HP Display :: Compaq CQ62-219WM Showing Black Screen After Replacing It
Sep 21, 2014
When I replaced my customer's screen on their COmpaq- CQ62-219WM and it showing up black. When I shine a flashlight in it I can see the start menu and whatnot. That means that I need to file a RMA right? I am guessing because the blacklight is out.
I am currently stumped on troubleshooting error code lights for a clients hp compaq cq62. I have tried the hard reset, reseating the memory, and even plugging the notebook directly into the wall instead of a surge protector with the battery removed. I cannot find any solution on the HP site or any other forum site for that matter as to what a solid caps lock light and a solid orange light on the f12 key.
Currently I am thinking the client is might need a new back light for the system or a new cpu.
I have a DELL XPS 15 L521X, (Mid 2012), I have Windows 8 on my machine, Suddenly when I restart my PC a black screen is visible without any error, but system continue beeping. Then I press Power button and shutdown it, after some time when I start it again, its start working normally.
Once system starts its start working without showing any hardware or software problem whenever I shutdown or restart, sometime its start working sometime its continue beeping without showing any error.
Bought this pc at Wal-Mart-mart December 2013 it is a hp 2000 notebook pc with windows 8 when you turn the pc on press keys to enter my user password, and after I enter my password screen goes black except the white arrow moved by the mouse pad will not do anything after that
I have a Compaq Presario CQ60. The Display does not appear to be working. When I turn on the laptop the display remains black. No boot up screen, nothing. I can't go into the bios because I have no screen. The screen remains black. The harddrive appears to be working and all other functions appear to be working but I am not sure because I have no screen.
Is this a known issue with the Compaq Presario CQ60?
I have a Compaq Presario CQ61 Product: VM9496Q2X Model: CQ61-319WM, that has a black screen when I power up. The wifi button stays red and the caps lock flashes twice. I believe this indicates a BIOS corruption failure. I have tried resetting by unplugging and removing the battery, and holding the power button for 30 seconds. I have tried the f8 key and the esc repeatedly at power up. I have also tried pressing the windows and B key along with the power key but nothing worked.
Currently whenever I startup my laptop the display flickers. If windows fully boots or I try to enter one of the startup menus the will flash briefly on the screen and then the display will return to and remain black.
I am able to run an HDMI cable to my TV and it seems to be running fine other than going black with the occasional distorted picture of windows booting.
For the past few months I've had issues with my display on my laptop. At times I would start the computer and it would either go to a black screen and take a very long time to load or I had to restart it to get it to go to the start screen.
last summer I was given a HP Pavillion dv5 that had a little problem with his screen:
The part number of the piece is 484363-001, and it seems it has to be WXGA because of the resolution (1280x800). Is there any problem if it's WSXGA instead?
I was using my HP Pavilion g7 the other day, while gaming and the screen went black for no appairent reason. i haven't down loaded anything recently and i run virus software.
We went to the HP support web site and went through several diagnotics. When the laptop is rebooted the screen on the laptop will flash images of my desk top but once the machine boots up the screen remains blank. you can see the glow from around the edges but that is it. I have another monitor plugged in currently and the system is functioning propertly except for this. We have also done the following, hard reset,Test for memory modual problems, test the hard drive. I was also trying to update the video drivers but the system tells me the drivers are working properly.
I have a dell xps m170 (2 and a half years old) and last 2 days im getting "funky" display problems...
Initially i got a black screen while in windows...nothing to do but reboot. That worked a couple of times...then after rebooting i get a "whiteish" screen that gradually got blacker from outside in..id say it looked like dark storm clouds
I also noticed that the laptop had gotten a lot hotter than normal...this had been gradually happening over time...so much so that i invested in a laptop case / pad to rest it on while working on it..anyways..after reading some threads here i grabbed some monitoring software and logged GPU temps of 70 spiking to 90ish...CPU from 55 to 90's...
Then the funniest thing happened, in order to boot up and avoid the "whiteish" screen and boot into windows i noticed if i attached an external monitor it worked more than if i didnt !! (no idea if this is relevant).
When i did get into windows...it'd look normal for a while, 10 mins or so..then go black (flicker) and id get a diff display res appear (bigger icons n such)..then what i can only describe as red..sometims yello dots, maybe 4 across (width ways ..like bars of them) running the full length of the screen...
Again after reading some threads decided to run the dell diag...That showed me some errors when it did the video test(i think)
Quote:
Error Code : 5300:0119. Detected a failure while writing and reading video memory. Video mode DH (320x200x16) Address A0044h expected to read 0h but read 101010h instead
he above error message was repeated quite a lot with different references to numbers...
Am i screwed ?? Do i have any options at all...Must point out im NOT a gamer at all...so graffix card isnt an issue, if indeed i can replace it?
I have hp g62 after windows start i got a black screen then i restart the pc going in safe mode then disable graphic card then restart pc it's working but the graphic card still disable...
I have had my Hp dv7 notebook for a few months now and have had no problems. But all of a sudden, I turn on the computer and see nothng but a blank, black screen. I do not know if I changed the display settings or what, but I cannot see anything. I know the computer is functioning because the fan turns on and the keyboard lights work. When I connected my laptop to an external monitor, I was able to see that my computer was on and fully functional. In fact, I am using it right now on an external monitor to type this message.
My Pavilion dv9000 screen is black. I know the graphics card is faulty, what are my options to get this replaced. If I purchase and replace the motherboard will I get this same problem later down the road.
I have Hp G42, and recently a problem has created. all the black colour of my screen turn into red colur. i check the driver and update that also. no improvement. startup screen also shows red colour.
I have a HP G72 250US laptop with Windows 7 (64-bit). Laptop has been intermittently stopping. Screen goes black then shuts down tries to restart and sometimes does but screen is black so can’t see what’s on screen. Other times it just shuts down completely. Sometimes screen goes haywire with bizarre horizontal color lines mixed with strange pixelated graphics then goes black.
After restarting in safe mode and ran CCleaner then performed a Hard Reset which seemed to work for the rest of day but next day within an hour screen flashed, went black then came back on again. This time a notice come up but I clicked it thinking to get more info but only made notice go away. It said something about Intel Graphics Accelerator stopped working and had successfully restarted.
I have Intel HD Graphics Driver version 8.15.10.2086 which is what’s listed on HP for correct graphics driver.
My hp pavilion x360 was working fine today inthe morning when I turned it on it all seemed normal I put in the log in password and once I hit enter the screen went black bu the cursor was still showing.
My screen gets black when I start windows 7 on my Hp Paviliom Dm1 Notebook. Also I connected my pc to an external monitor through VGA cable and then I can see the windows operating system in the external monitor . I did a start-up test and then I got these results:
I have a HP G62 B01ET with Windows 7 Home Basic 64 bit and i have been using this computer for about 4 years and suddenly i got the black screen problem when i start my computer and when i disable my video drivers using safe mode i can use the computer on normal mode but it gets really slow and runs on a lower resolution and updating my drivers,bios etc.
I've got a problem with a Compaq C700. When the laptop is powered on the LCD is showing a screwed up image, when I plug an external monitor in the picture is fine on that screen. I purchased a replacement screen, but that shows the same image.
I changed my operating system from WINDOWS 7 ULTIMATE 32 BIT TO WINDOWS 7 ULTIMATE 64 BIT,and the problem is after changing OS my laptop is not displaying Brightness bar. Brightness is increasing and decreasing but it is not showing bright bar.
Any driver i have to install ? if required then driver download link.
It's about my old notebook, hp pavilion dv7 1130el bought 5 years ago, it always wokerd fine but now its screen goes black without reasons... at first I thought it might be overheating, but that's totally random:
-sometimes works even when is hot -sometimes goes blackafter I turn it on and then open google -sometimes works for a while, when its not hot, and then goes black
I don't have a second monitor to connect it, but even if the screen goes black I can still hear the music from youtube, so I guess it's just the screen.
HP Pavilion dv7 1130el, Windows 7 ultimate, runned fine for a year with this OS.
I discovered that my display wasn't turning on yesterday when I tried turning on my notebook. Luckily I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I really cannot be restricted to my living room or office to use my laptop.
I have hp g61 for a while, i have been maintaining really good till recent my screen went BLACK.. it was acting funny before as it stays ON after i turn of the laptop... and now it is all back cant see nothing ... the laptop works fine when i connect to external monitor..
My HP model number 15do11TU, product code F6D42PA#ABG has a black screen with the cursor after I've entered the password. I can open the task manager but when I click switch to to try and get anything open nothing happens. I've tried removing the battery and powering off/on but still nothing ....