Had the laptop for 11 months no issues, I woke up to find the computer stuck on the startup screen. Tried rebooting, took out the battery, tried it pluged in, unpluged and it keeps stopping at the startup screen.
I'm having trouble figuring out why on my T520, after upgrading from 8GB/1333Mhz to 16GB/1600Mhz Crucial RAM, Speccy/CPU-Z still says they're running at around ~660Mhz x 2 = ~1330?
My specs are as follows:
For my T520 (4239-CTO) I have...
Processor: Intel Core i7-2860QM 2.5Ghz RAM: Crucial 16GB (8GB x 2) DDR3-1600 GPU: Intel HD 3000 / NVIDIA QUADRO NVS 4200M OS: Windows 7 Ultimate x64 SP1 (w/latest updates)
After Googling for a while and from looking around here I've read nothing that says I shouldn't be able to run at 1600Mhz especially considering my processor supports that speed officially. Another post on this topic (not for the T520 specifically) mentioned that i7's contain the memory controller within itself. So... am I being thwarted by software settings in the BIOS or within my operating system?
I bought a ThinkPad 540p that comes with preloaded Windows 8.1. As I want to dual boot the machine I tried to select the Legacy Boot option in the BIOS/Startup tab, but I can't do anything as the option UEFI/Legacy Book is greyed out and locked in "UEFI Only". Below it there is an option called: -CSM Support that is also greyed out and selected as [No]. (below these options there is a little note with an asterisk saying "Unselectable for Secure Boot").
How can I enable the UEFI/Legacy Boot option again in order to dual boot the computer? I want to be able to boot from USB or from the CD Drive.
This computer originally had an issue with the 2100 Detection Error. This computer was previously built with no issues when it was imaged with our company's Windows 8 configuration in which I am highly sure our IT engineers have worked closely with Lenovo on. Also out of the tens of thousand computers that were imaged this way this is the only system I have dealt with that has this issue. I luckily had a good T440 I could test this system's SSD in. The hard drive appears to be fine with no issues. So that rules out to be the SSD. I ordered a system board under warranty and installed it. Everything so far responded fine with the system board replacement until I performed the model type/serial number and UUID update using my 1.86 maintenance update USB thumb drive. After that completed the computer froze on the Thinkpad Logo screen. I verified again for my piece of mind that the memory module and SSD was fine. Sure enough those components were tested fine in a known working T440. So I submitted the system board as a DOA with an explanation. I received another system board to replace with the DOA. I installed that system board to once again update the Model Type/Serial Number and UUID using my USB maintenance disk 1.86 thumbdrive to once again end up with a locked computer at the Thinkpad Logo screen. I have replaced a couple of other T440 and T540 system boards during this time also with using the same USB maintenance disk thumbdrive used for updating those system's model type/serial number and UUID. So I know the issue is not with the USB thumb drive. I am very frustrated with this system. I hate to keep submitting DOAs for the same system.
Since the BIOS is part of the system board and I have not had these issues with the many T440 system boards I have replaced successfully that performing a BIOS update is not a good excuse why this doesn't work on this particular T440 and since after replacing a system board under "DOA" and updating with the maintenance disk and froze there is not a way I can run a BIOs update on this system now right?
I have a T440s and have an issue with the camera. It seems to turn on (little green light comes on) when I access the Windows 8 camera app or any other app (like skype), but I do not see anything out of the camera except for a gray screen with a camera icon that has a bar through it. It looks like the camera needs to be activated somewhere but where to look. I have checked the driver and it seems to be fine (no yellow warning icon), I even unistalled and reinstalled the latest camera driver from the support website but that does not change anything.
On may 2014 i bought a lenovo thinkpad t440p from amazon. Recently the screen make some white stripes if you press lightly on the borders or if you move the screen.
I dont know how to proceed to check it ( the computer is still on warranty from lenovo )... Also the computer showed me a warning message on harddisk SMART short self test when i run the hardware test.
During a restart, a prompt to the effect of "Push Enter to Interrupt Startup" appears beneath the Lenovo logo. When I depress the Enter key, I get the message "Launching the startup interrupt menu" and then the device merrily continues on its path to launch Windows 8.1 Pro.
Initially, I thought this may have had something to do with a recent update to the Fingerprint Reader; however, de-installing that package had no effect. I can workaround this glitch; however, it was so nice to be able to simply specify something like a different boot device rather than having to go into the Setup menu.
My T400 display works at BIOS startup but goes black was soon as Windows 7 starts to load.. Video out put works and I can see an UN Backlit image on the display. Is there some sort back light controller /driver that may be broken.
I can't get into the bios anymore. I updated the bios via the BIOS Update Utility 2.56 and after that I can't see the "press enter to interupt normal startup" message anymore. And therfore can't get into the bios. Windows is still booting normally.
I recently upgraded my Lenovo ThinkPad T400 with a Crucial M500 (240GB SATA SSD 7mm) and 8GB Kit (DDR3 PC3-8500 NON-ECC) RAM.
After a couple of days of trail and error I eventually installed (successfully, I might add) Windows 7 via USB. I leave my laptop on when I sleep, but in the morning it's shut off. When I power it on I get to the Windows did not shut down properly and I always select the "Start Windows Normally" option and additionally Google Chrome informs me that it wasn't shut down properly and restores my tabs.
Why it randomly shuts itself off... Also, when I try to run my system rating after one or two flashes of the screen my laptop turns off, so I am unable to do this as well.
As a finance person I need to use the F1, F2, ....., F12 keys on a regular basis. My issue is that I need to always use FN+F1, FN+F2, ....., FN+F12 to work, which is not the most convenient thing to do.
Is there any way to switch these two? Going in the BIOS offers me only the opportunity to switch between Ctrl and Fn.
I'm tried hard-booting the device, but no dice. When I push the power button, I show activity in the status lights and can feel heat coming out of the heatsink. I think I see the 'ThinkPad' screen displaying very faintly at that time, but it seems not to proceed through the regular boot process. I'm definitely not able to get to a BIOS post.
I am unable to enter the BIOS (or the boot device and application menu) of my T530. When I press Enter at the 'Press Enter to interrupt normal startup' prompt, nothing happens. It just ignores my input completely. F1 doesn't do anything either.
Otherwise my ThinkPad is working fine, but I would like to change some settings (especially change the boot device, to boot from USB).
I'm running Win 7, and I have the most up-to-date drivers from the Lenovo site. I have turned on loudness equalization, but it has not worked. This is an across-the-board problem. What I mean by that is, this problem persists regardless of the application, which I happen to be using. For instance, I use Media Player Classic: Home Cinema to watch movies. If the volume is at 0%, as I begin adjusting it upward, the volume level rises. However, as I reach about 70%, the volume stops increasing. There are audio adjustments w/in the application to boost the volume, but they serve to provide minimal effects. Overall, the volume is incredibly low. If you're sitting more than a few feet away from the laptop, it is inaudible.
I purchased a manufacturer refurbished Lenovo Thinkpad T410 2522EC8 a few days ago. My USB ports are simply not responding to anything. I've tried uninstalling and reinstalling the drivers. The only sign the USB ports show is when I plug in my mouse, the mouse lights up, but it doesn't actually work. Also, when I look under disk management, the only drives that show up are System Reserved, C: Drive, and D: Drive.
i have purchased an 8 gb Kingston Ram module ( KTL-TP3CL). My plan was to upgrade my thinkpad T540p with 12 gb of ram. My configuration is ( i5/4gb ram/hd 4600/W7 pro/500gb hdd). The thing is that I am having second thoughts about having two modules from a different manufacturer and of different capacity.
I just got myself a thinpad T440p and was planning on getting a docking station. Since i have never gotten one before i was confused on which one should i get. I wanted to get the thinkpad Ultra Dock but was confused on how i would determine if i should be getting the 90W, 135W or the 170W. I live in Canada, Ontario if it makes a difference.
I was also curious, whats the main difference between the basic dock and ultra dock. Is it worth it for me to get the ultra for work?
I has just upgraded my Thinkpad t440 from windows 7 to Windows 8.1 pro. But i could not find Power Manager software to install in my laptop. I want this software to manage my battery to ensure that it stop charging when 80% capacity. I think that it is useful for my battery.
I just bought ThinkPad T430 and optical bay adapter IB-AC642 [URL] for my ssd 128 OCZ VERTEX 4. I put ssd into optical bay but thinkpad doesn't recognize it. I try with different disc but I have the same problem.
My optical bay adapter with this sdd OCZ VERTEX 4 is working in my another laptop so the problem is only with thinkpad. I tried to change bios settings but it didn't work.
I recently bought a Thinkpad 540p and wanted to know a way for stopping the battery from getting charged after a certain level. Its a very common feature to stop a battery from charging say after 80% and run on AC power supply directly.
Other lenovo laptops do support it, under various apps like Energy Manager, or Power Manager but I am not able to find any such options/app on my laptop?
I bought a T510 few days ago and was surprised to see this machine has ridiculously low volume. I have tried everything including the tweaks in Smart audio and removing audio limiter but still the volume is very low. On my dell 1525, I never go past 40% volume on my headphones but on T51o, I am using 90-100% volume to watch videos on live streaming websites.
Is there any solution to boost the volume on T510? My system is with windows 7 ultimate (64-bit) and audio device is Conexant 20585.