HP Spectre 15-4010nr OS/Software :: No Commands In Intel Rapid Storage After Resetting Cache Device To Available
Jun 15, 2014
In my HP Spectre XT TouchSmart Ultrabook 15-4010nr notebook there are 1 HDD and 1 SSD (30GB).
The SSD was used for acceleration in Intel Rapid Storage initially.
But I reseted it to Available in Intel Rapid Storage and now I cannot “Enable acceleration” again, because there is no such a command in the program’s interface – it only shows disk information at “Status” and “Manage”, but no commands at all (except Acivate LED).
So this new Intel Rapid Storage supposedly images your Drive onto an external drive... Doesn't this accomplish the same thing as Windows7 backup utility?
I just received a refurbished Inspiron 17R SE with the HD and SSD pre-installed. I want to use the Intel Smart Response feature to speed up the hard disk with my SSD. When I open the Intel Rapid Storage utility I see no accelerator button. How do I enable this feature?
I have the BIOS SATA type set to Smart Response. It arrived with that setting. I don't know of any other setting that could affect this.
I got a T430s with the nvidia nvs 5400m and when i try to update drivers etc via the lenovo system update I got a message that I should update the Intel rapid storage driver to 11.2.0.1006, and that isn't even the latest version, but anyway I mark the update and let it install and then reboot. But when I search for updates I have to update the same driver to the same version I just installed. I have tried to remove the driver via device manager, but without results.
While trying to install Intel Rapid Storage Technology(IRST) Driver on my Lenovo G560 Windows 7 64bit OS it is not able to install and gives me some error regarding hardware not match or etc. error then i came to know that to install AHCI driver i have to change in BIOS Sata controller mode from 'Compatible' to 'AHCI' i tried so and then restart the system but it gives BLUE SCREEN error while windows startup logo and restart again, any solution to use Rapid Storage Technology on G560 and actually this driver was installed when i purchased the new laptop but after certain format and fresh windows installation its no more able to install, how to install it back..........
Had to replace a DVD drive in my Inspiron 15z. Its in shows up in bios but not in my computer. Seems to have something to do with Intel Rapid Storage. When I look at the Rapid Storage Info it shows the dvd in the same area as the SSD that is installed as a cache. Looks like I need to change the port for the dvd...
I'm currently using an HP Spectre XT 13-2201tu Ultrabook (purchased in Indonesia), it came with Windows8 operating system. But due to my company policy, I've to down graded the O/S to Windows7 Professional.
I just realized that one of the PCI-to-PCI Bridge device was not working properly, the PCI device driver not installed.
I've tried to search the driver in HP support and download for Indonesia, but cannot find any Windows7 Drivers.
I am new user of hp laptop. I have an HP Spectre 13 3001el and windows 8.1; my bluetooth no longer exists! I do not see the command to enable the bluetooth settings and the network card on the bluetooth does not even appear in the device manager! I reinstalled hundreds of times the drivers for the card "intel duel band wireless AC 7260" but bluetooth still does not work! I tried to restore the initial configuration of windows but to no avail, bluetooth still does not exist!
My Inspiron 15z was just repaired today (it got a new motherboard due to a different problem that is now fixed). But now, whenever I start up my laptop, I get an error message from Intel Rapid Start Technology Manager that says "Your system does not appear to have Intel Rapid Start Technology enabled." I have never gotten this error message before. It is only now after my motherboard has been replaced. I don't understand what Intel Rapid Start Technology is and if I should have it enabled, and if so how to enable it.
I went and put in an SD card to download pictures... Usually i would get a pop-up that asks me what program do i want to open it with.
I would always use Picasa 3. I don't get that pop up anymore nor can i access anything to open it up with a 3rd party. I have to go in and click on Computer and right click on drive F to open File from there manually..
When installing the driver from the dv3t latest driver thread ([Drivers] HP dv3, Compaq CQ35 / CQ36 (INTEL)) my computer refused to start up. I had to system restore to start up again.
I want to get this driver because of the performance advantage it states, or at least find out if there is an advantage.
Level of Importance: Urgent Dell highly recommends applying this update as soon as possible. The update contains changes to improve the reliability and availability of your Dell system.
Compatibility SystemsOperating systems Latitude E4200 Latitude E4300 Latitude E6400 Latitude E6400 ATG Latitude E6500 Dell Precision Mobile WorkStation M2400 Dell Precision Mobile WorkStation M4400 Dell Precision Mobile WorkStation M6400 Microsoft Windows Vista 32-bit Microsoft Windows Vista 64-bit Microsoft Windows XP Microsoft Windows XP x64
Fixes and Enhancements - Changes made to reduce power consumption improving battery performance. - Corrects random issues related to not being able read/write to and from CD/DVD optical drives.
I'm using Windows 8.1 on a t431s. I'm having this problem where none of my external storage is being recognized. Under "Device Manager" any sort of external storage I plug in ends up under "Other devices". When I click on the device, I get Code 28 "The drivers for this device are not installed." Trying to update the driver brings me nowhere. The devices don't appear under disk management.
What's weird is that other USB peripherals such as mice and USB headphones don't have any problem.
Here's what I've tried so far:
Updated the BIOS. Used Lenovo's SCCM package for Windows 8.1 Tried installing the individual drivers for each hard drive.
Wats up everyone,i was just wondering,if any one could give me feedback on what difference performance wise 6mb cache(with 2.80GHz) would make on the Studio Xps 16(or any laptop for that matter) Versus the 3mb that comes with the 2.4GHZ? thanks in advance
i have purchased my dell inspiron around December 2005 and now time November 2007. This is the first time I am trying to use the sd card reader. when i put the card in under the at the 'device manager' under the 'disk drivers' there is a new category created and it is "Secure Digital Storage Device'.but there is a yellow ! mark next to it. basically i cannot se the sd card reader.
what I need to do?
this is the listed drivers at the device manager cwindowssystem32driversPartMgr.sys cwindowssystem32driverssffdisk.sys cwindowssystem32drivers sffp_sd.sys
My S210 continuously is loading thumbnails when I turn it on. Just started yesterday. How to reset it? It doesn't respond to any commands and only can shutdown or restart by going to task mgr.
Recently I have had problem doing external monitor calibration under Win 8.1 64-bit. It turned out that that monitor did not show up in the "Device" pull-down menu in the Color Management. So I update the Intel HD graphic 400 driver. It didn't work. Then I uninstall the video driver and re-install from the scratch. Now I have found even the built-in monitor did not show up at the Color Management. Only printers show up in the Device pull-down menu.
I wonder if there other software or driver that I need to install? Or I have mseed up so One-touch Restore will be required?
Can I add to my HP spectre ultrabook 14-3210NR as a second HDD mSATA Crucial M500 (CT240M500SSD3) . Should I expect any problems with configuration etc?
I contacted HP support yesterday because my HP Spectre 13 Pro notebook has a lot of difficulty getting wireless internet access. Sometimes it works well, sometimes it works then drops out; and it is never able to connect using my iPhone as a hotspot for more than 10 seconds.
HP support person instructed me to install 2 updates. Now my laptop is completely not working!! It says "Boot Device Not Found". I have to wait for a technician to completely replace the hard drive, then wait a week for a USB plugin to load up a new system.
I downgraded my 13T-3000 from Windows 8 to Windows 7 via an image on a bootable USB thumb drive. However, when Windows 7 installed many of the drivers were not installed, including the NIC and the USB drivers. As a result, I can not access the internet or load any missing drivers via the USB port.how to get Windows 7 up and running?
I attached two pictures for reference. The first picture is about 1 month from brand new. The second picture is today, about 5 months from new.
Now I do expect eventual wear. Wear happens. However, I generally expect to get a good amount of use out of a product before the wear occurs. I had a Dell 9300 for 3-4 years. Its keyboard has less (cosmetic) wear then my HP at 1/10 the time frame. I literally have to wear down the key to make the key unreadable. With the HP, they just use a light coating of silver over the black plastic that just wears off readily easily, too easily for my taste.
I know I'm not the only one that has this, but I'm curious what everyone else is experiencing as well. As it stands now, my A, S, D, E, N, O, and space bar all have visible wear off of the silver coating.
I have a Envy Spectre 14" with Win 8.0. For the last month or so I have sound disappearing (totally) at random times. Rebooting has generally solved the problem...but that can be a pain if I'm in the middle of a lot of projects. It was working this morn....closed the lid...opened it 30 min later and NO sound.
I have a Y570 with Ssd and Hdd, I installed windows 7 to hdd then all drivers. My SSD was left unaloccated, when I installed rapid drive it said failed!!! And when I restarted my conputer i got the bod. I made a full backup but it says it requires a disk, I don't have one. The pdf file for rapid drive doesn't work, is their a new one?
Just bought this laptop. Upon booting up got a Rapid Start error Message. Uninstalled the Rapid Start Driver and downloaded the latest Rapid Start Intel driver from Dell Downloads. Upon trying to install it, I get the following message:
"This computer does not meet the minimum requirments for installing this software"
Intel Rapid Storage is working. I checked the BIOS and Intel Rapid Response is enabled.
I have a lenovo u410 with a 500gb hdd and a 24 gb cache. Now, I am experienced with hardware and software and have built/reinstalled a lot of computers before. This time it is a bit different. I did not get my windows 8 key with the computer only the OneKey recovery. I did do a backup with this program when the computer was new and I assume it is on the hdd.
So what I want to do is to replace the hdd with a new 2,5 in ssd and keep my windows 8 licence + all the lenovo goodness ( onekey feature, keyboard shortcuts etc..). What would be the best way of doing this? Can i transfer the backup I did to the new drive?
