HP DM4-1160us OS/Software :: Windows 7 Reinstall After HDD Crashed
Sep 1, 2014My HDD(HP DM4-1160us) (Product : XH124UA) has been crashed and I don’t have recovery disc with me. How to reinstall windows 7 home on my laptop?
View 7 RepliesMy HDD(HP DM4-1160us) (Product : XH124UA) has been crashed and I don’t have recovery disc with me. How to reinstall windows 7 home on my laptop?
View 7 RepliesI am trying to reinstall Windows 8 on my Inspiron 15Z 5523. I recently got the restore media from Dell with a Windows 8 install disk, but the disk does not have drivers present to access the hard drive/SSD array. Every time I try to install it, it says there is a driver missing.
I originally had tried to restore the system, and I reformatted the hard drive with Dell's utility, but then I ran into a problem because the Dell utility to create recovery media only produced one disk (it did not give me the system image, so I had nothing to restore).
I cannot get Windows 8 reinstalled (nor any other version of Windows) on it. What do I need to do to load the HDD/SDD RAID Drivers on the computer to install Windows?
Dell Inspiron 15 R (N5010) - OS got crashed. Need to reinstall online.
View 1 Replies View RelatedI bought a dv5-1160us ($847) and received one with a bad display (dead pixels) and the one I received as an exchange had the same issue... (both were new in the box w/ all factory seals)... was this a fluke or an issue with the dv5-1160?
View 5 Replies View RelatedI have a Latitude E6410. Hard Drive crashed. Bought a new HD, installed and installed Windows 7 Home Premium. Got no wireless. Looking at Device Function I see no driver for:
Broadcom USH
Network Controller
Unknown Device
What drivers do I need and where to find??
When i bought my laptop it have windows 8 but i disliked it and have many bugs on my games so i installed windows 7
and complete delete everything in my harddisk. I couldn't find product keys anyway packet , laptop etc.
My laptop is pavilion g6 2255eo
i want to uninstall everything that is i want to ununistall the OS VISTA thus replacing it with WINDOWS XP.
But unfornately i have failed to install OS (XP) on my laptop which came with pre-installed Windows Vista. I not been able , but when i boot my lapto using Windows XP CD it copies the required files but when i press ENTER to install Windows XP the message appears that " Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer and that any disk related hardware configuration is correct. This may involve running a manufacture supplied diagnostic or setup program. Setup cannot continue. To quit setup, press F3." Please note I have C: drive installed windows vista on it, i have drive D: files are available for recovery disk pre-installed by the windows vista or manufacturer. My lapto is ACER MODEL 4320. Please advise how to install how to install the operating system on this computer.
My Dell Vostro 3450 (windows 7) had been running slowly for a while and after a virus scan didn't work, I decided to reinstall my operating system. I used the OS reinstall disk that came with the computer and that seemed to work pretty well. However, when it came time to install the drivers, I hit a roadblock. I put in the drivers disk and tried to go through the list of what drivers to install first (DSS, then chipset, etc...) but each time I installed something, it didn't seem to do anything-- I would go through the whole process for each one, but the little check mark wouldn't appear next to it in the "My System" list.... See below:
My computer can't connect to the internet either by ethernet or wifi, and can only input info through the cd drive.
I just recieved my new Studio 17. I noticed that there's a lot of trial software on it that I don't want.
Also, I want to partition the drive.
I know that there's a recovery partition on the HD. If I partition and reinstall, will the recovery partition still be there. Will it still work down the road if I need it?
Also, if I reinstall Windows 7 and the drivers and utilities, will it be the same as what I have now?
I finally fixed all my problems (kinda) I have sound, wireless card, can go stadby hibernate, ethernet device works etc etc, Don't know how I did it because I went to so many different sites and google it thousand times!!!
I've noticed that sometimes you can't get the right drivers from dell even with the service tag number, I got some drivers from dell, but not from my specific model drivers download page!
The only problem I have now is that my hotkey: fn+esc don't work, it doesn't put my computer into standby like it should, the other hotkeys work just fine, Anyone know why? I also would like to get an older version of quickset because the new version that I got now I don't like it, its 7.1.8, I've been looking for the version that came with my computer from the factory but I don't know what version is! I liked that one better.
i'm thinking about selling my Dell Mini 9 and i would like to know how to format my SSD and reinstall Windows XP Home so it is all fresh and new for it's new user
View 8 Replies View RelatedYou know how with Win98 there was a floppy to startup the computer to reinstall the win98 disc.... My new laptop did not come with a start up disc... how is this done? I have no original disc... can this be ordered thru Acer or do I have to purchase a disc from Microsoft?
View 8 Replies View RelatedI want to re install windows 8 by using the oem product key. I am using HP m4-1003TX model. After making bootable pendrive and booting through pendrive the following message appears - "the product key entered does not match any of the windows image available for installation".
View 9 Replies View RelatedI have a hp model 10-e010nr. I would like to do a custom reinstall of windows 8 to get rid of all the junk that slows this machine down...
View 1 Replies View RelatedI am trying to format my C drive and have a fresh installation of the operating system on my Inspiron 1460, which I bought 3 years back. Steps that I am following:
1. Insert Re-installation DVD for Windows 7 Home, provided by Dell
2. Power off machine
3. Power on machine
4. While it is starting press F12, and select CD/DVD and press Enter
5. "press any to key read from cd/dvd" appears, press Enter
6. System boots up
7. Install now button appears, click it
After this it is asking for a driver cd/location to install. I have a driver software cd which is also not recognized.
I have a Pavilion dm4- 1160us. Ever since I upgraded from windows7 to windows8,the fingerprint reader has refused to work. Is ther some driver/software I need to get to make it work with my new windows8?
View 3 Replies View RelatedWindows XP/Vista Reinstall Guide for Dell 17" Laptops
Specifically made for the XPS M1710
Also works for the Inspiron 9400/E1705, 1720, XPS M1730, Precision M90 and M6300, see *NOTE* below
Guide Version 1.20 (Last Updated: 5-20-2008)
I've gotten probably about 15-20 requests on a guide with the drivers I personally use for my XPS M1710 for reinstalling Windows, since I have both an XP-dedicated M1710 and a Vista-dedicated M1710. So... I finally got around to posting it for everyone to see, and it includes some things that some people don't know about... It was originally going to be just what drivers to use, but instead, I morphed it into a full reinstall guide, as there are some things in here alot of people don't know about.
I'm splitting this guide into two parts. The first being for Windows XP, and the second being for Windows Vista. Both are similar in ways, but its better to do it in 2 different sections, to avoid any confusion. I'm not posting a guide for Windows x64, as I unfortunately do not have a copy of it in either XP or Vista form, and most people on the forums don't use it, so this guide is sticking to the 32-Bit versions of the respective OSes.
*NOTE*Inspiron 9400/E1705 - Exchange the Gigabit Ethernet drivers outlined below for the Broadcom 10/100 drivers on the Dell Downloads site for the Inspiron 9400/E1705.
Inspiron 1720 - Exchange the Gigabit Ethernet drivers outlined below for the Broadcom 10/100 drivers on the Dell Downloads site for the Inspiron 1720. Also, exchange the Modem drivers for the one specifically for your laptop. If you have a Webcam, add that software in as the last "driver" installed before moving to the next step.
XPS M1730 - Exchange the Modem drivers for those specifically for the XPS M1730. If you have a Webcam, add that software, along with the "Logitech GamePanel" software, in as the last "driver" installed before moving to the next step.
Precision M90 - Procedure should be the same as that for the XPS M1710, including all drivers.
Precision M6300 - Exchange the Modem drivers for those specifically for the Precision M6300, and also add in the fingerprint reader software (if wanted/needed) as the last "driver" installed before moving to the next step
For the newer (Inspiron 1720, XPS M1730, Precision M6300) model laptops, you MUST DISABLE AHCI (change the setting from AHCI --> ATA) in the BIOS in order to proceed with installation of the Operating System without issues, otherwise the installation WILL FAIL......................
I am reading the various threads about how to go about performing a Windows 7 clean install.
I see and understand the requirements to load the Sony 'platform' drivers to get the various custom hardware working.
but what about reinstalling the original applications? Particularly some of the custom VAIO apps .....
I have acer aspire 6930g lapotop came with preinstalled windows vista ..my problem is this preinstalled windows vista now has to much troubles and I want to reinstall to get red of all these troubles and I heard that I can reinstall it using ((factory default)) DVDs which I made by acer eRecovery program when I bought this laptop but I must tell you that when I bought this laptop ,its hard disk came with only 3 partitions so I used its windows vista tools to create 2 new partitions and now I has 5 partitions so If I used ((factory default )) DVDs to reinstall windows vista ,AM I going to loose new 2 partitons I created and all data in them?
View 6 Replies View RelatedI have this acer aspire 5100 laptop, it came from factory with Windows Xp media center.
Later, i've updated to vista, but now i would like to go back to Xp...
I've heard about this OEM partition that keeps the originalsl files, i was wondering if i could reinstal the original OS from this OEM thing, since i don't have any backup, or recovery cd provided by acer...
I am using an Inspiron 15R SE 7520 which I upgraded to Windows 8 after partitioning my hard drive (two accessible drives c: and d:). The restore partition was left intact.
Due to a software incompatibility I am going to have to restore back to Windows 7, and I hope to use the Dell restore utility.
My question is: If I use the utility will my D drive data (backed up files etc) also be wiped, or will just the C drive be reformatted?
I have a HP Envy 13 1150es Laptop and had to do a full Win7 (64bits) reinstall.
Forgot to do a backup of all the drivers before the reinstall and I once reinstalled Win7, I am now having problems with some drivers.
I have downloaded and installed all drivers for my laptop from this HP website, but still having trouble with one device.
When I go to System Information to check the components, there is one with problems. The ID is:
ACPIhpq00042&daba3ff&2 "Drivers of this device are not installed"
I dont even know what this device is as it does not say anything ("Device unknown")
what devide is this and where can I download the appropiate driver?
Yesterday I launched the recovery manager to re-install an out of the box version of Windows 7.
At 1% of the installation I got the following error Error code: 0xe0ef0003
After this error, I could not start Windows anymore BOOTMGR missing
I tried to press escape and then F11, but once again the process failed
I had also created recovery CD's ( in Total I have 4 ), I try to reinstalled with them by going to F9 and putting the CD to be boot first.
I get the following error "The system recovery media does not support this computer. You are not able to restore this system with the media".
I bought DELL Inspiron 15r N7520 a year back with windows 8 in it, since then I am continuously facing multiple issues , I updated my windows 8 to 8.1 so it was asking for key I searched a lot but never found any sticker on laptop or any CD , I found no way to go back so I tried installing another windows by boot and while doing so I face so many problems at last I went to command prompt diskpart and CLEAN ALL . It removed each and everything I have no way to recover refresh or any other. No option seems to be working for me. And even I don't have dell backup and recovery. If I try to insall windows8 by DVD it gives an error of key doesn't match . Is there any way to install windows without sending my laptop to Dell ?
View 2 Replies View RelatedI've got HP ENVY 6-1250er Sleekbook with Win8-Ru. Unfortunatly HDD died and recovery partition is not accessible any more.
Is there any way I can get ISO image with Win8-Ru (or Win8.1-Ru) for my laptop (with all drivers and HP tools) so I can load them on flash-drive and install?
I found one topic with Win8-En. But I'm not shure if my OEM key will allow to install Eng version of Windows and if I could install Ru-interface.
I have an aspire v3-571g that came pre installed with win 8. The hard drive just crashed without warning, and I somehow lost my recovery media. When I buy a new hard drive, do I need to buy a new copy of windows, or is there another way to get my copy back.?
Also, without access to my computer, is there any good way to figure out which d4ives are compatible with my system?
I had been using my DVD/Bluray drive but after a reinstall of windows 7 I am not able to access the DVD / Bluray drive. or rather I am able to access it after re-installing the driver and then after I take out the disk in the drive again the drive becomes unrecongnizeable
I reinstalled the firmware PLDS DS-6E2SH 12.7 Tray BD-Combo Firmware Update(SE2_CD11.zip ) from Dell support site but this did not work.
The only way I can get it to work is by uninstalling the device, rebooting and when it starts up again, it reinstall the driver and the drive works. A thing to note is that this also does not work every time.
My screen is no longer good so im trying to connect a external display.Been trying for hours trying to get the external display to work of boot.Ive tryed everything changing 2 sets of hd cables and svga cables. The function key. The Laptop does recognize the display but seems to go into powersave mode or something.The only way i can get the external display to work is if i pull the battery and wait a bit then power up the display will work with a notice on the screen that cmos will be reset to defaults then restarts and back to where i was again.Pavilion dm4-1160us.
View 5 Replies View RelatedAfter reinstalling Windows on my mother's 3000 WLMi, everything works as expected, except there is no sound. I have tried installing drivers off the Acer website, and checking all the sound controls, but to no avail.
View 4 Replies View RelatedI just received replacement media to install win 7 on Inspiron N5110. The install is failing with a general Windows install message, restarts computer to complete setup then errors again. I ran the diagnostics again and the memory is getting this error:
Error Code 2000-0123
Validation 55729
Msg: Memory - integrity test discrepancy