti-static wrap. So, now, I finally got the part and put it back together, and the computer doesn't start. At all. The screen doesn't go grey, the 'sleep' light doesn't turn on, the fan doesn't start - nothing. The magsafe light is green, so the power is going in. It's also worth noting that I have no battery for it, so it's all on A/C.
Does anyone know what's wrong? My two hypothetical solutions are (a) I need a battery, or (b) the logic board is dead due to static.
How likely are each of these scenarios - especially the logic board one? How possible is it that it was static overloaded?
View 10 Replies
View Related
Nov 10, 2008
After I turn on the power, the harddisk led doesn't turn on, just the CAP and NUM led flash once. The screen doesn't turn on, even the Acer logo doesn't appear. I can hear something is turning inside the notebook, but it's definitely not the harddisk.
I wonder if I had pressed some wrong buttons, and disable the notebook.
View 10 Replies
View Related
Feb 10, 2009
Today I opened (only by removing the bezel) it up and saw the connector that was making to problem. I took out the screen to have a better look at it. I did this by simply unplugging one cable. I had a look at it and put it back in. During the process I saw the power indicator flash. Then when I turned it on after reinserting the screen, the laptop did not turn on at all. Also, the power indicator doesn't light up either.
View 8 Replies
View Related
Dec 10, 2008
My 1 year old Acer Aspire 9920 suddenly stopped working yesterday for no particular reason. It seems dead.
When I turn it on, the lights go on as they should but the screen doesn't at all. Then it just does nothing anymore.
I tried using an external monitor, the screen still doesn't turn on.
I also tried starting from a cd but it seems as if the notebook doesn't get into the POST far enough to do so.
View 10 Replies
View Related
Apr 15, 2010
I dropped my Sony Vaio VGN-AW125J laptop, my foot broke the fall, but a portion hit a table on the way down. My AC jack was banged up, so I ordered the part from Sony. My computer repair guy said that the new jack hasn't made a difference and still can't get power. He said it wasn't the operating system since he pulled out hard drive and it still doesn't power up. My original symptoms were when I powered it up, it would pretty much shut down after a few seconds.
Is there anything I can ask my computer guy to check before we trash it?
View 10 Replies
View Related
Oct 11, 2014
I've noticed that my laptop doesn't start at first power on. A push the start button, Lenovo image is showing but after few second the power go off. I need to push again the power button and then the laptop start without problem.
View 7 Replies
View Related
Jan 31, 2009
My Acer laptop died on me sometime last year, I tried to fix it, had somebody who is more techie than me look at it and we couldn't fix it. He managed to get all the data off but couldn't get it to boot up.
My brother recently had a similar problem with his desktop computer so he told me to put an XP disc in and change the BIOS so it booted from the CD ROM.
I have done this and it wont boot. It doesn't seem to recognise there is a disc in there.
When it loads, the Windows XP screen comes on, then a blue screen flashes up, can't read what it says as it doesn't stay on long enough, then the Acer screen comes up then the screen asking if you want to start up in safe mode etc comes up, if I select start as normal or from last know good configuration, it just keeps looping but if I select safe mode, a huge list of drivers comes up then it turns itself off.
I have tried to do the built in recovery but it doesn't work, just stays on please wait for hours.
View 5 Replies
View Related
Jun 3, 2009
i'm having a issue with my santa rosa mbp. I left for dinner and left my notebook on. Naturally the machine went to sleep. After i came back the machine would not boot up, the screen doesn't even turn on. The light on the latch release remains on. When i try a hard reboot, i'm having the same issue. Black screen, doesn't even get to the grey screen with the apple logo. I've tried going on 1 dimm or ram to see if it's a issue with the ram and still doesn't fix it.
View 10 Replies
View Related
Jan 25, 2015
I was given a nice E6510 that doesn't boot. I've taken it apart and tested the memory, all the connections, reseated the processor (yes I used arctic silver) and it never gets past the 'one time boot menu', the diagnostic boot freezes but I CAN get to the very complex BIOS version A16.
So, I bought a new MOBO thinking that would solve the boot issue but it hasn't-it's doing exactly the same thing. may indicate the problem-Dell calls this an "OPTION ROM", may be 'unseated' or the system board is bad.
What is "Option ROM" and how can it be reseated? Are there any other things I can do in BIOS to change this? I also replaced the SATA CDROM and the hard drive, and I know the USB port works okay but nothing will boot from them.
View 1 Replies
View Related
Feb 9, 2013
I would boot from USB but the USB device doesn't appear in the list of bootable device.... I also upgrade my bios to the latest version: A02 but it doesn't solve the problem.... What could I do?
Also I was thinking to upgrade using a bios of similar model like the XPS 15z, could give problem use a different model bios?
View 2 Replies
View Related
Oct 28, 2009
I've attempted updating my XPS 1640 BIOS to A11 in my notebook.
It hanged up at the half of it (it said "Erasing block 16 of 32") and after waiting for 1 hour, I restarted the computer...
Now it doesn't start up, when I press the power button, the 3 volume keys start to blink for some seconds, then the keyboard light turns on, and the computer turns off after a couple of seconds.
View 10 Replies
View Related
Feb 4, 2013
My laptop doesn't want to boot...the screen backlight comes on but nothing else happens. The light that I think means HDD access blinks but the fan doesn't come on it just doesn't do anything. What tips can I get from the pros?
View 11 Replies
View Related
Mar 26, 2013
I'm trying to install Windows 8 in my DELL Inspiron 1525. But, it doesn't showing HDD on boot timing. Due to some corruption, my previous HDD is not working.. Did i have to update any HDD Driver.. if yes, so how could to i update on BIOS..???
View 1 Replies
View Related
Feb 8, 2013
My two weeks old dell inspiron 17R doesn't boot into the OS (Windows 8).
By hardware diag. passed the test, found nothing.
View 1 Replies
View Related
Dec 13, 2014
I have recently bought a Flex 2 15 and want to instal Win 7. I created a bootable Win 7 usb stick with the tool from Microsoft and it works just fine. The problem is, no matter what I change in Bios or Boot manager, The laptop doesn't boot from usb. All I get is the normal Win 8.1 installation.
View 1 Replies
View Related
Jan 2, 2010
I'm a owner of a HP Mini 5101. It has a function to press F11 to return the system into the "out-of-the-box" state. But my problem starts here. When I press F11 I imediately get a screen that says Windows Boot manager on top and and error : 0xc000000e and required device is inaccessible.
Â
This started after I made a "clean" install with the DVD Windows 7 that came with the computer as I tried to avoid all the "crapware" that comes included with the new notebook.
Â
If I boot into Windows, the HP_RECOVERY partition is visible and the HP recovery image is on it.
Â
Is there anyway to get the F11 recovery back to working state?
View 9 Replies
View Related
Nov 16, 2014
Basically I have tried these:
Discharge laptop: No result
Use different wall outlet charger: No result
Swap RAM: No result
Use PSA: No lights and display
Use battery status: No lights even not plugged in!
View 1 Replies
View Related
Feb 26, 2010
I'm trying to fix my fathers laptop so he won't have to spend money on a new one. Here's the problem:
When I press the power button to boot the laptop it does not boot, it just flashes the power light(s) on and off at maybe 1 flash per second. I've tried removing the RAM-sticks one and one, removing the HDD, removing the battery and removing the DVD reader (not all at the same time, of course). None of those helped, it still did the same thing.
Then I tried to blind flash the bios from a CD, the laptop comes on with the fan at full blast, the DVD reader comes on and it stays on, but it never finishes and powers off.
View 6 Replies
View Related
