My laptop model is HP Envy 6 1178-sai just updated my graphic card (AMD 7670HD series to driver 13.251.0.0) and now the Catalyst Control Centre application is not opening at all, not even an error sign pops upwhat should i do?
View 3 RepliesAfter reading many reviews here, I finally ordered and received my Studio XPS with the RGBLED screen. I felt the reds were a little harsh so I made a few adjustments in Catalyst Control Center that seemed to help.
But I still wanted to make a few more adjustments...So before I got too deep I checked and saw there was an updated driver. So now I updated the driver and it seemed to install okay except now the Catalyst Control Center won't open.
I wanted to update my ATI CCC driver. So I downloaded the latest ccc, uninstalled from from my laptop, restarted, installed latest ccc, restarted. Now when I start windows 7 the little icon doesnt show up in the system tray.
I have an ati mobility radeon 4200 on windows 7 x64.
i have downloaded Catalyst Control Center several times but it is still not working. I have Paviliion dv6-6120se, AMD radeon hd 6490M and built-in intel GPU hd 3000  both GPUs is working fine but the problem started when i uninstalled the Catalyst Control Center in order to get a new updated one from AMD website. But the AMD site said my version of radeon hd 6490M is not supported anyway i have tried everything i uninstalled the ATI GPU driver and install it again. Somehow I downloaded Catalyst Control Center the and the installation finished and the same problem it is still not working. Now i lost the Catalyst Control Center and the switchable graphics config.
View 9 Replies View RelatedMy laptop is dell inspirion 5520 with core i5, 8GB memory and amd radeon HD 7670M. When i bought adm radeon switchable graphic works ok. Yesterday, I update the graphic driver. version is 8.933.3.4 from dell website.
Previous version is 8.933.3.0.
After updating, catalyst control center can't load. So, I roll back previous driver version but the catalyst control center can't load.
I think switchable graphic not work.
I keep getting a message on my laptop: Catalyst control center: host application has stopped working.
Â
This has started happening after I tried to do a BIOS update last week and I ended up with the blue screen of death & had to recover my whole laptop.
This message came with a Microsoft update in about April 2014. I am running:
HP ENVY m6 Notebook PCÂ Â Â
Product Name D5F64PA#ABG
Windows 8.1 64-bitÂ
Intel(R) HD Graphics 4000 and AMD Radeon HD 7600M Series
Sorry to bother folks with this nuisance, however, I updated my ATI Mobility Radeon 4650 drivers via Dell's website to 8.65 and ever since, the Catalyst Control Center refuses to run. I politely click on it, the machine thinks for a while and then, rather rudely, simply ignores my request.
View 5 Replies View Relatedi have a VAIO VGN FS520B,with 760Mb RAM and 80GB harddisk.I Just format my laptop and format the recovery disk as well.
i have download all the drivers for XP PRO and installed them after the XP installation.All went fine bt i cant get the VAIO CONTROL CENTER driver from sony website.I cant use the FN,S1 and S2 buttons.thus
i cant increase/decrease/mute volume,increase/decrease brightness and change external monitor.Actually the brighness is full and the battery drains quickly
I installed Windows 7 64bit on my Vaio FW21L. Does anyone know where I can get Dolby Control Center to install on it?
View 3 Replies View RelatedI am using Windows XP.
I would like to install the catalys control center. I tried to just download the newest driver 9.8 that comes with it but it will always abort, saying there was no driver found that could be installed.
I get this message every time the computor starts.
[The Catalyst Control Centre is not supported by the driver version of your
enabled graphics adapter.Please upgrade your ATI Graphics driver or enable your ATI Adapter using The Displays Manager].
My HP Pavillion 15 Notebook PC (15-n083sa) is reporting that the Catalyst Control Centre has stopped working correctly. I do not understand what this error relates to ....
Â
I'm running win8.1.
Product number: E9M94EA#ABU (If required?)
I've scratched mine up a bit and wouldn't mind ordering a replacement, but I wanted to try successfully removing it first before contacting Dell. I've removed the three screws as outlined in the manual, but it won't budge. Is there a particular way of pushing it out, or maybe I need to be more forceful?
View 10 Replies View RelatedI have an acer Aspire 5733Z and all of a sudden I am having an issue with the ETD Control Center (ETDCtrl.exe) using and average of 50% CPU usage. Â
Â
It's causing my laptop to lockup and go slow.
Â
This just started today and came out of nowhere, I've never had an issue before. Â
Â
Here's the list of recent changes and/or updates I've made.  But they were 3 days ago: Norton Security SuiteJava 7 update 71Acer System Information I can't seem to find anything about this.
Most of the time I use my Envy 15 on my desk and hooked up to an external monitor. In this mode I do not use the laptop screen, so have it set to just display on the external.
However, to turn on the laptop obviously I have to open it up and press the power switch.
What I want to do, is turn it on whilst keeping it closed. I used to be able to do this with my Dell Latitude E6400, as it has an option in the BIOS to turn on automatically when AC is connected. Thus, when I turned it off I would simply unplug power, then to turn it on again would just plug the power back in without having to open lid.
I have looked, and the Envy 15 BIOS is very limited and I don't see a similar option. Is there possibly another solution to get it to turn on when closed?
Why does the volume bar have to take main focus everytime I use it causing it to take me out of full screen games?
Speaking of the volume bar, turning off the touchpad makes it impossible to use any programs until the stupid picture telling you it's turned off goes away.
I have eyes and ears for a reason! I can hear the volume going up and down, and the light on the touchpad is enough to tell me it's off!
Is there anyway to keep the hotkeys but turn off the visual reminders? =.=;;
The Control Zone Touch Pad on my HP ENVY 15 Notebook PC is preventing me from being able to comfortably type.  How do I turn it off?
Â
I prefer my wireless mouse and this is a touch screen... seems overly redundant.
I upgrade my laptop to windows 8.1. But a few drivers were missing after installing those some unknown devices are showing in device manager. Apart from that sound driver works just fine but beats control panel won't open with error shown.Â
Â
The drivers missing are
PCIVEN_10EC&DEV_5227&SUBSYS_1963103C&REV_014&da47f66&0&00E3
PCIVEN_8086&DEV_8C3A&SUBSYS_1963103C&REV_043&11583659&0&B0
ACPIHPQ60073&11583659&0
Â
I have tried everything but couldn't find these.
Â
Product Model is:Â Envy 15-j021tx
I have an HP Envy j011dx that came with Windows 8 Home Edition(64b9t). I put in an SSD and upgraded the ram and installed Win 7 Pro(64bit). Everything is working great except the control keys don't work. When I hit the left ctrl, I get, [9- and the right ctrl, I get, l; I have searched and tried a few different drivers and have looked at some posts about downgrading to 7 and haven't seen anything on this issue. I have ran all windows updates and tried several different drivers. I put the old HD in with W8 and it works so it isn't a hardware issue. I originally looked at this post before doing the downgrade and it gave me the confidence to move forward with putting Win7 on. I have until Friday to take this back to the store if I can't get it working. I have also checked the region/language settings.
View 1 Replies View RelatedJust want every one to tell us the best catalyst version heshe used to their ATI 4670...is it
1- 10.3 From AMD.com
2- 10.3 From strags.com
3- 10.3a review
4- From dell.com
COZ i feel that 10.3 is NOT the best driver
I installed 10.3 since it's release but it was a messy install. I downloaded the notebook version and whenever I choose install nothing happens. There is no option in windows 7 x64 to remove the program ....
View 5 Replies View RelatedThe Catalyst 10.3 beta drivers have been leaked. They support Mobility Radeon cards.
I tried them on my VAIO FW (Win 7 / x64) and they worked (even though Sony asked ATI not to be included in their driver program)
I've updated my drivers through the Dell site from R221539 to R257949 and now suddenly I can't open the Catalyst Control Center.
After installation it said there's a warning in the log, I checked the log and there was nothing wrong there.
1. Download and run Catalyst v10.2 driver - let it extract into C:ATISUPPORT but cancel the installation once the driver is extracted.
2. Run Mobility Modder - browse to the driver in C:ATISupport10-2_xxxx_dd_ccc_wdm_enu - hit modify - wait until driver is modified.
3. Open Device Manager - find your video card or VGA controller - right click and select Update Driver
It’s that time again for the ATI Catalyst™ driver update!
Let’s take a look at what is new this month!
New Windows Features
ATI Catalyst – Video enhancements
* H.264 Level 5.1 support
o ATI Catalyst can now playback 5.1 level streams on all support players
o Allows for playback of high resolutions (4Kx2K)
AMD video transcoding updates
* This release of ATI Catalyst provides enhanced support for the Windows 7 Drag and Drop video converter
o Performance improvements
o New formats supported (H.264 file formats – MTS, WTV, and WMV9 Complex profile interlaced content)
o ATI Catalyst Control Center™ option for enabling/disabling GPU acceleration
* Support for the ATI Video converter is now available in the advanced view of the ATI Catalyst Control Center
New Linux Features
Support for new Linux operating systems
* This release of ATI Catalyst driver for Linux introduces support for the following new operating systems:
o Ubuntu 10.04 early look support
For more information on ATI Catalyst 10.4 (for Windows® 7, Windows Vista®, Windows® XP, and Linux® versions), including all of the resolved issues in this release, please see the ATI Catalyst 10.4 release notes.
Driver Download Link
The first ATI Catalyst 10.3a is out. Lets install it in our ATi enabled laptops and see the improvements here.
Download here
Official Notes:
This ATI Catalyst™ driver update will unlock new performance improvements on top of the already previewed features in the initial Catalyst™ 10.3 Preview driver we sampled you in February. This driver will be available to download on March 17th from undgerground.amd.com and it will be called "Catalyst 10.3a Preview". On March 24th we will post the official Catalyst™ 10.3 WHQL certified on amd.com. The difference between the two is that Catalyst™ 10.3a Preview will contain future Eyefinty 6 updates and an Alien vs. Predator optimization which the Catalyst™ 10.3 WHQL posting does not have.
Gosh! I am so excited
Update:
Direct Download Links:
Desktop 64-Bit version
Notebook 64-Bit version
Update: The desktop direct link doesnt seem to work from the forum but still works from the underground.amd.com and mobility direct link still works.
Update: This is the change log I found so far:
Support for 3D Stereoscopic Glasses.
• Support for ATI Mobility Radeon GPUs (HD2000-HD5000).
• Eyefinity Display Bezel Compensation.
• Eyefinity Per-Display Color Adjust.
• Eyefinity Multiple Display Groups.
• Eyefinity Display Configuration Switching.
• Performance improvement in Aliens vs. Predator.
• Performance improvement in Battleforge.
• Performance improvement in Call of Duty: World at War.
• Performance improvement in Company of Heroes.
• Performance improvement in Crysis.
• Performance improvement in Crysis: Warhead.
• Performance improvement in DiRT 2.
• Performance improvement in Far Cry 2.
• Performance improvement in Left 4 Dead.
• Performance improvement in Left 4 Dead 2.
• Performance improvement in S.T.A.L.K.E.R: Clear Sky.
• Performance improvement in Resident Evil 5.
• Performance improvement in Tom Clancy's HAWX.
• Performance improvement in World in Conflict.
• Numerous Bug Fixes.
The official release notes will release when it will be directly webposted at amd.com.
Benchmark test of 10.3a for 5000 series card: link
Update: Official ATi Catalyst 10.3 Suite Available Now
I have a vague idea that it has something to do with my ATI drivers?
I get the message right after I log in. I can access my desktop and the Internet, but the taskbar with the programs at the top is missing.
When I go to Explorer, my laptop also can't find any of my libraries (documents, pictures, etc.).
Anyone else has experienced a similar problem? It happened yesterday...
I found it on strags.com today......and wanted to share it with all of you .....
View 10 Replies View RelatedDoes anyone have the catalyst 10.3a preview drivers? I didn't back them up but I remember having way better performance(on my sxps 1645) and overclock performance from it ..
View 4 Replies View Related