I wanted to update my ATI CCC driver. So I downloaded the latest ccc, uninstalled from from my laptop, restarted, installed latest ccc, restarted. Now when I start windows 7 the little icon doesnt show up in the system tray.
I have an ati mobility radeon 4200 on windows 7 x64.
After reading many reviews here, I finally ordered and received my Studio XPS with the RGBLED screen. I felt the reds were a little harsh so I made a few adjustments in Catalyst Control Center that seemed to help.
But I still wanted to make a few more adjustments...So before I got too deep I checked and saw there was an updated driver. So now I updated the driver and it seemed to install okay except now the Catalyst Control Center won't open.
My laptop model is HP Envy 6 1178-sai just updated my graphic card (AMD 7670HD series to driver 13.251.0.0) and now the Catalyst Control Centre application is not opening at all, not even an error sign pops upwhat should i do?
View 3 Replies View Relatedi have downloaded Catalyst Control Center several times but it is still not working. I have Paviliion dv6-6120se, AMD radeon hd 6490M and built-in intel GPU hd 3000  both GPUs is working fine but the problem started when i uninstalled the Catalyst Control Center in order to get a new updated one from AMD website. But the AMD site said my version of radeon hd 6490M is not supported anyway i have tried everything i uninstalled the ATI GPU driver and install it again. Somehow I downloaded Catalyst Control Center the and the installation finished and the same problem it is still not working. Now i lost the Catalyst Control Center and the switchable graphics config.
View 9 Replies View RelatedMy laptop is dell inspirion 5520 with core i5, 8GB memory and amd radeon HD 7670M. When i bought adm radeon switchable graphic works ok. Yesterday, I update the graphic driver. version is 8.933.3.4 from dell website.
Previous version is 8.933.3.0.
After updating, catalyst control center can't load. So, I roll back previous driver version but the catalyst control center can't load.
I think switchable graphic not work.
I keep getting a message on my laptop: Catalyst control center: host application has stopped working.
Â
This has started happening after I tried to do a BIOS update last week and I ended up with the blue screen of death & had to recover my whole laptop.
Sorry to bother folks with this nuisance, however, I updated my ATI Mobility Radeon 4650 drivers via Dell's website to 8.65 and ever since, the Catalyst Control Center refuses to run. I politely click on it, the machine thinks for a while and then, rather rudely, simply ignores my request.
View 5 Replies View Relatedi have a VAIO VGN FS520B,with 760Mb RAM and 80GB harddisk.I Just format my laptop and format the recovery disk as well.
i have download all the drivers for XP PRO and installed them after the XP installation.All went fine bt i cant get the VAIO CONTROL CENTER driver from sony website.I cant use the FN,S1 and S2 buttons.thus
i cant increase/decrease/mute volume,increase/decrease brightness and change external monitor.Actually the brighness is full and the battery drains quickly
I installed Windows 7 64bit on my Vaio FW21L. Does anyone know where I can get Dolby Control Center to install on it?
View 3 Replies View RelatedI am using Windows XP.
I would like to install the catalys control center. I tried to just download the newest driver 9.8 that comes with it but it will always abort, saying there was no driver found that could be installed.
I get this message every time the computor starts.
[The Catalyst Control Centre is not supported by the driver version of your
enabled graphics adapter.Please upgrade your ATI Graphics driver or enable your ATI Adapter using The Displays Manager].
My HP Pavillion 15 Notebook PC (15-n083sa) is reporting that the Catalyst Control Centre has stopped working correctly. I do not understand what this error relates to ....
Â
I'm running win8.1.
Product number: E9M94EA#ABU (If required?)
I've scratched mine up a bit and wouldn't mind ordering a replacement, but I wanted to try successfully removing it first before contacting Dell. I've removed the three screws as outlined in the manual, but it won't budge. Is there a particular way of pushing it out, or maybe I need to be more forceful?
View 10 Replies View RelatedThis message came with a Microsoft update in about April 2014. I am running:
HP ENVY m6 Notebook PCÂ Â Â
Product Name D5F64PA#ABG
Windows 8.1 64-bitÂ
Intel(R) HD Graphics 4000 and AMD Radeon HD 7600M Series
I have an acer Aspire 5733Z and all of a sudden I am having an issue with the ETD Control Center (ETDCtrl.exe) using and average of 50% CPU usage. Â
Â
It's causing my laptop to lockup and go slow.
Â
This just started today and came out of nowhere, I've never had an issue before. Â
Â
Here's the list of recent changes and/or updates I've made.  But they were 3 days ago: Norton Security SuiteJava 7 update 71Acer System Information I can't seem to find anything about this.
I just received my new dv6t quad edition. The computer is great except one thing that's driving me crazy is the keyboard. Since there is a numeric keypad on the right side, the keyboard and touchpad are not centered to the screen. I find this to feel very awkward.
Anyone else have this issue with the machine? I know the addition of the keypad is not new to this model.
my HDX 16t via the digital TV tuner. Spectacular picture. But... I had the speakers on my notebook cranked up as high as possible, but still the football game wasn't loud enough and too hard to hear. The speakers are definitely capable of putting out more, as they do with other applications. There's something about Media Center--the volume is just not high enough. how to boost speakers in Media Center?
View 5 Replies View Relatedif I could get Dell Webcam Center for my HP DV5Z-1000. If it is possible, I would like to know how.
View 6 Replies View Relatedhow to control the fan on the HP6930P?
I disabled "fan always on AC" in the bios.
The fan is always on. It doesn't disturb at the lowest level, but it ramps up every 5 mins or so for 2 or 3 seconds. I find that ramping up disturbing and would like to disable it. Considering how cool the air coming out is compared to laptops I have had in the past (Thinkpads and Toshiba) I would say HP is being conservative with their settings.
Is there a program or some bios setting?
I just bought a new dv6 on black friday from staples, the dv6-1334 with a t4300/4gb ram.
Is anyone having trouble inserting their remote control into the slot on the left side of the laptop? My remote won't really fit...i can get it about 90% of the way in, but when i push to click it in/click it out, its like its stuck with sticky goo or something, it goes in really slowly to lock in place and comes out really slowly when i click it out of place.
Other than the media remote control issue, I'm liking this ALOT more than my tx2500 tablet with better cpu and graphics/video card.
I have a DV9000 laptop and I have problem with the fan control and the Heat Sink. The tempeture of the GPU and CPU go very high (GPU 60 and CPU 48), but the fan runs very slow, like if the tempeture is ok and after that the computer stops. As well I want to replace the pads from the heat sink, so I would like to know which types of pads I should use for this computer and where the GPU is located, because there are three chips (the CPU in right side, one in the middle and another in the left side with the nvidia signature). my computer is Intel Duo and the bios is version D.25.
View 4 Replies View RelatedWhy does the volume bar have to take main focus everytime I use it causing it to take me out of full screen games?
Speaking of the volume bar, turning off the touchpad makes it impossible to use any programs until the stupid picture telling you it's turned off goes away.
I have eyes and ears for a reason! I can hear the volume going up and down, and the light on the touchpad is enough to tell me it's off!
Is there anyway to keep the hotkeys but turn off the visual reminders? =.=;;
Is there anything that will fix this? Not having quality volume control.
View 4 Replies View RelatedThe few programs that I know that detect fans won't even show a fan on my laptop, nor does it show on my Friend's G60 (or whatever the silver one is, I don't remember it exactly).
Mines isn't broken or anything,
I bought one of these monsters a couple of months ago. Downgraded (?) it to XP pro sp3 and got everything working except the IR remote control.
View 4 Replies View RelatedWhen I first got my HP DV7-1285dx with Vista (64) the remote control that came with it was working fine. I upgraded to the Windows 7 beta when it came out (I didn't do a clean install) and the remote was still working and kept working throughout the several beta upgrades I did later (to newer beta versions). However when the Windows 7 RC was released earlier this week I decided to do a clean install so I backed up the important drivers and files and did a clean Windows 7 install. After that my HP remote simply stopped working, the laptop won't respond to it at all (not in Media Center and not in anything else). I was able to reinstall all the drivers (from the backup) except for one which shows as "Unknown driver" in Device Manager, and when I do a driver update and point Windows to the folder including my backed up drivers, it does recognize the device as the "HP Mobile Data Protection Sensor" but says it encountered an error installing the driver software since it "couldn't find the file specified."
I don't know if this "Unknown driver" is in anyway connected to the Remote Control problem. I have no other problems showing in device manager by the way.
Also in an unrelated matter, I am trying to reinstall the MediaSmart software the came with the laptop. I downloaded the packages from the HP website but they won't install (since they're only update packages and not standalone installers I guess) so is there any way to reinstall the MediaSmart software from the recovery discs/partition?
Today I got my HP EliteBook 2530p in "FU432EA" configuration. It was important for me to have an optical drive, so i chose the configuration with the 120 GB 1,8" HDD.
The 2530p looks great so far and performs pretty well... If there weren't the extremely annoying noises coming from the notebook.
The HDD with its 5400 rpm (it's a Samsung HS122JF, very slow btw, not really faster than 4200 rpm drives) makes a clearly audible, very high frequency noise and turns on/off every 30-60 seconds resulting in clicking sounds. I can live with that for the moment, because I'll upgrade to some SSD in the near future.
But the second annoyance is the fan inside the laptop. Even when idling in windows with temps below 50 °C the fan turns on every few moments. Unfortunately I haven't been able to control the system fan or even read the actual speed. I tried Notebook Hardware Control, SpeedFan and HWMon, but neither of them reported me anything about the fan. I tried undervolting the CPU with RMClock (which doesn't really support the new Penryn CPUs) and got a few degrees less, but this wasn't enough to keep the fan quiet. In the BIOS there are no options regarding the fan, only some "keep fan always running on AC power", which I disabled.
every time I change the volume it goes into the separate volume popup window and whatever else I'm doing gets minimized if it was fullscreened, it's really annoying. How do I turn this off? I've been told by a HP custom service guy to uninstall Quick Touch, but I can't even find it anywhere.
(are there any other things I can do to optimize this computer?)
I just bought a dv5t yesterday. A question regarding the dual headphones jack...
I have one jack connected to my headphones, and the other connected to my speaker system. I would like to control their volume independently (from the notebook itself).
i have a dv4t that used to come with windows vista. back when it had vista, i heard that the on screen display from hp won't work with 64bit operation system. now i have upgraded to windows 7 64 bit. has anyone gotten on screen display for volume control working for windows 7 64 bit? i couldn't find the driver for the dv4t on the hp website
View 3 Replies View Related