I want to re install windows 8 by using the oem product key. I am using HP m4-1003TX model. After making bootable pendrive and booting through pendrive the following message appears - "the product key entered does not match any of the windows image available for installation".
View 9 RepliesYesterday I launched the recovery manager to re-install an out of the box version of Windows 7.
At 1% of the installation I got the following error Error code: 0xe0ef0003
After this error, I could not start Windows anymore BOOTMGR missing
I tried to press escape and then F11, but once again the process failed
I had also created recovery CD's ( in Total I have 4 ), I try to reinstalled with them by going to F9 and putting the CD to be boot first.
I get the following error "The system recovery media does not support this computer. You are not able to restore this system with the media".
I have dv6-3122us HP notebook with windows 7 Home premium preinstalled with Office Starter 2010 Because of all the system problems listed in the troubleshooters I ended up having to restore to factory defaults. It wouldn't install, I was finally able to restore from disc by removing the battery. I don't know what happened but when finally restored the hard drive used 57 GB of my hard drive and doesn't show all the drives on my laptop. It doesn't show a lot of files when pulled up but originally before the restore there was only about 8 GB used. My other problem is that it asks for my Product Key to activate windows and won't recognize the one I have that came with the PC, it says I may have to purchase another key. Also my warranty for the PC is no longer valid. Micorsoft is telling me to contact manufacturer, manufacturer says contact Microsoft.
View 3 Replies View RelatedI was making a Windows 7 recovery disc set, usning the Lenovo Thinkvantage tools, and one of the first pop up windows that came up said "Note: DVD RAM is not supported for Disc 1 of the Product Recovery disc set". Does this meen that I cannot use a DVDs for a Recovery discs? That is all I have.
View 1 Replies View Relatedi just bought a HP 15-d001si laptop and i installed windows 7 (64 bit ) on it . My wirless adapter is qualcomm atheros QCWB335 . i need the link to download the driver for wireless lan and bluetooth .
View 8 Replies View RelatedHP Mini 311-1037NR PC
After confirming my computer has Microsoft 7 [32 bit] installed, after confirming that my computer shows this program updated as of today and that my computer shows Microsoft t as "activated" under Computer/Properties I am still asked for product key and then told I have incorrect #. I have also confirmed I have a microsoft product key and it is not a serial #, model # etc. It is clearly marked.
I have a Microsoft Windows 10 on a trial basis that works OK but not the 7.
I bought a dell inspiron 3520 recently. It has windows 8 installed. When i try to activate Microsoft office, it asks me for product key. My laptop does not have a COA sticked to it and i did not get a MPI card with the package delivered where this info is available.
View 15 Replies View RelatedI've been reading threads and guides (1, 2) on how to format and reinstall, but I have one more question:
My friend owns an Inspiron but lost his recovery DVDs. In order to format his C: and reinstall Windows from the recovery partition, he should hit Ctrl+F11 at Dell logo and follow instrucions to format?
SZ 750 NC.
I wanna create some partition on it ... how can i do that as when i wanna reinstall the recovery on it in the future , the created drives I've made don't change in default factory form ? can I use this software : paragon hard disk manager 2008, if i use this software , will the partition be remained on my laptop when i use recovery DVD ?
A few days ago sony replaced mobo in my BZ model, because there was a problem with onboard GPU chip.
Now I am unable to do a system recovery with my discs that were made from the same laptop before sending it to repair. I also noticed BIOS was upgraded, but I doubt this is the case.
Last month I bought a Lenovo e545. I did an upgrade to windows 8.1 on my new system. After upgrading, I noticed several problems with my drivers and installation of them(Conextant audio driver, Windows location driver). Also none of the Windows 8 games work. So I thought I'd do a sfc /scannow first. There I got the message the system is locked. So I thought to reinstall my backup on the recovery partition. This also said the disk is locked. I tried reInstalling from a home made external USB hard disk with original recovery system, this also won't work. This makes all my recovery disks useless so I can not restore my computer if anything goes wrong...
Now the base of the problem might be influenced by one of these factors:
In trying to solve the problem I accidentally downgraded the BIOS from 1.10 to 1.09 (so maybe this infuences the Windows certificates in the BIOS, maybe a technician can tell me if this can happen) and can not find the 1.10 BIOS on the website to be downloaded and upgrade the BIOS again.I added 4 GB crucial RAM (1600)The Windows 8.1 upgrade is a pain in the ass and blocks the possibility somehow to recover the system. I really need to be able to recover the system to preform a clean system install...
Is that a link because when i copied and pasted to the search on the forum, nothing came up.. What is the exact link.....
View 6 Replies View RelatedI currently installed Ubuntu and it was good but It drained my battery so I decided to take it off. After that my computer started to act weird. The Media Direct partition appeared in next to my OS and Recovery partitions. When i would press the MD button, I would get a blue screen and eventually every time I press the button It just turns on my computer. When I try to turn it back on after putting it on hibernate, it states that windows did not turn off right and it restarts windows. I have decided to a clean reinstall of Vista and MD but I have a few questions. I found this tutorial on how to do it on the internet but i found that i have to completely delete all the partitions including the recovery partition. I was wondering if there is a way to do this without having to delete that partition?
View 10 Replies View RelatedWhen i bought my laptop it have windows 8 but i disliked it and have many bugs on my games so i installed windows 7
and complete delete everything in my harddisk. I couldn't find product keys anyway packet , laptop etc.
My laptop is pavilion g6 2255eo
i want to uninstall everything that is i want to ununistall the OS VISTA thus replacing it with WINDOWS XP.
But unfornately i have failed to install OS (XP) on my laptop which came with pre-installed Windows Vista. I not been able , but when i boot my lapto using Windows XP CD it copies the required files but when i press ENTER to install Windows XP the message appears that " Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer and that any disk related hardware configuration is correct. This may involve running a manufacture supplied diagnostic or setup program. Setup cannot continue. To quit setup, press F3." Please note I have C: drive installed windows vista on it, i have drive D: files are available for recovery disk pre-installed by the windows vista or manufacturer. My lapto is ACER MODEL 4320. Please advise how to install how to install the operating system on this computer.
My Dell Vostro 3450 (windows 7) had been running slowly for a while and after a virus scan didn't work, I decided to reinstall my operating system. I used the OS reinstall disk that came with the computer and that seemed to work pretty well. However, when it came time to install the drivers, I hit a roadblock. I put in the drivers disk and tried to go through the list of what drivers to install first (DSS, then chipset, etc...) but each time I installed something, it didn't seem to do anything-- I would go through the whole process for each one, but the little check mark wouldn't appear next to it in the "My System" list.... See below:
My computer can't connect to the internet either by ethernet or wifi, and can only input info through the cd drive.
I just recieved my new Studio 17. I noticed that there's a lot of trial software on it that I don't want.
Also, I want to partition the drive.
I know that there's a recovery partition on the HD. If I partition and reinstall, will the recovery partition still be there. Will it still work down the road if I need it?
Also, if I reinstall Windows 7 and the drivers and utilities, will it be the same as what I have now?
I finally fixed all my problems (kinda) I have sound, wireless card, can go stadby hibernate, ethernet device works etc etc, Don't know how I did it because I went to so many different sites and google it thousand times!!!
I've noticed that sometimes you can't get the right drivers from dell even with the service tag number, I got some drivers from dell, but not from my specific model drivers download page!
The only problem I have now is that my hotkey: fn+esc don't work, it doesn't put my computer into standby like it should, the other hotkeys work just fine, Anyone know why? I also would like to get an older version of quickset because the new version that I got now I don't like it, its 7.1.8, I've been looking for the version that came with my computer from the factory but I don't know what version is! I liked that one better.
i'm thinking about selling my Dell Mini 9 and i would like to know how to format my SSD and reinstall Windows XP Home so it is all fresh and new for it's new user
View 8 Replies View RelatedYou know how with Win98 there was a floppy to startup the computer to reinstall the win98 disc.... My new laptop did not come with a start up disc... how is this done? I have no original disc... can this be ordered thru Acer or do I have to purchase a disc from Microsoft?
View 8 Replies View RelatedI have a hp model 10-e010nr. I would like to do a custom reinstall of windows 8 to get rid of all the junk that slows this machine down...
View 1 Replies View RelatedI am trying to format my C drive and have a fresh installation of the operating system on my Inspiron 1460, which I bought 3 years back. Steps that I am following:
1. Insert Re-installation DVD for Windows 7 Home, provided by Dell
2. Power off machine
3. Power on machine
4. While it is starting press F12, and select CD/DVD and press Enter
5. "press any to key read from cd/dvd" appears, press Enter
6. System boots up
7. Install now button appears, click it
After this it is asking for a driver cd/location to install. I have a driver software cd which is also not recognized.
My HDD(HP DM4-1160us) (Product : XH124UA) has been crashed and I don’t have recovery disc with me. How to reinstall windows 7 home on my laptop?
View 7 Replies View RelatedWindows XP/Vista Reinstall Guide for Dell 17" Laptops
Specifically made for the XPS M1710
Also works for the Inspiron 9400/E1705, 1720, XPS M1730, Precision M90 and M6300, see *NOTE* below
Guide Version 1.20 (Last Updated: 5-20-2008)
I've gotten probably about 15-20 requests on a guide with the drivers I personally use for my XPS M1710 for reinstalling Windows, since I have both an XP-dedicated M1710 and a Vista-dedicated M1710. So... I finally got around to posting it for everyone to see, and it includes some things that some people don't know about... It was originally going to be just what drivers to use, but instead, I morphed it into a full reinstall guide, as there are some things in here alot of people don't know about.
I'm splitting this guide into two parts. The first being for Windows XP, and the second being for Windows Vista. Both are similar in ways, but its better to do it in 2 different sections, to avoid any confusion. I'm not posting a guide for Windows x64, as I unfortunately do not have a copy of it in either XP or Vista form, and most people on the forums don't use it, so this guide is sticking to the 32-Bit versions of the respective OSes.
*NOTE*Inspiron 9400/E1705 - Exchange the Gigabit Ethernet drivers outlined below for the Broadcom 10/100 drivers on the Dell Downloads site for the Inspiron 9400/E1705.
Inspiron 1720 - Exchange the Gigabit Ethernet drivers outlined below for the Broadcom 10/100 drivers on the Dell Downloads site for the Inspiron 1720. Also, exchange the Modem drivers for the one specifically for your laptop. If you have a Webcam, add that software in as the last "driver" installed before moving to the next step.
XPS M1730 - Exchange the Modem drivers for those specifically for the XPS M1730. If you have a Webcam, add that software, along with the "Logitech GamePanel" software, in as the last "driver" installed before moving to the next step.
Precision M90 - Procedure should be the same as that for the XPS M1710, including all drivers.
Precision M6300 - Exchange the Modem drivers for those specifically for the Precision M6300, and also add in the fingerprint reader software (if wanted/needed) as the last "driver" installed before moving to the next step
For the newer (Inspiron 1720, XPS M1730, Precision M6300) model laptops, you MUST DISABLE AHCI (change the setting from AHCI --> ATA) in the BIOS in order to proceed with installation of the Operating System without issues, otherwise the installation WILL FAIL......................
I am reading the various threads about how to go about performing a Windows 7 clean install.
I see and understand the requirements to load the Sony 'platform' drivers to get the various custom hardware working.
but what about reinstalling the original applications? Particularly some of the custom VAIO apps .....
I have acer aspire 6930g lapotop came with preinstalled windows vista ..my problem is this preinstalled windows vista now has to much troubles and I want to reinstall to get red of all these troubles and I heard that I can reinstall it using ((factory default)) DVDs which I made by acer eRecovery program when I bought this laptop but I must tell you that when I bought this laptop ,its hard disk came with only 3 partitions so I used its windows vista tools to create 2 new partitions and now I has 5 partitions so If I used ((factory default )) DVDs to reinstall windows vista ,AM I going to loose new 2 partitons I created and all data in them?
View 6 Replies View RelatedI have this acer aspire 5100 laptop, it came from factory with Windows Xp media center.
Later, i've updated to vista, but now i would like to go back to Xp...
I've heard about this OEM partition that keeps the originalsl files, i was wondering if i could reinstal the original OS from this OEM thing, since i don't have any backup, or recovery cd provided by acer...
I am using an Inspiron 15R SE 7520 which I upgraded to Windows 8 after partitioning my hard drive (two accessible drives c: and d:). The restore partition was left intact.
Due to a software incompatibility I am going to have to restore back to Windows 7, and I hope to use the Dell restore utility.
My question is: If I use the utility will my D drive data (backed up files etc) also be wiped, or will just the C drive be reformatted?
I have a HP Envy 13 1150es Laptop and had to do a full Win7 (64bits) reinstall.
Forgot to do a backup of all the drivers before the reinstall and I once reinstalled Win7, I am now having problems with some drivers.
I have downloaded and installed all drivers for my laptop from this HP website, but still having trouble with one device.
When I go to System Information to check the components, there is one with problems. The ID is:
ACPIhpq00042&daba3ff&2 "Drivers of this device are not installed"
I dont even know what this device is as it does not say anything ("Device unknown")
what devide is this and where can I download the appropiate driver?
I am trying to reinstall Windows 8 on my Inspiron 15Z 5523. I recently got the restore media from Dell with a Windows 8 install disk, but the disk does not have drivers present to access the hard drive/SSD array. Every time I try to install it, it says there is a driver missing.
I originally had tried to restore the system, and I reformatted the hard drive with Dell's utility, but then I ran into a problem because the Dell utility to create recovery media only produced one disk (it did not give me the system image, so I had nothing to restore).
I cannot get Windows 8 reinstalled (nor any other version of Windows) on it. What do I need to do to load the HDD/SDD RAID Drivers on the computer to install Windows?