HP/Compaq :: HP HDX16, Processor Stepping Doesn't Work Correctly- Bus Speed Low
Sep 7, 2009
HP HDX16 with P7350. In CPU-Z I see core speed 1595.8 I'm observing and it changes to 1595.9 and then 1596.0 and then 1596.1 and then shoots up to 1995.0 - I have never seen it reach 2.0 and never go down below 1595. When processor speed changes I can here problems with sound while listening to music.
Another thing is the Bus speed, which is fixed at 266.0mhx, isn't it supposed to be 1066?
I got an inspiron 11 on Friday. I started noticing that sometimes the touchscreen wouldn't work correctly. Sometimes It takes a few taps to register a touch, other times it just quits working for a few seconds. This makes it hard to do anything, and makes it completely impossible to play any touchscreen games.
After a couple days, I finally figured out that It was on battery power that I had the problems. When plugged in the touchscreen works perfectly.
I have downloaded all the dell upgrades, and windows upgrades. I've also tried to turn off all the battery saving options I could find. Under power options advanced screen I changed every option to the same for plugged in and on battery. I turned off the option for dells power saving features. In device manager I took away windows ability to put usb hub asleep. There Is probably more I'm forgetting. Basically everywhere I seen a difference between battery and plugged in, i changed.
It passes all the hardware checks, both through dell software, and on the bootup hardware check.
I use this in tablet mode 90% of the time. And returning it to laptop mode to use touchpad/keyboard just isn't acceptable
I will start off with Sorry not sure I am in the right place, but if someone could answer or send me in the right direction, I would greatly appreciate it. I have a Hp HDX16-1375, I am looking at upgrading the processor once my warranty runs out, but I want to make sure I can get a processor before they disappear, I think it will take quad core, but I am not sure, I am looking for a successful processor upgrade and to what speed.
I've just installed Windows 7 Ultimate 64bit on my Vaio Z11MNB. As Google told me there is a problem with the FN + F5/F6 brightness adjust in speed mode.
All Sony software ist installed correctly and in the newest version I found.
As in many threads mentioned I followed the right order. But I still cannot adjust the brightness in speed mode
This thread Problem with Vaio Z Windows 7 brightness lead me to the right graphic drivers I thougt... Okay these drivers[url] are for the ZD790 but this shouldn't matter it's the same 9300GS chipset...
The following sony software is installed: SETTING_UTILITY_SERIES_5.1_5.1.0.11200 SFEP_DRIVER_SONY_8.0_10Q1_O_7_8.0.1.1 SPIC_DRIVER_8.0_09Q3_7_8.0.1.1 SONY_SHARED_LIBRARY_5.5_5.5.0.10160 VAIO_CONTROL_CENTER_4.1_4.1.0.10160 VAIO_EVENT_SERVICE_5.1FH_5.1.0.12010 VAIO_POWER_MANAGEMENT_5.0_5.0.0.11300 VAIO_SMART_NETWORK_3.1_3.1.0.11250
Another smaller problem: From time to time there is a yellow exclamation mark at the SD-Hostcontroller in the device manager. I've googled a lot but there seems to be no other driver than the windows included. VEN_1180&DEV_0822
I've Probook 4540s notebook , I tried installing watchdogs , after restarting windows doesn't start up correctly , a black screen with blinkin cursor and wifi Icon. I'm using safe mode now :/
So I just had Windows 7 reinstalled as my harddrive died. But after the reinstall, Windows 7 only detects my laptops native resolution (recommended resolution) as 1280x800.
I know this laptop has the 1440x900 display, I have coworkers with the same laptop and their display shows the "recommended" is 1440x900, and I know that was the case before I lost my drive and got a new one with a reinstall.
This laptop has the NVIDIA Quadro NVS 160M adapter, and I have the latest driver for this from NVIDIA.
Why does windows think my native resolution is 1280x800. I can use the NVIDIA driver to force it to go to 1440x900, which works. I was just wondering why it is doing this. Is there some inf package that I need from Dell?
Sometimes when I boot up my Dell XPS 12 laptop the keyboard doesn't work correctly. Certain keys don't type letters, sorta like the CTRL key or Windows key is stuck down. I have tried a lot of different things (pressing various keys, checking system logs, check keyboard status, etc.) and the only thing that works is to reboot the laptop. Most of the time this fixes the problem, but it is annoying to have to reboot when this happens. I have upgraded the drivers to the latest versions available on the Dell website.
After turning on the laptop, the CD/DVD drive doesn't work though I push eject button and I can't insert a CD / DVD, but after executing "run test" from Pc checkup / My Dell support center it works ( ejects for inserting CD /DVD ) - The Drive is TSSD corp DVD +-RW SU-208 BB.
I have called Dell technical support for 2 times and even they updated the bois ,.... but still I have the problem.
I have a VGA plug in my Dell Inspiron 1545 and when I plug in the cord it doesnt work. I have another laptop and I used the same cord and it works. So I guess my VGA doesnt work, what do I have to get to replace the VGA in my laptop?
I have a Dell Inspiron N5110 15R. I facing a matter that my processor fan have increase in speed upto 50% then after few seconds, it decreases. This circle goes on. Why is that so?
I bought a ThinkPad X240 recently. On Lenovo's website, it says the max speed is 3.30 GHz. However, in the Windows 8.1 Task Manager, it says the maximum speed is 2.69 GHz. See [URL] ....
Why there is a discrepancy? I also tried running Prime 95 for a little while and noticed that the "Speed" in Task Manager never went above 2.70 GHz. Did I somehow get a weird i7-4600U processor that has a max speed of only 2.7 GHz?
I tried to copy data from one hard drive to another, and a little notice came up saying I would be better using a high speed port. I was cleaning out my closet yesterday, and noticed on my FZ box it says it comes with 3 high speed ports, but only two show in device manager, which are the two on the right side, as the drive I was transferring from was plugged into the one on the left.
I want to change my 9100's CPU to a Northwood...(want to see if it will make it a bit quieter....but which one do I get? There's so many different Core Stepping versions....Does it have to be a 3.0C? or will any work?
I have a dv2550se with windows xp installed. (Before it was vista but i reinstalled it).
However, the DVDRW is not being recognized as DVDRW. When I go to My Computer it says that its a DVD-RAM drive. So basically I can't write anything . I tried uninstalling the driver in device manager but still nothing.
just moved to BD+ and my Power DVD 7.3 can't handle it anymore and I'm getting really frustrated with trying to get my blu rays to work. Cyberlink is a terrible company probably run by like 3 guys. The customer support is awful and I can't get anything to work anymore. I'm begining to think that getting blu ray on laptops was a bad idea. WHo knew they were going to change things on a month to month basis.
Everything works fine except eSATA. I've tested in in Windows Vista 64bit and Windows 7 64bit. Same thing in both - the computer completely freezes up when it'd usually be detecting the drive after plugging in. I'm plugging in an external HDD that works fine on my other computer.
The other computer's using XP so that could make a difference. I'm more suspecting a Dell hardware or drivers issue though. I'd be interested to know if it's a problem everyone has and Dell will maybe fix it in a year or so. They've already released a BIOS update and I've got that; no change.
This is absolutely crazy. The laptop came back to me in worse shape than it was sent off. C drive was wiped, several very large scratches that were not there before, and the CD drive simply does not work. I tried loading in a CD-R at first, and it didn't recognise it, though it might be the CD. Having the CD in at startup actually slowed down the whole boot sequence immsenely.
Since then I've tried it with several different CDs, DVDs, whatever and none of them work. The DVD drive just chugs a long and never gets anywhere.
I can't afford to send this back to be fixed now because 3 weeks was an insane time for me to be without a laptop. How costly/difficult would it be for me to replace the DVD drive myself?
I just bought a Dell XPS 15z and the CD eject button doesn't work. (I pressed function key+eject key on the keyboard as instructed in the manual.)
Tried to update my keyboard drivers from the cd provided but there isn't any keyboard drivers in the cd... CD can be ejected by right clicking on the dvd drive and choose "eject".
I have had the HP 620 laptop for about a year now , Recently upgraded it to windows 8 . So... as soon as i open my laptop , everything is fine and the wifi works and everything is basically normal , but when i use the laptop for like 10 min , the wifi randomly shuts off and tells me that i need to connect via an Ethernet cable, and when i do connect to ethernet cable it works . I am on windows 8.
I bought a Dell Inspiron n5110 but it USB 3.0 is not working for me when i put the mouse or flash-drive in, do i suppose to install a driver to get this work? Any link for a driver? because i was trying to find but didn't work....
I have a problem that my 'up' key doesn't work at all. It's important because I need it to brighten my screen with 'Fn' key. Is it possible to brighten the screen somehow without using 'Fn' key? the 'up' key seems to be not working at all...
I cant open my hp pavillion dv6 laptop...ive set a password before but i dont know why it doesnt work anymore..when i try to open it always says "the user profile service service failed the log on,user profile cannot be loaded"!!I dont know what will i do..im afraid to lose all my files.
Under control panel: mouse properties tab hardware, there is no mouse shown. The same with device manager, there is no mouse listed. Changing mouse settings has no effect. There is still no mouse pointer, even though I can see it move when I hover over icons, I can click, and I can locate the pointer when I press ctrl (radar symbol). As soon as I plug in an external mouse, the mouse point appears, a mouse appears under mouse properties hardware, and I can move the pointer via touch pad also.