HP/Compaq :: OptimizingDV6T Powersaver Settings
Aug 13, 2009To get optimal battery life, what settings do you reccomend changing under the Advanced Power Settings for the Powersaver battery plan?
View 5 RepliesTo get optimal battery life, what settings do you reccomend changing under the Advanced Power Settings for the Powersaver battery plan?
View 5 RepliesVista 32 bit
HP pavilion DV6335CA
we want to put back to factory settings, recovery disk doesn't work so DONT ASK.
I heard there was a 1 or 2 button combination.
we all know the screens on the dv7's with nvidia cards come out of the box looking very washed out. i know the gammas are way too high. does anyone have IDEAL settings which make the screen look it's best? mine seem ok with the tweaks i've done, but the screen still looks so much worse than on my external lcd.
here are my settings:
brightness: 50
digital vibrance: 12
contrast: 57
gamma: 15
i know this is specifically a problem for the nvidia machines, as the dv5 i had for a short time looked fine out of the box with it's intel gma4500.
Does anyone here use the program fan6000 to tweak their HP laptop fan-settings?
I have been looking all over but cant find it, and I use to have it but I must have erased it somehow?
I have a Dv6500 series notebook with C2D 1.5 GHZ processor and Nvdia 8400gs Graphics card.
My notebook came with vista preinstalled which i did'nt like...
so I Installed XP primarily using the guide at this location
www.nogodforme.com
and
Installing Windows XP on the Intel based dvx500t Series
I have installed all the drivers mentioned in the thread and I dont have any "yellow" marks in the device manager...
The problem is With Vista there was a toolbar option that displayed "battery level", "charging status" and allowed to use the following settings
1)Power saver
2)HP recommended
3)High performance.............
I have a HP dv1131 TX laptop.I am not able to access SATA settings in it. I tried with the BIOS....but it doesnn't seem to display any option pertaining to SATA operation.
View 4 Replies View RelatedI'm trying to restore my Compaq CQ56-115DX back to the factory settings. I ordered the recorvery disks from HP. The computer will not read the recovery disk on restart.
View 1 Replies View RelatedHow do I restore my Compaq Presario CQ61 - 415SA back to factory settings. I have been told to press F11 on start up but it won't work. just loads as normal. Have tried F10 too same result.
View 1 Replies View RelatedI have three user profiles in my Compaq Presario CQ-42, one is administrator and others are "Other User". When I fisrt saw the synaptics touch pad settings window through my first "Other User" profile 1, in Mouse Properties->Device Settings->Synaptics LuxPad V7.4->Settings, all the options in this window were available for selection and no one was diabled. Now when I go to "Administrator" Profile, Some of the options in this settings window are disabled and appear to be partly hidden. Like the option "Enable Pinch Zoom in Pinch Zoom section" and "Enable Pivot Rotate in Rotating" appears to be hidden/disabled.
For verifying this, I created the another "Other user" profile 2 but no success and I found the same problem here also. I also tried to unistall the synaptics driver several times from all the profiles but every time I re-installed them and checked to get the same result. The settings were only accessible for "Other User" Profile 1 each time and were disable for Administrator profile and "Other User" Profile 2. I can produce the snaps of same if required.
For my M1710 what's a good setup and resolution to use? I really hate how it never really shows you what your current settings are. IS that a bug? Or is that just me?
If other M1710 user could post up there optimal settings it would be much appreciated. EVerytime I run their optimal settings it sets my resolution to 800 x 600. between 800 x 600 and 1900 by 1200 or whatever there are alot of possibilities so any ideas would be great.
I am trying to detemine whether I have an LED WUXGA screen and i got some good info from jet757f in another thread that said that LED screens have 15 brightness steps and that CCFL have only 7 brightness steps.
listing:
screen resolution:
LED /CCFL:
# of brightness settings:
panel model:
MINE ARE:
screen resolution: 1920 x 1200
LED /CCFL: ?
# of brightness settings: 15
panel model: LGD0135
I'd like to rip one of my region 2 dvd's for backup using Handbrake, but I'm not sure which settings to use?
Should I use anamorphic (strict), or maintain aspect ratio? Or custom, and maintain the 720x576 resolution? I don't want the picture stretched or squished. Please help, I'm really confused on what settings to use.
some solid firewall settings for a MAC? Would be using the native firewall.
Also, what is the best anti-virus (freeware) to use? I'm not looking for debate on how an Apple OS doesn't need it. Just what is the best and most widely used freeware. not familiar with MACs.
Is there a program out there that I can use on leopard to change how much bass/treble comes out of the sound output? Like the graphic equalizer for itunes, but system wide?
The reason why is that my speakers have a subwoofer, but no independent control for the volume of it. On the PC (cough), I could just turn it down with the creative software, but osx doesn't have anything that I can see.
Will I have to get new speakers?....
Just wondering what we use in terms of Power Management, whether its part of the OS or its Dell's Control Point Manager, and whether it affects the fans kicking in or not under comparable settings.
I use an M4400 & an E6400, both have the latest BIOS revisions, and both use Vista's native applet, selected to "Balanced".
I don't use it very much; it's more a backup machine and the occasional Skype to grandkids. Been having a problem with being unable to use windows update; keeps getting an 8007005 error.
Googling reveals a lot of folks with the same problem, some different fixes, and mixed success stories. I've tried several of the fixes with no luck and probably made things worse than they were before (now Defender won't update).....
I'm planning on buying a Dell Studio 15 and upgrade the standard 1280x800 screen to a 1920x1200 one(for games, videos etc).
My concern is, with this display setting, should I find the icons/texts etc be too small for everyday general use, what other resolutions setting are there to choose from?(the 1920 screen) Would 1440x900 be available or does it go straight down to 1280x800? Can any Dell owners confirm this please?
Likewise, if I upgrade the display to 1440x900, I assume 1280x800 will be available as well?
This may not be a question that is specific to my particular notebook, or even to Dell but then again, it might be; I'm not sure.
Previously (that is, before I recently reinstalled Windows) my computer used to have some sort of "memory" for volume settings.
I normally set the volume to around 20 when using headphones and set it to around 100 without headphones.
My computer had a "memory" for this in the sense that whenever I plugged in headphones the volume would automatically set to 20 and when I unplugged them, it would go back up to 100. However, this no longer happens and I don't know why
Whenevr I remove my e5600 from its dock to use the laptop on the go, the touchpad always goes back to its default settings.
I cant figure out why, but im thinking maybe my wireless Logitech mouse/keyboard that I use while docked has something to do with it?
I finally received my E6400 machine.
Later on today I will update the bios to A15.
In the meanwhile I'm looking for the optimal bios settings for best performance.
Following a swap of hard drive between two E4300 (asked by the dell support...), the TPM and encrypting settings have been erased.
In order to retrieve the functionality and access to encrypted files, I did the following:
System restauration at a date before the fatal swapping of hard drive
Bios reset of the tpm and reinstallation of all the tpm software .....
settings I should be using for gaming. Currently i'm using the default settings. It seems to run spore perfectly fine no lag/choppy game play (offline) a little online though and the graphics are smooth and sharp. When I play nhl 09 the gameplay is very erratic and choppy and the graphics are terrible, they start off decent and then just digress completely to box like looking players as if it were played on something a bit better then the n64. I checked the system requirements for nhl 09 the 6920g meets the requirements I even have 4gig ram not 3. Is it something to do with my settings or is the 6920g just not good enough to play it? Would I be better off returning it and try to exchange it for 08 see if that runs better, although ultimately i'd like to keep 09 if possible.
Some notes about my computer:
Not much is installed on it games/ software wise, I only have spore, nhl 09 and nba 2k9 installed, office ultimate 07, and then antivirus software and what ever came with the computer, plus the usual media players, IM, etc. I have 92 gigs free on my first partition, where it is installed. on the other partition is where i keep all my media.
I just upgraded my 5315 to 2 gigs ram. Now I would like to increase my video memory to more than 8 mb. Doesn't seem to be a way to do that.
Now that I have more memory, can I not? use more of it for my graphics. 8 meg isn't much memory
Need to change the touchpad settings on my Dell XPS 14Z, running Windows Professional XP 64.
Online searches to find the touchpad settings have indicated touchpad settings could be accessed in the Control Panel under Mouse options or via an icon in the taskbar.
Unfortunately, none of these appear true. Control Panel>Mouse does not have any touchpad tabs and there is no touchpad icon in my taskbar.
Attempts to find the user manual for this model have also proved fruitless. The link on the Dell site for the XPS 14z directs me to a user manual for a different model laptop (M1330).
I really want a middle click and just more options in general but there seems to be no way. i called up tech support and the guy told me i have a generic mousepad and there was no on other mouse options besides the basic ones in mouse properties.
View 7 Replies View RelatedIn the BIOS on my Latitude D630 there is an option for the CPU to be seen as a single processor or as two processors. The CPU is a T7500 Core 2 Duo 2.2GHz processor.
The BIOS info states that some applications may run faster when it is seen as two processors. Can anyone give me any insight into what these options actually mean in terms of PC performance ?
Also, what types of application would be impacted by the single processor or two processor options ?
I've just bought a used Dell Latitude D830 (UK, XP SP2) and find the touchpad won't scroll. Otherwise pad, trackpoint and buttons all work ok.
I went into Control Panel assuming that the scroll areas weren't set up. Not so - unlike on my old C640, there are no separate Synaptics set-up tabs. Nothing - and it claims there's a Microsoft mouse plugged into PS2 .
Is there anyway to change the dpi / magnification settings in Windows 7 without having to log off and back on or restart the machine?
I'm looking at a Studio 1557 laptop as a desktop replacement with a 1080p (1920 X 1080) screen which I think will make the text and icons quite small.
I can easily change the DPI to 120 (125%) or 144 (150%) and make everything readable which is great however when it's at a desk it's going to be connected to two 20 inch plus monitors and these require the normal 96dpi (100%).
The problem is the machine will be frequently connected and disconnected and having to close and reopen all applications to restart the machine properly is a real pain.
Windows XP used to warn you about having to restart but if you didn't things were still resized. With Win 7 nothing happens until you do.
I just got my new system yesterday, and the screen is mighty bright, with very bright and detailed colors, which seem fake and cartoonish...
It's a beautiful screen, just bright... The colors seem like they are highlighted, and not natural.
Who has the correct setting for this monitor?
i have a m1730 with 2.4 t7700, 8700m GT 256mb sli, 4gb rams, 200gb 7200 rpm raid 0. i used riva tuner and overclocked video card and memory to 750, 1500, 975 and got a score on 3dmarks06 of 93xx-94xx.
is there any way i can reach 10000? or is this pretty much maxed out?