Has HP posted any information on upgrading to Vista SP2? When Vista SP1 came out HP posted some good info including precautions to take and an FAQ about drivers etc. Now that Vista SP2 is available I was hoping to see something similar.
View 8 Replies
I have a HP Pavilion dv4t-1000 CTO Entertainment Notebook PC and after updating my bios from F.22 to F.24 the computer wont boot into Vista. It was completed successfully using the winflash, but the computer restarted it just stays at a black screen, and wont go any further. (I hope bios is not corrupted.)
The computer is on but its not booting the operating system.
Is there any way I can revert to the old bios?
Also is there any key combination that can get it to load BIOS from a USB flash drive?
Windows (Vista) Updates shows this update for my Compaq Presario F572US notebook PC: "nVidia - Display - NVIDIA GeForce Go 6100". The size of the download is 64.3MB.
I visited nVidia's website to see whether they had an update; they had none. So, I'm wondering whether I should get this update suggested by Windows Update or ignore it.
I got my Z890 the other day, and I have now started to reformat the thing and get it cleaned up. I've been following Sigma957's guide, and when I try to install the Sony Shared media thing I get the error, "This update can only be run in Windows Vista". What's up with this?
View 6 Replies View RelatedInstalled works great on my SXPS 16.
http://support.microsoft.com/kb/971644
After i updated to the new vista BIOS 3c25. my ferrari 3400 cannot wake up from standby. the screen is blank...no Hard drive light blinks..looks like the system got hanged.i have to force the power button to power down the system and restart it again.There is no other issues other than this standby thingy..
View 4 Replies View RelatedI have an AR-VGN370. After many months of waiting Vista Service Pack 1 finally is offered via Windows Update. I have assumed it was the Sigmatel driver that had prevented me from receivng SP 1. Is there anyone else for whom SP1 has recently become available and installed successfully? I am very hestitant to allow the install.
View 4 Replies View RelatedRecently my brand new studio 17 updated, about a week later I noticed that 50GB had gone missing! I of course called tech support to see if they could help (good luck) after spending hours on the phone they could not really solve the issue, asides from doing a factory reset.
Now again I am having this issue again, once Vista updated it is slowly eating away hard drive space. There is currently 31.4GB being used (yes, this includes all hidden files) on a 450GB hard drive, yet the system reports only 402 GB free space. Each day it decreases about 2-4 GBs ......
I have an ACER Aspire 5670. Recently i installed windows vista business.
From the day i installed vista my battery appears to be broken.
Ok let's say battery cells were destroyed (Fedora installed on the same system report that battery may be dammaged)-So it may be destroyed in a couple of hours.
The second weird thing is that it persists not to recognize one device. In the device manager it has a hardware ID: ACPISMCB000
Third weird story. Today my notebook prompted that there was SP1 update available. I installed it (in 3 phases - 2together at shutdown and 1 after restart)
After SP update my keyboard stopped working - same thing with touchpad. I uninstalled SP1, uninstalled synaptics driver and re-installed it - same thing.
In a forum somewhere i read that battery causes these problems. I took battery off and now i am writing this message from my notebook's keybord ... touchpad still dead...
both keyboard and touchpad work perfectly in Fedora 9 and that usb mouse/keyboard work perfect too in Vista.
I have a serious dillemma , I'm trying to install Windows 7 - 64 Bit on my 32-bit vista laptop.
I have a sony vaio fz290.
I burned the image of a 7077 build I downloaded from demonoid. Booted off of it and clicked install , and then I got an error about not having a Cd/Dvd drive device driver missing , I tried a lot of things and searched all over the internet.
A few things to ask as I'm desperate
What can I do to make this work ?
Do I have to format my comp for this to work or can I just update over the 32-bit installation
OR can I just install on a partition ?
Simply put I went to update the bios on my notebook as I have previously without incident. Well this time the update downloaded, installed and powered down Windows Vista 64bit SP1. After that nothing! The power lights come on but that is it. No HP Screen, No MSFT Screen no nothing. I honestly think this is a bios update caused by HP's own update.
This is the update I installed: [URL] ...
Relatively soon after a Windows Update (Vista), my screen blacked out and the resolution changed from 1920x1200 to something like 800x600. After restarting the notebook, everything seemed to be back to normal, except my graphics card (GeForce 8800M GTX x 2) wasn't working, and upon looking in the device manager, it said the device wasn't working (code 43).
So, I tried uninstalling drivers/reinstalling drivers, etc. and nothing seemed to work. And now something I've done has made the main VGA drivers or whatever not work, and all I see is a big black screen on startup (but the mouse icon is on the screen and can move around).
if you're having problems with the speakers on the dm3. I want you to go to hp's website and update the "bios" its very easy to update it. Just type in the model of you're dm3 and click on drivers, and then click on the correct operating system you have.
Make sure you specify if its 32 bit or 64 bit. Then click on the bios update half way down the page and update it. Then I want you to shut down you're dm3 completely. Once its shut down turn it back on and start hitting the "f-10" key on top of you're keyboard.
Keep hitting it until you see it enter a page that is all text, the bios page. This page will not look like a normal page that you're used to and your mouse will not be active. if it asks you to exit say no. Once you are on this page start to hit any of the letter
keys(example- hyfwgsldi, anyone) to produce a beeping sound from your laptop. Now, Pick up your laptop and place the speaker very close to you're ear and listen very carefully if sound is coming out of both sides. There should be sound coming from the left and the right side of the speakers. Now if there is sound only coming from the left side then I have confirmed with a hp level 2 tech that its a hardware problem. This is what is wrong with mine. Either the factory forgot to connect the wires the right side for the speakers or the speaker company messed something up. At this point no software or driver will fix the problem and you need to send you're dm3 in for service or exchange it for another one. Please trust me on this as I spent close to 30 hours and 7 days on the phone with HP.
I just got my HDX16, and was updating it through the HP Update program, and it only had two updates for me and both seemed not to be very important, so I was wondering about updating the BIOS and the different hardware drivers, is this done through HP Update or do I have to go on their website and download them from the site? Also is there a way I can see what version driver I have currently installed?
View 4 Replies View RelatedDoes anyone try to update his BIOS to F.2D version?
Is it safe to update from windows since it is winflash?
I have had plans to upgrade for over a year now and it is slowly starting to pan out. Below are the original relevant specs of the notebook when purchased and I do have quite an extensive plan for the upgrade of this great machine.
- Intel Core Duo processor T2400 (1.83-GHz, 667-MHz FSB, 2-MB L2 cache)
- 17.0-inch WSXGA+ wide viewing angle BrightView display with 1680 x 1050 resolution and 16M colors
- 1GB (1x1GB) 533-MHz DDR2 SDRAM
- ATI Mobility Radeon X1600 graphics controller with 256 MB of discrete video memory
- 100GB 5400RPM Hard Disk Drive (Hitachi)
- 8-cell high capacity Lithium-Ion (68Wh)
- 90W AC power adapter
These specs are a bit outdated for today's standards but I hope to bring out the potential that this motherboard can support............
I installed the update for IDT HD Audio (it prompted me to in windows update) and I have been disappointed.
My most important problem: The audio sounds fine though the built-in speakers, however the sound though my headphones (provided by the Independent Dual Headphones profile) is inexcusably quiet. At max volume, it is only at comfortable listening levels.On the other hand, I am glad that it finally switches profiles automatically when I plug in a device via mini-jack.The second issue is the "SRS Premium" feature not working properly: I bought my laptop before they started doing that whole thing, so mine does not have an SRS badge by the speakers like others I have seen, but the update gave me the feature so I just expected that it would work. Thing is, the sliders are all messed up, I can't get it to stay at the percentage that I set it at (screen/app refreshes reset the sliders back to 0%). And even at that, if I manage to get a slider up to 80% whatever, it makes no difference in sound. I tried changing songs in case it wasn't real-time updating but that didn't work either.
I have an HP Pavilion dv7. 4gig ram and an Radeon HD 3200 yes not the best video card in the world but with my laptop I can play games like Stalker, oblivion and the witcher at high settings.
Now my drivers are all out of date but when ever I go to the radeon sites to find a download for an updated video drivers all these different sites just have me download tihs application that find all outdated drivers for you. However in order to have them download the new drivers you have to pay them for the program.
I can not figure out how to get the latest drivers for my laptop.
Any one BIOS update known to be better than the rest?
I am reading a good deal on the boards, and people like F.16, but I don't know which would work best in my situation. My main issue is being able to see the 3.12 GB of RAM after I put 2 2GB sticks in.
I have XP MCE , T7200 which came with the DV6000T bought in Jan 07.
I just want it to run cooler and faster, so far it has been a workhorse.
Which would be the best choice? [url]
it looks like Synaptics has added gesture support for their touchpads with just a software update. [url] The website says the software is backwards compatible with computers purchased in the last year or so. I just got my HDX18t a week ago and can't seem to get it to work.
View 10 Replies View RelatedGot my update disk today.
While installing and 'expanding files', the disk tray popped open at 21%. I pushed it back in, waited an hour, and it never went past 21% (Though the HDD light was chugging along like it was doing something). I restarted and now I'm waiting to roll back to Vista and start over. Anyone else have a similar issue on a Dv3?
Update: I ran the disk again after rolling back and it gave me the same problem. An error message pops up after it says "Windows needs to be restarted". That message is one of those 0.5second messages you can't really read, then the tray pops open, and windows restarts.
HP has posted a BIOS update on their website for the DV6-2190US laptop. The update is listed as F.1AA and claims to "improve system fan behavior". This laptop has a quad core I7, 720 QM clarksfield processor so anything to better control heat would be good to consider. I am usually never hesitiant to update a BIOS, even on the numerous laptops I have owned, but....I have noticed HP had some of their BIOS updates bricking their laptop lately.
Has anyone flashed their DV6-2190 with this update yet?
I have a weird behavior of my brand new HP HDX18 (running Windows Vista 64 bit).
The Laptop does not play BluRay DVDs any more. It only worked two times. I can access the BluRay file system so I assume that the BluRay drive is working. Then trying to watch the movie with either HP MediaSmart or Windows Media Center, both programs hang and need to be stopped via Task Manager.
HP support recommended a video driver update - but...
When I try to install the recommended update of the display driver from the HP HDX18 support site, it installs and the laptop remains working (I hear sounds when receiving new emails or when wiping my finger on the finger print sensor), but the result is simply a black screen. Same thing when using the nvidia beta drivers for notebook chips.
I tried to first switch to Standard VGA, then removing the old nvidia package, then installing the new driver. Same result: A black screen.
All I can do is doing a system recovery to get a working display again.
I did the BIOS update that I downloaded from the HP site as well. I currently have the Spyder software for screen calibration running.
HP support also recommended a "hard reset" of my windows installation, but since I just finished the complete installation of all programs I need, this is not what I really want.
I purchased an HP G70T directly from hp.com for my husband. I forgot to add the dedicated NVIDIA 256mb graphic card to my order. He's has the notebook for about a week now, and we're looking to see about getting the graphic card added to the notebook. I have contacted hp.com, but I'm getting conflicting answers. One technical support person emailed to say that a graphic card cannot be added after purchase. Another emailed me the link to the HP Parts Store, saying that I could purchase the graphic card there.
So, which is it? Can a dedicated graphic card be added to the HP G70T? Or would I have to send the laptop back as a return/exchange in order to get a G70T *with* the dedicated graphic card?
Hp update popped up on my DV5t-1000 and asked me if I want to update the bios version. I downloaded it, but while the installation an error occurred and it dumped all the memory to the hard drive. After a restart, it does not even show the hp logo only a black screen. All the led lights are on not blinking.
View 10 Replies View RelatedI thought it was a good idea to update my BIOS from F0.A to F17.
I am now stuck with the fan constant running and I have checked some other threads and found that you can switch this off in the BIOS.
I have checked and it is already switched off!
I tried to restore to go back to the old BIOS but it seems I am f****d. Not possible.
Are there tricks to go back to the original firmware.
Are there third party software that can stop the fan turning all the time.
Update Retriever/System Update can't find USB drivers for model 20BH. gmy104ww
View 4 Replies View RelatedThis what I installed to my HPDV4T 1020us
[url]
My computer shutoff and when I turned it back on, the screen stays black.
I was updating my Bios as described on Hp website and now it seem's that my dragon is dead.
Laptop is powered on but nothoing happening at all. Is there any Bios recovery soft or bios recovery mode to try ?
I have problem with dv9700t and bios F.59A. After upgrade bios from F.58 to F.59A and reboot, notebook won't start - there is only beep: first beep is long and other two are short. For me this sound show that is problem with graphic card. But from years notebook work fine and i don't use it to play games (only for office work).
So what can i do to run again my notebook?
