if you're having problems with the speakers on the dm3. I want you to go to hp's website and update the "bios" its very easy to update it. Just type in the model of you're dm3 and click on drivers, and then click on the correct operating system you have.
Make sure you specify if its 32 bit or 64 bit. Then click on the bios update half way down the page and update it. Then I want you to shut down you're dm3 completely. Once its shut down turn it back on and start hitting the "f-10" key on top of you're keyboard.
Keep hitting it until you see it enter a page that is all text, the bios page. This page will not look like a normal page that you're used to and your mouse will not be active. if it asks you to exit say no. Once you are on this page start to hit any of the letter
keys(example- hyfwgsldi, anyone) to produce a beeping sound from your laptop. Now, Pick up your laptop and place the speaker very close to you're ear and listen very carefully if sound is coming out of both sides. There should be sound coming from the left and the right side of the speakers. Now if there is sound only coming from the left side then I have confirmed with a hp level 2 tech that its a hardware problem. This is what is wrong with mine. Either the factory forgot to connect the wires the right side for the speakers or the speaker company messed something up. At this point no software or driver will fix the problem and you need to send you're dm3 in for service or exchange it for another one. Please trust me on this as I spent close to 30 hours and 7 days on the phone with HP.
The right speaker in my notebook is louder then the left one is. The only way to compensate for the problem is to lower the "balance" in the sound properties for the right speaker (I have it all the way down to 70 if you can believe that!) Now my audio sounds even between the left and right speaker. I think it's ashame that seems to be the only fix for the problem. Not sure if this is a driver issue or a hardware issue.
NVidia installs audio drivers to the computer when installing the video drivers (which I still don't understand why...I thought NVidia was a graphics company?) Then I install the IDT drivers/software afterwards. HP has verified that this is correct so everything on my end is up to date...minus of course offical drivers for the 320M video card that everyone is still waiting on!
I've been listening to a bunch of podcasts on my laptop lately and realized that the right hand side speaker is MUCH louder than my than the left speaker, in fact if I lower the balance on the right speaker to 0% and left to 100% it's not half as loud as the right at 100%. Is this normal? If not is there a fix for this?
Also when typing, if I press the Caps lock key too fast the cursor disappears and my typing is interrupted anyone know is up with that?
I have not been able to use my webcam to talk to friends through ooVoo. I was going to post in the ooVoo forums, but someone with my same problem posted earlier this week and there was no response. When I connect and am in a call, my video and audio do not show up, and I am not able to hear my friends but I can see them. I tested to see if the Video function works on Facebook, and the audio and video worked without any problems. Device Manager does not show any errors.
I just got an HP Pavillion dv9000 laptop a few days ago and everything is great, except for this static noise coming from the speaker. It kind of sounds like when you have your TV on a blank screen, but you have the volume as high as it goes. Every now and then there's a little pop or crack sound too. Some important things to note:
- It was a refurb
- The noise immediately stops when the volume is muted
- All drivers are up to date
- If I go into the volume settings, I can slide the volume all the way over to the right side, and the noise stops, but any amount of volume going through the left side and the noise is back
- The noise is the same at any volume level
- If I plug in headphones, there is no noise through the headphones, it only happens on the speakers
At first I thought it wasn't anything big, just a driver update or just a matter of breaking the laptop in, but now after a few days it's starting to get annoying. I don't want to leave the sound on mute all the time, and even when I am listening to audio I can still hear this noise.
My HP DV2000 yesterday started making a mind-numbingly loud buzzing noise (I have been using earplugs) as soon as it was turned on. From my research, the best I can tell is that it's being caused by a loose or faulty speaker cable. I've tried all of the obvious software fixes (drivers, system restore, muting, etc.) and nothing affects the noise. If I pull out the power cable, the pitch lowers, which I assume is because of the reduced power coming from the battery versus the power cable.
I have a reasonable amount of mechanical aptitude and have performed a number of hardware repairs on desktop computers. Does anyone know if detaching the speaker cable (if that's the solution) would be a simple enough thing to do, or should I just not even try, and take it to a professional? I've looked at the maintenance and repair manual, and it does look like a fair amount of work...
I recently purchased a new dv7t-3000. I replaced the internal hard drive with an Intel X-25M 160GB SSD and re-installed Windows 7.
I'm writing because I'm hearing an annoying noise coming from the subwoofer. It sounds like induced RF noise. I hear the noise regardless of whether the speakers are muted or not. I've also disabled or muted all the audio recording devices, but no change.
It basically sounds like radio frequency noise, probably induced from some other component in the laptop whose leads run close to or over the speaker wire for the subwoofer.
I have a HP Pavillion TX2110US Laptop and I have started to get some loud clicking noises from the speakers when the screen is at certain angles. I don't find these laptop speakers to be thrilling so I wouldn't mind losing/disconnecting them. And I know it's not windows making the racket because I uninstalled the sound card and it still did it, and I also tried it at every percentage volume too, but to no avail.
I took off the battery and disconnected the big plug underneath the little cover that's under the battery (I think it's called the "display assembly connector" or something like that) and I got the noise to stop. The problem is that I don't want to lose the built in microphone, fingerprint reader and any other functionality that the rest of the non-speaker wires do.
So my question is, which wires go to the speakers (preferably the right speaker since it seems to be the culprit) so I could cut those and leave the rest of the plug intact?
I counted 16 wires and I know that all the speakers that I'm familiar with have 2 wires per speaker minimum and I know that it won't work with out both so ideally I would just want to cut 1 wire to the right speaker. So does anyone have a wiring diagram or could explain which wires go to which speaker?
On my HP DV5-1015TX I notice that there are 2 audio out jacks in the front.
However my speakers have only connector that I plug into either one of these. This works but I am am wondering if there would be any loss of audio quality when used this way (maybe surrond sound or something)? OR is the second audio-out an extra connection to say headphones?
I just recently picked up my new DV7, wiped the drive and re-installed Vista Ultimate x64. The machine itself runs great, but after installing all the drivers and the most recent bios, I hit a strange snag- I have my right channel speaker, works fine. But my left channel isn't coming out the left speaker, but out through the subwoofer. I've tried uninstalling the IDT codec and letting Vista use it's own driver, same deal. Re-installed IDT, same deal. I get no sound at all through the left speaker, and Vista only recognizes me as having 2 speakers.
I just got my HDX16, and was updating it through the HP Update program, and it only had two updates for me and both seemed not to be very important, so I was wondering about updating the BIOS and the different hardware drivers, is this done through HP Update or do I have to go on their website and download them from the site? Also is there a way I can see what version driver I have currently installed?
I have had plans to upgrade for over a year now and it is slowly starting to pan out. Below are the original relevant specs of the notebook when purchased and I do have quite an extensive plan for the upgrade of this great machine.
- Intel Core Duo processor T2400 (1.83-GHz, 667-MHz FSB, 2-MB L2 cache) - 17.0-inch WSXGA+ wide viewing angle BrightView display with 1680 x 1050 resolution and 16M colors - 1GB (1x1GB) 533-MHz DDR2 SDRAM - ATI Mobility Radeon X1600 graphics controller with 256 MB of discrete video memory - 100GB 5400RPM Hard Disk Drive (Hitachi) - 8-cell high capacity Lithium-Ion (68Wh) - 90W AC power adapter
These specs are a bit outdated for today's standards but I hope to bring out the potential that this motherboard can support............
I installed the update for IDT HD Audio (it prompted me to in windows update) and I have been disappointed.
My most important problem: The audio sounds fine though the built-in speakers, however the sound though my headphones (provided by the Independent Dual Headphones profile) is inexcusably quiet. At max volume, it is only at comfortable listening levels.On the other hand, I am glad that it finally switches profiles automatically when I plug in a device via mini-jack.The second issue is the "SRS Premium" feature not working properly: I bought my laptop before they started doing that whole thing, so mine does not have an SRS badge by the speakers like others I have seen, but the update gave me the feature so I just expected that it would work. Thing is, the sliders are all messed up, I can't get it to stay at the percentage that I set it at (screen/app refreshes reset the sliders back to 0%). And even at that, if I manage to get a slider up to 80% whatever, it makes no difference in sound. I tried changing songs in case it wasn't real-time updating but that didn't work either.
I have an HP Pavilion dv7. 4gig ram and an Radeon HD 3200 yes not the best video card in the world but with my laptop I can play games like Stalker, oblivion and the witcher at high settings.
Now my drivers are all out of date but when ever I go to the radeon sites to find a download for an updated video drivers all these different sites just have me download tihs application that find all outdated drivers for you. However in order to have them download the new drivers you have to pay them for the program.
I can not figure out how to get the latest drivers for my laptop.
Any one BIOS update known to be better than the rest?
I am reading a good deal on the boards, and people like F.16, but I don't know which would work best in my situation. My main issue is being able to see the 3.12 GB of RAM after I put 2 2GB sticks in.
I have XP MCE , T7200 which came with the DV6000T bought in Jan 07.
I just want it to run cooler and faster, so far it has been a workhorse.
it looks like Synaptics has added gesture support for their touchpads with just a software update. [url] The website says the software is backwards compatible with computers purchased in the last year or so. I just got my HDX18t a week ago and can't seem to get it to work.
While installing and 'expanding files', the disk tray popped open at 21%. I pushed it back in, waited an hour, and it never went past 21% (Though the HDD light was chugging along like it was doing something). I restarted and now I'm waiting to roll back to Vista and start over. Anyone else have a similar issue on a Dv3?
Update: I ran the disk again after rolling back and it gave me the same problem. An error message pops up after it says "Windows needs to be restarted". That message is one of those 0.5second messages you can't really read, then the tray pops open, and windows restarts.
HP has posted a BIOS update on their website for the DV6-2190US laptop. The update is listed as F.1AA and claims to "improve system fan behavior". This laptop has a quad core I7, 720 QM clarksfield processor so anything to better control heat would be good to consider. I am usually never hesitiant to update a BIOS, even on the numerous laptops I have owned, but....I have noticed HP had some of their BIOS updates bricking their laptop lately.
Has anyone flashed their DV6-2190 with this update yet?
Has HP posted any information on upgrading to Vista SP2? When Vista SP1 came out HP posted some good info including precautions to take and an FAQ about drivers etc. Now that Vista SP2 is available I was hoping to see something similar.
I have a weird behavior of my brand new HP HDX18 (running Windows Vista 64 bit).
The Laptop does not play BluRay DVDs any more. It only worked two times. I can access the BluRay file system so I assume that the BluRay drive is working. Then trying to watch the movie with either HP MediaSmart or Windows Media Center, both programs hang and need to be stopped via Task Manager.
HP support recommended a video driver update - but...
When I try to install the recommended update of the display driver from the HP HDX18 support site, it installs and the laptop remains working (I hear sounds when receiving new emails or when wiping my finger on the finger print sensor), but the result is simply a black screen. Same thing when using the nvidia beta drivers for notebook chips.
I tried to first switch to Standard VGA, then removing the old nvidia package, then installing the new driver. Same result: A black screen.
All I can do is doing a system recovery to get a working display again.
I did the BIOS update that I downloaded from the HP site as well. I currently have the Spyder software for screen calibration running.
HP support also recommended a "hard reset" of my windows installation, but since I just finished the complete installation of all programs I need, this is not what I really want.
I purchased an HP G70T directly from hp.com for my husband. I forgot to add the dedicated NVIDIA 256mb graphic card to my order. He's has the notebook for about a week now, and we're looking to see about getting the graphic card added to the notebook. I have contacted hp.com, but I'm getting conflicting answers. One technical support person emailed to say that a graphic card cannot be added after purchase. Another emailed me the link to the HP Parts Store, saying that I could purchase the graphic card there.
So, which is it? Can a dedicated graphic card be added to the HP G70T? Or would I have to send the laptop back as a return/exchange in order to get a G70T *with* the dedicated graphic card?
Hp update popped up on my DV5t-1000 and asked me if I want to update the bios version. I downloaded it, but while the installation an error occurred and it dumped all the memory to the hard drive. After a restart, it does not even show the hp logo only a black screen. All the led lights are on not blinking.
I have problem with dv9700t and bios F.59A. After upgrade bios from F.58 to F.59A and reboot, notebook won't start - there is only beep: first beep is long and other two are short. For me this sound show that is problem with graphic card. But from years notebook work fine and i don't use it to play games (only for office work).
