Today i installed window-8 Pro (64 bit) in my thinkpad E430 machine, but after installation its not charging, its showing PLUGGED IN , NOT CHARGING , its not charging beyond 33%.
View 5 RepliesI have a problem with my battery on a brand new E430. I've used it for 1 week w/o problems and now it simply doesn't want to charge the battery anymore. It is stuck on 48% and I have a message saying "plugged in, not charging".
EDIT: I run Win 8 (64 bit) - absolutely everything is up to date, including BIOS.
what driver is missing for the unknown device with the following specs from the "Device manager"
General
- ACPI-Compliant Embedded Controller
- Drivers not installed error Code 28
device ID
- LEN0068
got every other device running with propper driver (WLAN, Ethernet, USB3.0, Intel Chipset, VCard(both), Touch scanner, Audio, Monitor, Camera, Bluetooth, Cardreader)
I want to update BIOS using the supplied ISO image. I want to write this image to a usb and then boot from it, for updating bios. How to create bootable usb.
My system is E430, though the question is quite generic.
I bought a Lenovo thinkpad E430 recently with Windows 8 operating system. There is no print screen button in it even with Fn key. How to get print screen.
View 2 Replies View RelatedHow to get onekey recovery software for windows 8.1 . and i am using thinkpad e430 laptop.
View 2 Replies View RelatedMy laptop freezes for a couple of seconds randomly from time to time. The problem sounds like this one: [URL] .....But CC cleaner did not solve the issue.
The problem happens with almost every program such as microsoft word e.g. if I type and it freezes, the words will come out after it unfreeze.
Before the freeze, the laptop usually becomes very quiet then a few seconds later something spins and freezes the computer. I can assume that it is the HDD. However, the computer does not freeze every time the hard disk spins loudly.
When the disk spins loudly, the HDD activity spikes in task manager and the 'system' is the program that corresponds to the spike which is 'ntoskrnl'. However, the data transfer is no more that 0.1 MB/s during the spike.
I tried running in safe mode and I'm not very sure if it worked. The disk spins loudly much less often but the freeze did not seem to happen. Safe mode either tells me that it is a program/connecting to the internet/(maybe the system) that makes this freeze.
I tried a hard disk scan using lenovo solution centre and it found no problems. Also tried antivirus scan using windows defender and found nothing after a full scan.
Finally specifications:
OS: Windows 8
HDD: 1TB (upgraded from 750GB)
RAM: 8GB (upgraded from 4GB)
intel Core i5 3210M @2.5GHz 2.5GHz
Bios: v2.52
The 720p webcam in my new Edge E430 (I just got it last Thursday) is not working properly. When I use the Communications Utility or Skype, the green light next to the webcam turns on, but the image window only shows a completely black image. Also, when I increase the brightness or contrast settings of the webcam, the image becomes completely gray or completely white.
The Device Manager shows two devices - the "Integrated Camera" and the "Virtual Camera." I have already tried uninstalling/reinstalling the webcam drivers, but that hasn't worked. What else can I do?
I connected with the power plug and there was no green/yellow light next to the power socket. It seems not charging at all. Now it is forever dead. Tried to take the battery pack off, and connect it directly power plug, still dead.
View 3 Replies View RelatedI own one Lenovo E430. By now he is running Windows7, fully patched and updated. My issue is related with ultra-high touching sensitivity of the TouchPad. The TouchPad can react even on cloth touch.
This is problem for me, because I use TrackPoint, I don't have external keyboard and during high utilization extra unwanted clicks lead to unpredicted events. So, my question is how can I disable the Touchpoint.
I have purchased a new E430 ,, installed windows 7 ultimate 64-bit. I installed all drivers and all is working fine.. I still have one unkown device (PCI) .. I think it's VGA .. but I installed intel HD card driver.
below is the info:
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
To find a driver for this device, click Update Driver.
device instance path:
PCIVEN_10EC&DEV_5229&SUBSYS_500017AA&REV_014&C587ECB&0&00E0
hardware ID:
PCIVEN_10EC&DEV_5229&SUBSYS_500017AA&REV_01
physical device object name:
DeviceNTPNP_PCI0016
I own a Thinkpad E430(type 3254). It's about 14 months old. Yesterday, it randomly started having an issue with it's keyboard. It acts like the enter key is continuously pressed, and about 1 sec after I hit any other key it stops. The enter key by itself has stopped working, and only shorts sometimes and results in a continuous press.
As soon as i boot, enter input is given and normal startup gets interrupted. If i press any key, it's normal again until an OS loads. For example, if i boot into debian, line breaks get inserted between the console messages that are displayed until i press a key, and if i boot windows, it gets stuck at the login screen because enter is given without the correct password so it loops. This behavior also happens sometimes randomly while working normally.
The keyboard hasn't even seen heavy usage, or any drink spills. I usually keep the laptop at my desk, and use an external keyboard. The last time I took it out was 2 weeks ago. I doubt it can be a software issue, so do I need a new keyboard?
In Skype when trying to make a call, the program crashes, I googled the issue and it seems others have had similar problems and it was fixed by updating their Intel Graphics driver.
"Intel® HD Graphics Control Panel" program also won't open, it crashes instantly.
"ThinkPad Video Features" driver fails at installation ....
I have the latest driver to the Intel Graphics, which I got from lenovo support....
OS is Win 8.1 64 bit
With this laptop, the CPU usage rises significantly whenever the battery is charging. If I'm on running on battery power or it's fully charged, I don't have this problem. The CPU stays at 2-3% while browsing the internet, for example. But browsing the internet while the battery is charging will send the CPU up to 90-100%. It's not just browsing the internet, but any task, such as running Sony Vegas, using Skype, watching a movie, etc.
Again, this only happens while the battery is charging. Everything runs much, much slower. All power management settings are identical whether it be running on battery or charging with the AC adapter, so it's not that. I am also using the 65w power adapter that was supplied with the computer, and the adapter becomes very hot to the touch while charging.
I have a ThinkPad Edge 15. It had a charging problem from the day I purchased it. The people I bought it from sent it back to IBM/Lenovo who apparently tightened the area where the charging cord goes into the PC?
That did NOT fix the issue, so when I got my laptop back, I called LEnovo, they sent me a new battery (even though I told them the 'Power Manager' said the battery was in good condition) which did nothing. Then they sent me a new charging cord, again-nada. They sent me a box to send the laptop back to them. As I was figuring out how to put the laptop in the box, I looked over @ my PC, and lo and behold; the light that tells you if it is charging was shining!
Last night. I looked @ the charging icon; '15%, not charging'! Oops! Oh dear, not again! Went to power manager, everything is just fine. Checked all of my connections, same thing. I left the laptop plugged in. This morning as I look over @ the laptop & Guess WHAT! It was charging, the light was on! I turned it on...
I have a Thinkpad Edge E520 1143 AK7, working on windows 8, 32 Bit Pro.
From somewhere in the settings I had disabled charging option on "alwyas-on" USB port since I did not possess a smart phone.
Now, I have a smart phone and wanted to re-instate the facility. However, I am unable to find the option to enable the settings.
I enabled all the 3 options from BIOS and "refreshed" the machine to default state.
The USB port charges when the system is booted and stops charging when I shut down the PC.
So this is about the only issue I have with Windows8 on my laptop, I've tried various audio drivers from OEM provided
to drivers directly from the Realtek site and I can't seem to remedy the issue....
Only during charging of my laptop or when the laptop is on battery does the jittery/distorted audio playback occur. Happens during Flash playback or local media playback using say VLC, sometimes the distortion can Freeze or lock up the system.....
I've tried Audio Drivers, Video and my BIOS is the latest. This playback issue did not occur under Windows7 when I had it installed....
I own an Edge 15, 64 bit processor. It came with 2gb RAM. I recently purchased and installed two 4 gb cards for a total of 8gb RAM. I updated my BIOS. Under "Computer>Properties" it is showing only 4 gb Install RAM. Why is it not reading or the system not using the additional 4 gb of RAM on the second card?
View 3 Replies View Relatedthe way the F keys have been switched on my Edge 14", today I came across some time to fiddle around with it. I googled what I needed to do...and came across this question on yahoo, which is exact what I need. I bought Lenovo Thinkpad Edge several months ago, and I really like it so far. But I use MS Excel a lot and I always use shortcut keys which involve F1~F12. On my thinkpad, I always have to hit "Fn" and "F1~F12" keys simultaneously, and it is a little annoying since I've been used to using F1~F12 keys without hitting "Fn". So I went to BIOS keyboard setting, and enabled the Function key lock. It became a little bit better, because now I don't have to hit "Fn" and F1~F12 simultaneously, but I could press "Fn" AND THEN, F1~F12. But what I really want is the "Fn" key always on without pressing it. On the BIOS screen, it says hitting "fn" key twice keeps "Fn" key always on, but whenever I hit it twice and hit F1~F12, it doesn't function like F1~F12 key, but it just controlls the sound volume or display light. Is there any way to keep "Fn" key always on without pressing it everytime I want to use F1~F12 keys?"
In short, in the BIOS page, once "enabled", you are able to double tap the Fn key and have it stay on without you pressing it each time; however, it doesn't appear to work that way and turns off everytime you use a F key.
The thing they call "edge to edge glass" which is really just plastic above an ordinary screen. The thing is, that the screen under that edge to edge plastic is a nice anti-glare screen, no kidding! You can see this if you take your laptop in sunlight and tilt it the right way.
So what's happening is you're getting the worst part of an anti-glare screen (reduced contrast ratio) plus the worst part of a glossy screen (unless you have a really pretty face).
I took the plastic thing off, cut along the black/clear border, pulled out the middle, and stuck the centerless border back on the laptop.
Result? THIS SCREEN IS FANTASTIC. Yeah ok, of course I would say that. But if you knew me, you'd know that was way out of the ordinary and really meant that THIS SCREEN IS FANTASTIC.
One thing you may not have considered is that the screen in its default position has yet another flaw, both sides of that glossy plastic thing are glossy, so some of the light coming from the screen is reflected back to the screen, and as you know light reflected onto the screen has a yellowish tint. That is my guess as to why the whites on this screen are really really white now, and the screen is much brighter. This also explains why other 300nit screens used to look so much brighter than this.
I will have more pics when I am able to charge the battery to my good camera. If anyone has any questions about removing that plastic thing I'll be happy to answer your questions, it's actually pretty easy. For those interested, here is how I did it:
1. I removed the "star" head screws, this was accomplished not with a special star head screw driver, but an ordinary flat head precision screw driver.
2. Put some paper over a hacksaw blade to avoid scratching, wedged it under the plastic near the top where the camera is, and snapped out the first of the several lock-in points on along the top edge. I proceeded to detatch the rest of the top of the screen in this way.
3. Both the left and right sides were held on mostly by adhesive, the very edge point locks in slightly, but the efforts removing these sides are focused mainly on separating the adhesive bond.
4. I pulled upward on the plastic and it came right off, there seems to be no adhesive or lock-in points on the bottom side.
5. Using the center of the screen as a test area, I tested several cutting utilities and decided on the utility knife. To my surprise, the plastic was about 1mm thick.
6. I clamped the screen down to the table, with a straight edge positioned 1mm inward of the black line, to give headroom for errors.
7. I cut along these lines, and repeated step 6 for each side, and pushed out the center to reveal the border piece that now resembled a common laptop screen enclosure border.
8. I used a medium grit sand paper to bring the cut lines to meet the black lines, and finished it off with a fine grit sand paper.
9. I applied some electrical tape to the area between the edge of the screen itself, and the edge of the laptop on the right and left sides because there was light leakage, and then popped the border back on and screwed it down.
Found the charger! Here's the high res shots. They do *some* justice to the screen quality.
How does this screen do for viewing blu-ray movies? I know that everyone is raving about the RGBLED, but if this option is still good, then I'll go with it, because it's about $250 cheaper...
View 9 Replies View RelatedI went insane and cut along the black-to-clear border of the m1340 screen thing. The thing they call "edge to edge glass" which is really just plastic above an ordinary screen.
The thing is, that the screen under that edge to edge plastic is a nice anti-glare screen, no kidding! You can see this if you take your laptop in sunlight and tilt it the right way.
So what's happening is you're getting the worst part of an anti-glare screen (reduced contrast ratio) plus the worst part of a glossy screen (unless you have a really pretty face).
I took the plastic thing off, cut along the black/clear border, pulled out the middle, and stuck the centerless border back on the laptop.
[url]
Heres a video I made to demonstrate the ammount of flex on the edge to edge lid. It does have flex and bend, but its not as bad as the one j3n82 reported. I recorded with an iPhone so the video quality is crap. Also forgot I had left it in portrait mode when I recorded it (I didn't have a tripod so I used a cup lol). But I hope it gives some of you a basic idea of the quality. I thought openning the blinds to allow the vertical lines will show the bend/flex a lot more. I was applying quite a bit of pressure, although it doesn't seem like I was in the video. I felt as if any harder I might have damage something, or maybe pop the edge to edge screen out. I used an 8lb dumbell, I think thats the limit.
If you noticed the cloth I used to cover the keyboard when I closed the screen, I did this this to avoid getting the smudges on the screen when I pushed the lid down onto the keyboard.
At the end of the video I tried showing the Edge to Edge display, notice how theres another layer of screen over the bezel. Thats the difference between the edge to edge.
I just bought an Edge 130 and wanted to set it up today. But I just can't enter the BIOS! I keep pressing F1 during the Lenovo splash screen. I've pressed it repeatedly, held it down, I even tried it with the Fn button pressed. Nothing worked.
I've have been working with and professionally supporting Lenovo (and before IBM) notebooks for over 10 years and not once did I have such a problem. This is only the second E-series notebook I have ever had. I bought myself an E525 last summer and had no such problems and at work we have T-, X- and W-series.
ThinkPad Edge, Win 7 Sp1. For the last month I have had a problem with the control key always down. Programs react as if the control key were pressed. MS Word 7 gives an error message that the control key is down and asks if I want to go to Safe Mode. I have had the keyboard replaced with no change. The computer has been thoroughly checked, all drivers, patches, software upgrades have been made by my Tech, and the Bios has been flashed.
Last week, I found a post on Google for Win XP where the poster had the same problems. The fix was to ensure that the Sticky Keys were turned off in Ease of Access on the Control Panel. I went to Ease of Access and turned off all of the selections, and the fix seemed to work. However, yesterday the problem reoccurred. I don't know if it is a problem with the motherboard, hardware, or with Windows. It appears that this problem affects more than one version of Windows.
My Edge E40 has no display, I tried
-Hard booting... 60 secs of holding power button without battery or A/c adaper
-Removing the RAM HDD CD and tried booting
-Attaching to my old CRT monitor
NOTHING works
How can one find if it is booting at all since there is no HDD indicator in E40..??
I'm running a Windows 8 Pro 64bit on my Thinkpad X200s. What is the absolute more ram usable and recognized by the laptop?
View 9 Replies View RelatedI have noticed that on my Lenovo Y50 Windows 8.1 64 bit when I play video files (mp4 or mkv) on both VLC player or Windows Media player or this other Video app that is installed by default on Windows 8.1 they are all laggy. The only difference is how they are laggy on each software, VLC for instance gets like invert colour grey kind of lasting 3-5 seconds inserts. On WMP it slows down and then speeds up quickly to catch up every 15- 20 seconds lasting for a bout 3 seconds and very similar issue on Video app. There is no problem with online videos, only what's on my computer.
I have checked my video drivers, seems to be up to date.
System Manufacturer: LENOVO
System Model: 20378
System Type: x64-based PC
GeForce GTX860M driver version 347.52
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 60 Stepping 3 GenuineInt
el ~2501 Mhz
[code].....
Lenovo Y50, 16GB RAM, GTX860M
I have a Lenovo Thinkpad Edge E530. Occasionally I will have the following icon pop up on my screen and refuse to go away: A reverse google image search told me this is the logo for the "thinklight", which as far as I know is not actually equipped on this model. As a side note, I have seen this happen on a friend's E530 as well.
View 4 Replies View RelatedI'm encountering having just purchased my laptop. None are dealbreakers and I'm not that put off by them but the fact that I'm not able to figure out a solution bothers me. Primarily, no matter what power setting I'm on or settings I change the display will turn off after 1 minute. Ther other power settings still come into play when they should (computer sleeps etc.) but I'm not able to delay the screen turning off.
View 5 Replies View Related