Lenovo E420 11e E/Edge :: Keyboard And Mouse Not Working
Jul 16, 2013
My Thinkpad boots successfully but then I cannot use either the keyboard or the mouse. No input at all possible. Even alt ctl del does not work. I have rebooted many times. I tried booting in SAFE MODE but that has not worked either. I do not have a recovery DVD at this location.
I'm encountering having just purchased my laptop. None are dealbreakers and I'm not that put off by them but the fact that I'm not able to figure out a solution bothers me. Primarily, no matter what power setting I'm on or settings I change the display will turn off after 1 minute. Ther other power settings still come into play when they should (computer sleeps etc.) but I'm not able to delay the screen turning off.
I just installed two new memory modules (4 GB each) but my laptop only recognizes one of them. I've tried researching how to change the RAM voltage in BIOS to see if that will allow the laptop to recognize both memory modules but can't find out how to do so.
How to change the RAM voltage in BIOS (specifically from 1.5V to 1.6V).
I've had several laptops but I am hating this one and is basically the Fn Keys and F# Key. I am pretty customed to use keys like F4(invoking word magic), F5 (update), Alt+F4 (closing windows)...
So, now I have to press Fn + F4 Keys, Fn + F5 Keys and Fn + Alt + F5 Keys....
So is there a way to continue pressing just F4 F5 and that's it?
I have an E420, I use the functions keys F1-F12 100 times more than I do for volume, monitor, etc. I find it annoying and frustrating that when I do decide I want to change the volume I always get a pop that prompts me to change the behavior. How can I disable this annoying popup without losing the special key functionality?
I am planning to upgrade my RAM on my E420(1141CTO). It already has a 4 Gb on one slot. Couple of questions here.
1. What is the max RAM I can go upto on this E420 (Intel i3 2nd Gen) laptop. 2. As I have 4 GB on one slot can I put one 8Gb RAM (single module) on the other slot. 3. What brand of RAM I can use. 4. On this model can I fix another RAM myself easily or asking it the other way are the slots placed such that I can do it easily by merely oepning a couple of screws or do I have to tear everything apart. 5. Any other special considerations like about clock speed ?
I just got my lenovo thinkpad edge e420 and after about a month of using it the on screen display for volume, microphone, camera, etc the f buttons has stopped showing up on my screen. I had not updated any drivers or anything i think i may have uninstalled one of the programs for this by accident i am not sure....
i just updated my drives for AMD Radeon HD6630M with new beta2 catalyst but now i cant switch graphic cards. I tried to go into CCC - Method switchable graphics selected Manualy switch GPU pressed apply and nothing happend. Atleast i tried to uninstal this CCC isntal the old one and tried again. Problem remains and now im sad about this becouse my games are now useless . I can just select which GPU i want for aplications but its bad cause my fps dropped. I just realized before windows score with randomly switching cards for aplications is just 6,3 for games and 4,9 for other stuff. Before i have 6,7 for both becouse i selected the AMD GPU FOREVER.
It came pre installed with synaptics 15.0.24.0 and windows 7
When i move a window partially out of the screen, and i move the mouse on the edge the window is, it automatically moves the window back to the screen. Iwant to stop this.
aero snap is disabled.
this don't happen in safe mode, so is definitely some third party application?
Is there any way to simulate pressing the break key on the Edge 14 keyboard? I need it for debugging and to maximize the Remote Desktop window. Dell used the Fn F12 on keyboards that they removed the key. Does Lenovo has mapped this function to any other key combination?
I have a Dell Inspiron 7000 series and 2 days ago Windows installed a critical update which stopped my keyboard and mouse working, I have had to do a system restore to get it working again but with it being a critical update I'm assuming I will need it.
I have a Lenovo G510 and Windows 8.1. I can´t use keyboard and mouse at the same time. When i typing the mousepad locks. I guess this is a feature but I wan´t it turned off but I don´t know how to do that.
I have tested with the drivers for Windows 8.1 and Windows 8, listed here: [URL] ....
I then even tried with installing the driver for Windows 8 from: [URL] ....
But when I got through the installation process the "installation program" says the driver couldn´t be installed.
I tried with the advice in this thread: [URL] ....
but I have synaptics 7.5 and not 7.4. I also tried fixing with the register but didn´t find the entry PalmKms. I did do find other entries with Palm.
I see this as a major problem since it makes me completely unable to use any program that require simultaneously use of the keyboard and mouse. Therefore I guess that must be a solution for this?
I have recently updated the BIOS on my E530 laptop to version 2.08 (the previously installed version was 1.xx, probably 1.37 as far as I remember, but am not sure about the exact version..). After the update the laptop keyboard and touchpad stopped working in Windows.
The keyboard does, however, work in the BIOS and both (keyboard and touchpad) work when the computer enters the Windows-startup-screen (where it suggests to fix hard drive errors etc.).
I am using Windows 8 all along and before I never had problems with my hardware. Now both the keyboard and touchpad are recognized in Window's Device manager, but are known to have troubles. There is also a PCI Device recognized in the category "Other devices", but it's missing any drivers (I wonder if there is a connection..). All those three are recognized as such by the Lenovo Solutions Center as well.
I have tried reinstalling the UltraNav drivers, but it wouldn't work. Also, I've tried finding any possible configuration regarding my problem in the BIOS, but was unsuccessful. If I attach an external mouse or keyboard, they work. I really don't know what else to do to get my laptop's keyboard & touchpad working!
The complete description of my laptop is: ThinkPad Edge E530 (3259-HLG), running Windows 8 (x64).
I have a Yoga 2 11. It seems that all of a sudden that Lenovo Transition is not disabling the mouse and keyboard until the computer is in the full tablet mode. It used to disable these features in stand mode so when the computer is sitting on the keyboard, it's not pressing any keys. But it's not working anymore. I have uninstalled the program, re-downloaded the software from lenovo, installed it, and also checked for updates. I also tried both drivers for windows 8 and 8.1 ....
I own a Thinkpad E430(type 3254). It's about 14 months old. Yesterday, it randomly started having an issue with it's keyboard. It acts like the enter key is continuously pressed, and about 1 sec after I hit any other key it stops. The enter key by itself has stopped working, and only shorts sometimes and results in a continuous press.
As soon as i boot, enter input is given and normal startup gets interrupted. If i press any key, it's normal again until an OS loads. For example, if i boot into debian, line breaks get inserted between the console messages that are displayed until i press a key, and if i boot windows, it gets stuck at the login screen because enter is given without the correct password so it loops. This behavior also happens sometimes randomly while working normally.
The keyboard hasn't even seen heavy usage, or any drink spills. I usually keep the laptop at my desk, and use an external keyboard. The last time I took it out was 2 weeks ago. I doubt it can be a software issue, so do I need a new keyboard?
my express cache doesn't seem to be working. i've recently had to format my laptop, ive got it all back working and installed the latest express cache software, everytime i run ECCMD.EXE -INFO from ele.exe i just keep getting the following:
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:Windowssystem32>eccmd -info ExpressCache Command Version 1.3.110.0 Copyright® 2010-2013 Condusiv Technologies. Date Time: 7/7/2014 0:34:31:581 (JAMES-THINK #0)
After some virus problems I set up my system from the scratch, formatting the hard drive and reinstalling Windows. I also downloaded the Lenovo System Updater, installed all updates and downloaded the ThinkVantage Solution Center. Now, the PC works again BUT the WiFi adapter does not work. It seems to be non-existent, if I press F9 it says I am suppossed to press the hardware switch. I have a ThinkPad Edge 15, it does not have such a switch at all.
In the hardware manager i find one network device without driver, so I suppose this is it. However, no driver seems to work. I downloaded the WiFi dirver(s) from the Lenovo website and installed them, nothing happens. What can I do?
Here are my specifications: -Thinkpad Edge 15 -Windows 7 Home Premium (OEM) - the driver I installed which did not work: Intel Wireless LAN (bg, abg, abgn) for Windows 7 (32-bit, 64-bit), XP - ThinkPad
I am pretty certain that the hardware works, before I set uo the system WiFi was not at all a problem.
I just installed Skype, mostly to test the camera, and the green light is on but I can't see anything. Skype just shows an outline of a camera with a diagonal line though it no matter which camera option I pick.
Corresponding shortcut for Pause, Break, SysRq and Scroll Lock on E540 model because they are not displayed on the keyboard, just like every other lenovo laptop...
I've got a brandnew Thinkpad E530 with Windows 8 and integrated Camera. But the Camera is not wotking. When I start the Camera-App, the green Light of the Camera starts to shine, but there is no preview. Theres is only a picture of a crossed camera. Also if i start skype, my skype-partner can't see me.
I already had a look in the BIOS if the Camera is enabled (it is) and reinstalled the driver of the camera.
I have been using the Communications Utility (Lenovo - Web Conferencing) when I first bought the laptop, a few months ago everything was fine. But now when I press F5 (hotkey for camera options) there is a pop up with massage "Communication Utility Main UI has stopped working".
Everything is fine in Device Manager.
Is it a hardware problem? Is there a way to check?
All my drivers are up to date, my mouse has new batteries, and I tried this fix:
[URL]
Now my Bluetooth mouse only works after I reboot the computer, but then disconnects after a while, and I can't even add it again to my Bluetooth devices.
The 720p webcam in my new Edge E430 (I just got it last Thursday) is not working properly. When I use the Communications Utility or Skype, the green light next to the webcam turns on, but the image window only shows a completely black image. Also, when I increase the brightness or contrast settings of the webcam, the image becomes completely gray or completely white.
The Device Manager shows two devices - the "Integrated Camera" and the "Virtual Camera." I have already tried uninstalling/reinstalling the webcam drivers, but that hasn't worked. What else can I do?
I can't found my camera device in device manager and there is no imaging devices in device manager. There is no camera tab in Communication Settings (Fn+F5)...
I tried to install "Integrated Camera Driver (1.0M) for Windows 7 (32-bit, 64-bit), XP - Notebooks" "Integrated Camera Driver (0.3M) for Windows 7 (32-bit, 64-bit), XP - Notebooks" but nothing happened ..
In the first time when I installed the windows the camera was working but now it's not !!
My Laptop is : ThinkPad Edge E530 My OS is : Windows 7 32-bot
yesterday my E330 arrived with no operating system installed. After the Windows 7 Ultimate installation was finished I was already disappounted, because no driver was detected. So I had to manually download all drivers from the slow lenovo site. After I installed all drivers (also BIOS updates and Win updates) the Wlan wasnt working. Tried both, the realtek and the broadcom driver, none of them is working. Can't conntact the support because the page won't load. After a few hours of trying to fix the problem I dont know what to do anymore.
Since updating to ThinkPad Bluetooth software 6.5.1.2700 on July 28, 2012, my ThinkPad Bluetooth mouse will stop working after using it for several hours. Disabling power management in Bluetooth does not seem to solve the problem. Please provide a download link to the prior version of ThinkPad Bluetooth software until this issue is resolved.
I have Thinkpad Edge E330 bought this July, with win8 downgraded to win7. It recently started a problem where the laptop's own display doesn't display anything (just blank) if I don't have external display connected. The external display doesn't have be in use, just connected, and E330's own display works fine. If I disconnect the external display, the E330's own display goes blank also. It doesn't matter what display setting I have.Currently I'm not able to use my E330 as a laptop at all.