-Can't Switch to AMD 7670 in Win8.1 (but can use Intel HD 4000)
-Tried the HP Drivers listed in the downloads page (even the latest beta Driver 14.6 listed in the AMD page)
Â
Using a HP G6 2230tx
I had hp pavilion 2230 tx laptop which is out of warranty. My laptop doesn't starting .It goes on Automatic Repair and after a minute it starts "Diagonising your PC" which remain for hours and at last "Automatic repair failed" message appears, below it restore option is also available. I proceed to restore but it also fails.Then I shutdown the laptop and open it again and I pressed esc button quickly and then I tried to test the hard drive which doesn't go furthur testing and display "hard drive test fails". Whether my hard disk is crashed or not.
View 9 Replies View RelatedI changed my operating system from WINDOWS 7 ULTIMATE 32 BIT TOÂ WINDOWS 7 ULTIMATE 64 BIT,and the problem is after changing OS my laptop is not displaying Brightness bar. Brightness is increasing and decreasing but it is not showing bright bar.
Â
Any driver i have to install ? if required then driver download link.
I've installed Windows 7 64 bit on my Vaio VGN-FZ340E.
As this notebook comes with Vista Home Premium 32 bit, I had to find the drivers for 64 bit. So far so good, since the Vista 64 bit drivers work fine. (PS: It took some time to get all the drivers). Everything is working except for two things: the S1 button and the Wireless Device Switch.
I want to disable the bluetooth, because I don't use it all the time and it takes a lot of battery when enabled. I used to disable it using this little application from Sony called Wireless Device Switch.
The problem is that this application does not have the bluetooth option anymore.
i have been having an issue that has me perplexed, i recently did a clean install to windows 64 bit, and now i cannot seem to get the intel wirless client to work, it will only let me use the windows wireless client. I downloaded the latest drivers and utilities and software, both from the intel website and the dell site, installed both, but does not allow me to use the intel wireless client. what I am not doing correctly to activate the intel wireless client.
View 9 Replies View RelatedI have VGN-SZ450n.
I've installed
The one control/utility file
The 4 System component files
the 3 wireless files
It recognized the intel wireless from the beginning under hardware however even after installing all those files and rebooting I can't get it to recognize the switch is turned on for the wireless. In smartwi it says they are turned off. Is there a software way of turning them on?
I need to clarify some few simple things about win7 x64 and 4810TG with su9400 and HD4330.
The batterylife sucks. Up to 3 hours maximum.
Seems like the automatic graphic-switch does not work. I play CS:Source with 20fps with everything on low.
HDMI does not work.
Does any else have this feature working under Windows 7?
I have everything functioning (incl. FN brightness and volume controls) in my partitioned install except this.
I have the switch itself set to "Stamina" but neither mode even brings up the little green light beside it. It is completely unresponsive.
I just installed windows 7 on my SR190. The fn volume keys work but my brightness keys don't. Also, the vaio mode switch isn't starting up. something about application failure. Is there a specific order for the driver installation?
View 4 Replies View RelatedMy Lenovo Ideapad Flex laptop does not switch on when I press the power button. It was working till this morning, when I switched it off (via an operating system shut down in Windows 8.1). When I tried to turn it on an hour later, I found that pushing the power button has no effect at all.Â
Â
I tried pushing the novo button. In this case the laptop does turn on and shows the "lenovo" welcome screen for a few seconds. However, it promptly switches off again. The symptoms do not depend on the laptop being connceted to power: they are exactly the same in the two cases.
I am just interested with the update. but it says, "cannot complete the update due to its compressed operating system"... how can we update such a case?
View 1 Replies View RelatedTouch screen not working after reinstalled a win8.1. I deleted the Recovery Partition. So how to fix the touch screen?
View 1 Replies View RelatedOn my new Aspire Switch 10 SW5-012 with  Windows 8.1 I am unable to change the size of the onscreen keyboard. Microsoft refers to Acer support. Is there a solution to that?
View 5 Replies View RelatedOn my new Aspire Switch 10 SW5-012 with  Windows 8.1 I am unable to change the size of the onscreen keyboard. Microsoft cannot answer and refers to Acer support. Is there a solution to that?
View 5 Replies View RelatedI manage to pair my 2-in-1 pc Acer Switch 10 with an externat Bluetooth (bt) device only when the tablet is connected to my home wifi network. As soon as I disconnect from the wifi network, the pairing with the bt device is disabled. If I try to pair the bt device when wifi connection is off, the pairing succeeds just for a few seconds (1 or 2) and then it disconnects.
The support assistance of the bt device, since it actually manages to pair with the pc in such wifi wird conditions, suggested that it probably can be a problem due to the chip of the pc that probably manages both the wifi and the bt connections and is not able to manage them separately.
[URL]
and updating the bt driver downloaded from the ACER Drivers and Manuals webpage. However, the installation procedure were interrupted as the installed bt driver appears to be "later".
I have the issue of backlight not turning on on my NC6400. My guess is that the lid switch is faulty. But I can't figure out where the switch is located.
When I boot up, the screen flashes on for a second before the backlight turns off. With a bright light, I can still see the HP logo during boot up and the computer continue to boot into windows just fine. If I set the lid to the angle in which the computer lid is closed/open (the hdd indicator light changes color), sometimes I could get an instant of backlight.
I think the lid switch is stuck or broken, but I can't find it on the outside. Anyone know where the switch is? I'd also be happy with just letting the screen be on all the time if it comes to that.
has the GPU (9400/9600) on the unibody mac been fixed yet? before, on leopard it requires you to log out; with snow leopard coming out, has that problem been fixed yet?
View 10 Replies View RelatedI want to move my entire system to a Solid State drive.
I have done time machine backups to an external USB HDD.
Can i boot Snow, run disk utility, and restore a time machine backup from the old HDD to a the newly formatted SSD and be cool?
When taking off the hinge cover on my Dell XPS M1210 I found out that besides Power and Media Direct switches there is a third hidden switch labeled SW_CAP.
My question is: Does it serve any purpose?
PS. I started taking my lappie apart due to overheating... sometimes the fan would not turn on...any suggestion? Replace the fan?
I can’t enable hibernation on my laptop. I’ve reinstalled system recently and installed all (at least I hope) drivers.
If I try to enable it in dell quickset feature (tick off the option), after pressing those next, next buttons and returning back to quickset, it’s not enabled again.
If I try it in windows power options, I keep getting message “the file cannot be access because it’s being used by another process”
assuming that the processor on the m1210 is not solder, would it be possible to switch the processor to a quad core? they are the same pin size and i think if i some how i find a better cooling system and bump the power it might work, but maybe this sounds TOO simple to do. i currently have the 2.0ghz t7200 cpu. let me know what you guys think. will the bios recognize and run (also stable)?
View 9 Replies View Relatedassuming that the processor on the m1210 is not solder, would it be possible to switch the processor to a quad core? they are the same pin size and i think if i some how i find a better cooling system and bump the power it might work, but maybe this sounds TOO simple to do. i currently have the 2.0ghz t7200 cpu. let me know what you guys think. will the bios recognize and run (also stable)?
View 9 Replies View RelatedI brought this up 2 years ago and no one could answer but though maybe it worth trying again. If you upgrade Windows SP1 to SP2 or SP3 on Travelmate 630 series you loose the Fn-F5 function.
View 5 Replies View RelatedMy wireless switch on my Z seems to not function.
When I turn it off, I maintain my wireless connection. The light turns off, but my connection maintains.
I have a Sony VGN BX51XP which I have just updated to Windows 7 (not an easy task after the hard drive failed) but I spent several nights trying to sort it and then my mate took about 20mins to solve! But I have the problem of my mouse cursor roaming all over the screen as soon as you rest your arms on the keyboard area. I am happy with using a usb mouse but I was wanting to know how to switch off the touchpad to stop the cursor moving around -
View 10 Replies View RelatedI snapped the ribbon going to the Stamina / Speed switch. Now, i'm always in stamina mode.
is there any way to switch to the speed mode using software?
how I can switch off the monitor only (i.e. the LCD screen only and not the whole comp) on the DV51015TX laptop?
View 5 Replies View Relatedive got a hp nw8440 that needs a switch cover,but talking to hp and spare parts warehouse they no longer make this item,.need cover and led board and led board cable
View 5 Replies View RelatedI am a graphic designer and I a longtime PC user. I am looking to make the switch and since I have a 22" LCD monitor, the macbook is very appealing to me because when at home i can just hook it up to that and also have a very nice portable laptop.
As far as which macbook model to get is where I am having problems I know the entry level aluminum one is the P7350 @2ghz and the high end one is P8600 @ 2.4ghz. Either way I will be most likely upgrading the ram to 4gb but which processor should i go with? I get mixed reviews from apple friends some say I will definitely notice the cpu difference while some say it is only marginal in real world use. MY most intense program will be illustrator/photoshop / multi-tasking.
I've heard of people getting their friends to switch to Mac, even of whole households and families switching.......but apparently my State Legislature has leapt on the Apple bandwagon en masse
View 10 Replies View Related