Lenovo P/Y/Z Series :: Z575 Will Not Boot From HDD Or Restore DVD
Nov 15, 2014
2 year old Z575 laptop which, immediately after an automatic windows update, refuses to boot either from the hdd or restore DVD (blue screen). Will not boot into safe mode, will not boot from a third party rescue DVD. On boot attempt it will show the option to launch startup repair. The repair shows it is unable to repair with the following problem detail error messages:
Problem signature 1: 6.1.7600.16385
Problem signature 2: 6.1.7600.16385
Problem signature 3: unknown
Problem signature 4: 21200196
Problem signature 5: auto failover
Problem signature 6: 7
Problem signature 7: bad driver
OS version: 6.1.7601.2.1.0.256.1
Normally would think the hdd failed or that the windows update had caused a software issue but the failure to boot from any Restore/recovery disk makes me think there is another serious issue with the laptop hardware.
Additional note: when attempting to boot from a restore disk, the blue screen appears, error message:
I have also removed the hdd and RAM, reseated and restarted, no change.
Additional note: I was able to access the hdd with an old, ram-based recovery program (SpaceFM) loaded via the DVD drive. The hdd data appears intact. Still won't boot from the hdd or a windows system DVD.
I have OKR working for me beautifully. However, when I choose "System Recovery", it only presents me with selecting from C: or D: (partitions on the only internal HDD). It does not let me choose backups that it itself created on my external USB HDD ( F: ).
How do I tell OKR to select a backup that it created on an external USB HDD?
I have a new G500 with a 500GB drive and Windows 8.1 preinstalled. I foolishly thought it would be easy to upgrade it to 1TB, which is supposed to be supported by the hardware according to the technical documents. Using OKR I have created a backup USB disk, ensuring that the option to copy the Recovery Partition is checked. All appears fine, I get a message to say that the disk was created successfully. I have not taken the recommended option to delete the recovery partition at this point. When I then replace the internal drive, boot from the recovery USB drive and run the restore, it fails at 42% with the message "There was a problem resetting your PC." No other information is provided and the only option available is to power off the PC. I have tried all three USB ports, 2 different 1TB disks and have tried all the options available. I have also tried two different USB disks for the back up.
This machine is only 2 weeks old but it is starting to drive me round the bend. As it takes the best part of two hours to fail it is a time consuming procedure.
It seems that Lenovo's backup/restore software simply doesn't work. It may be something to do with the BIOS - this machine has a newer version than is available from Lenovo's website.
So I've had this laptop for a while and it has been working well for a few months but last time when I went to turn it on, all my files were deleted.
All my programs were still there, but images, documents and other files are all gone.
This happens whenever I turn my laptop off and turn it back on, when I put it to sleep and wake it up, my things are still there. I have Windows 8 and I'm fairly new to Windows 8...
My Ideapoad P500 is approximately 16 months old (so the warranty period is out, obviously!) A couple of nights after a reboot I got the message "Repairing Hard Disk errors. This could take an hour or longer."... or something very similar. The laptop hung up at that message for more than 18 hours.
I did a hard reboot and now get the message "Checking media" followed by the error "Boot failed." This leads to the message, "Default Boot Device Missing or Boot Failed."No I don't have any recovery media.Yes I have pretty recent backups so that is not a problem.I've got an enclosure that I can use to hook my laptop hard drive up to so I can see if the drive is even readable.
Now here is the 64 thousand dollar question... how do I get the hard drive out of the laptop? I have taken the five screws out of the back. At that point, I think the DVD drive should slide out, but it does not.how to get the hard drive out?
I have a y500 Lenovo gaming laptop with Windows 8, and for the past couple of days, each time my laptop is put in hibernation or powered down, whenever I turn it back on it gives me this message:
"Default Boot Device Missing or boot failed Insert recovery media and hit any key Then select boot manager to choose a new boot device to boot or recovery media."
Then it brings me to a page with 3 boot options, and only the Windows Boot Manager works. I'm doing scans and hardware scans but so far nothing is being found. This laptop is less than 2 months old so I really don't think it's a hardware problem, and I haven't downloaded anything recently that may have messed this up. I would contact Lenovo but I'm unsure if this is an issue with the laptop, or Windows 8.
I get the error in the Title after i tried to flash the latest BIOS update for the Z510. I can press ok and then get into the boot manager but i cant choose anything there. Also I cant boot from a Disk with e.g. XP on it.
I also tried the Inside BIOS crisis mode (fn+r) with the BIOS file on my USB drive but it doesn't work and tries to access the file on the USB drive but boots normally instead to the error again. (Couldn't try it with removed battery as I have to remove the whole back to remove the battery on the Z510).
I have a U530. I had to restore the laptop to factory configuration. However, after the restore the MMC slot and the USB slots do not work properly. The MMC slot does not work at all. The USB slots will work with newer sticks (3.0?), but not older sticks that I have (which are properly recognized by all other PCs I have running 8.1). I went to the support site and installed the "latest" drivers, but they did not resolve the problem. I tried installing the latest firmware, but it returned "LoadImage() Failed! Access Denied. Error: Update BIOS Failed! Unload Image() Failed! Invalid Parameter. InsydeH20 - Secure Flash. Error: Firmware update failed!!! Please press any key to reset system......"
I've already spent the time to reinstall all my software and really do not have the time to try another reset to factory configuration. How to get my MMC and USB slots working properly.
I had two of the same Windows 8.1 OS on my Y500 (Cloned from original to SSD). Then Last night I tried to 'refresh without affecting your files' option for my OS on the HDD so I have a fresh OS to go back to incase anything happend. then on the Lenovo screen it said that the E: drive was being refreshed as well so I freaked and turned off the computer. NOw I cant access either of the OS's. What should I do? I did do a back up right before and the back up files are still there in a partition I made in the HDD. I used a USB boot of Puppy LInux to see the files on my HDD but it would not let me transfer it to an External Hard Drive. I will Try to install a better linux and try to transfer the OKR files to another Drive.
-how would I go about restoring the back up files if I were to get them on another drive?
My IT dept made some changes to my W530 and now fastboot is not using SSD drive of (16G).I'm planning on using the "Restore" option found under My computer. If I select this option, I pressume all the factory default programs will install and wipe out the rest of the drive correct? If I do this will my fastboot be enabled once again?
I recently bought an ideapad y510p. It came with win8 pre-installed and I don't have any recovery CDs. I plan to play around with linux on this laptop, but don't want to lose win8. So before I potentially reformat everything away, I'm thinking of making a clone copy of my hard-disk to an external USB drive. The general plan is like this,
1. make copy of laptop HDD to external usb drive 2. muck around with linux - and stupidly reformat everything in the process 3. get fed up with linux and want to go back to windows 4. copy back data from external usb driver to latop HDD 5. return to comfort of win8
Will using this tool (clonezilla) work in the above scenario? [URL] ...
My intent with the backup, is that after I "restore" things, the "one key recovery" button should continue to work as before.
I'm having a Lenovo V480 i5-3230M as you know it pre- install with Windows 7 Pro 64Bit & it has license for Windows 8 Pro 64Bit . I think I want to reinstall my computer but the problem now all the recovery set that Lenovo supplies to me is Windows 8 Pro not the Windows 7 Pro. So, if I'm using the One Key button, are they going to restore my computer to Windows 7 Pro or to Windows 8 Pro?
I lost the restore partition on the original SSD that my Yoga 13 shipped with. Is there a collection of drivers and whatnot that would allow me to restore it to factory defaults on my own with a fresh windows installation? I have the win8 key from the BIOS but don't want to lose out on all the required drivers if I were to just reinstall windows myself.
I've just bought this laptop, and it came with windows 8 preinstalled, and I'm trying to install Windows 7 on it.
I have a bootable usb, which I've used many times to install Windows on my other laptops, but the B590 just wont do it. I feel like I've tried everything. I changed the boot priority order in BIOS with USB HDD as number 1 but it still just boots into windows 8.
I've tried removing everything but USB devices from the boot order, and now I get this boot menu: [URL]
Which is exactly what I want to boot from, but when I press enter to boot from the USB device, nothing happens.
The USB device IS bootable with a primary partition. I've used these steps to make it bootable in DISKPART [URL]
After having no luck on the B590, I tried booting on the USB on a different computer, and it works perfectly well. Starts installing windows 7. So it seems like the problem is not with my usb device.
I even tried restoring the USB drive and using Lenovo Bootable Generator application to make the usb bootable, with the same result.
i can't boot on an USB key, the secure boot is desabled and when i press enter to boot on the USB key nothing happen. I had tested with 3 different usb key and 2 different OS. And it work on other laptop i have a lenovo twist... i think its in the BIOS but i had check all options
I have a new y510p I just received this week. First thing I did was replace the 1TB HD with my own OCZ Vertex 4 256GB SSD Drive.When I power on the laptop for the first time, it does not find a bootable device (goes through network devices, then says no bootable devices). If I use ctrl-alt-delete to reboot the laptop, it then finds the drive on its own and starts booting into Windows.
I'd like to understand why this does not work on the first boot? I went into the BIOS and saw it says there that no drives are detected.This worries me slightly, as perhaps one day it will decide to no longer recognize the drive after the ctrl-alt-delete?
I just bought Z50-75 with AMD FX7500, 8GB Ram and FreeDOS. I installed Windows 8.1 Pro, and they pulled some drivers during the installation, and I went to Lenovo sight and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and all was O.K. The last drivers that I saw on the site were BIOS drivers, and I downloaded those to and it started the installation after which it said:"The system will now restart for changes to make effect", and it did, but, it would not boot up after that, all it did was show me this on the screen:
And I tried both of the options (the second one with the Windows CD inside), but it just stays where it is, no effect.
I can enter the bios and change the settings, but none of them seem to work because this is the maximum where it will go, the only difference is when I change from AHCI to Compatible mode, it restarts and than I have a blank screen, I have to use the One button Recovery to get back to this one from the picture above...
I have disabled the secure boot and changed the boot to Legacy Only.It still doesn't work.I have also tried updating my bios to the latest version using the Lenovo Solution Center.
I got this idela pad U410 about a year ago and it was functioning nornally. A few months ago it started to boot up very slowly when power cycles. A hibernate was quick. Now it never comes up and keeps waiting at the Lenovo screen, no windows. I have seen posts that say it is a manufacturing defect. This one is out of warranty, so what is the solution. Do we have a solution at all? Why does Lenovo market such a bad product. BTW, the back cover is so flimsy that it gave up and had to replace it. Overall a case of bad engineering i guess.
I bought the Lenovo Ideapad Z500 and I'm trying to boot from a USB drive in order to install Windows on it. When I start the boot menu I only see the hard-drive, the DVD and the network. I tried to set both UEFI mode and Legacy mode in BIOS but the USB stick does not appear in the menu when I boot. I put the image of windows with Windows 7 USB DVD Download Tool which formats the stick in NTFS mode.
I have the latest BIOS v1.21 and I tried with 2 different USB sticks: one 16GB USB 2.0 Corsair and with a 32GB USB 3.0 ADATA both on USB 3.0 and USB 2.0 ports on the notebook. I really haven't seen anything like this in my entire career. I even downloaded the file efiootBOOTX64.efi and replaced the one that Windows come with on the specified folder on the USB stick ....
Why is so difficult to choose the USB boot drive on the newer notebooks? How can I boot from USB?
Just got the y510p laptop and am trying to install Ubuntu so I have this bootable DVD and I wanted to try Ubuntu before installing as usual but I can't get the laptop to bot on dvd. On boot menu options there is only EFI and some kind of network options but no dvd. I tried following instructions here but no matter how many times I press F1 during startup, I can't get to boot menu and windows starts directly: [URL] Is it not possible to boot on dvd. The dvd is ubuntu 13.10 supposedly compatible with EFI and secure boot. I don't understand why there is no option to reorder boot devices like on all my older PCs.
I manage to get BIOS setup pressing restart and shift and then selecting UEFI firware settings and I do get to bios setups but again no way to find the option for booting on a dvd.
I am trying to do a clean install on my good, old Thinkpad X230 which came with 64-bit Windows 7 Professional. For some reason, I was not able to create a bootable media from the recovery partition. In any case, I wanted to avoid the recovery partition as I want a basic, non-bloated, and minimal install.
Hence, I downloaded a copy of 64-bit Windows 7 Professional from Microsoft/ digital river website. After performing the checksum, I used Microsoft's USB DVD Download Tool to make a bootable USB on Kingston Flash Voyager (USB 2.0; 8 GB; FAT32). BTW, just for the heck of it, I verified that it boots on my spare (and even older) Thinkpad X60 -- though it doesn't proceed when it sees that the X60 has a 32-bit microprocessor.
The relevant BIOS values and settings are as follows:
UEFI BIOS Version G2ET95WW (2.55) UEFI BIOS Date 2013-July-09 UEFI Secure Boot Off
[URL] ....
I am posting this query after trying a number of solutions : rebooting from a USB flash drive on my Thinkpad X230. For some reason, nothing has worked and pressing F12 only shows the ATA HDD0 hard drive. Among other things, I have tried the following:
- Updated the Intel USB 3.0 eXtensible Host Controller driver using Lenovo's Thinkvantage Tools. Now it has version 1.0.9.254. Someone suggested to have at least 1.4.0.225 which is apparently available at Intel's website. I always considered downloading the device drivers from Lenovo to be kosher. Shall I download it from Intel's website?
- Disabled USB 3.0 from BIOS which made all USB ports to act as USB 2.0. Neither option works. - Tried booting from all three USB ports (of which one is USB 2.0 and two are USB 3.0). Zilch. - Have yet to try "reset BIOS to default" suggestion as it looked a bit of a last resort.
Recently bought a Y510p laptop and of course I wanted to have an SSD as the boot drive.
I downloaded a cloning software and cloned the Windows OS partition as I had intended to keep all of Lenovo's original partitions intact on the original hard disk.
I put the original HDD in a caddy and replaced the DVD Drive and put the SSD where the original HDD was.
I tried changing boot order in the Bios but no matter what it only reverts to boot from the original HDD.
I'm not sure what I have to do to make it boot from the SSD, clone all the partitions from the HDD? I don't have any Windows 8 disks or anything so I just want to clone the original hard drive as it came installed in the laptop.
I've noticed that my laptop doesn't start at first power on. A push the start button, Lenovo image is showing but after few second the power go off. I need to push again the power button and then the laptop start without problem.
I just got a brand new thinkpad X240, with 500G HD, Win8. I installed a Win7 on this new SSD, then replaced original 500G HD in X240 with this new SSD. However, after I replaced, computer cannot boot , it got stuck with BOOT MENU section, no matter you choose any options..In the Boot Menu, I saw boot devices: one is my new SSD. I click it, it does not work. I tried several times. (PC can recognize my SSD, just dont know why it cannot read it.)
I am sure this SSD is working, since I tested on different computers, they can boot successfully.
I'm having a problem with my IdeaPad Z585 laptop.When I boot it, it clicks exactly 16 times before it goes to a black screen. It does the same thing when I attempt a restart, but it will eventually restart normally after 10 attempts.
My Lenovo U430 touch came with a Samsung 128GB SSD. Since it was becoming a little on the small side, I decided to replace it with a Samsung EVO 250GB SSD.
My first thought was to clone the old SSD and then resize the partitions afterwards. I quickly ran into trouble, the cloning didn't work out. So I decided to begin from scratch. So I installed the new SSD and installed a bare Windows 8.1 Pro install.
Although everythings works one thing is still bugging me. For the new Samsung SSD to be bootable I must:
- Disable Secure Boot - Enable Legacy booting
I thought all the necessary codes were a BIOS / OS thing?
