when you put your laptop into standby, does your DVD drive still work, as in, can you press the eject button on the drive, and it will turn on and activate the ejection mechanism? Shouldn't this normally be off?
View 3 RepliesI just had a new motherboard installed in my E1505 under warranty by a Dell Tech. They sent a new hard drive with it, with Windows XP already installed. I also still have my original hard drive. After the motherboard finished installing, my Standby no longer works...
actually it goes into Standby, but immediately wakes up, without me touching a single thing. Also, I can't lock my computer by pushing the Windows logo + L. Using that shortcut actually logs me off the user. I tried this with both the new hard drive and the old original one. Both of these things worked fine with my old motherboard.
I did a clean install of XP on the new hard drive, and still it doesn't work. So far the Dell tech that I've been talking with online and on the phone doesn't have the answer. I've been talking to him for several days now
I have a new X240, and the fingerprint logon no longer works after the computer resumes from standby or from a lockscreen (screen saver). I have checked other solutions here and in other sites, namely:
1. unchecking the power option of the fp reader in device manager,
2. and switching the 30-day standby in Lenovo Settings
Neither of those solutions have worked. I have the latest BIOS and FP driver versions. I made sure the the FP was enabled in BIOS, and I even switched the settings to allow internal FP reader only. Still, the FP will only work when I first power on the laptop, but not after resuming from stand-by. I have checked in Device Manager after manually entering the password, and it says that the FP is working properly.
It can't read DVDs, nor CDs nor (obviously) write to either media. That's a first. And I've bought entry level laptops before (for others ) - but I've NEVER had this problem before. $2,000 sure doesn't buy what it used to.
Windows Explorer can see the drive and it definately has power, but there's some sort of defect that prevents reading or writing (I'm guessing either the optics or the laser emitter). Either way, now I have to wait about a week for someone to show up on site to replace the optical drive.
Seeing as how VAIOs drain power even while powered off, what do you guys think about leaving it on standby permanently vs shutting down? That is, is it worth it to shut down at all
View 10 Replies View RelatedI finally bought my Z series and trying to clone my HDD to my SSD using Acronis True Image with the SSD being on the outside of the computer using USB.
When it reached 80%, everything shut down as If the computer went into standby mode with the power light intermittenly turning amber. I turned it on again manually but the screen stayed blank. So I have to redo the whole cloning process again. it happened 2x already?
My Thinkpad never really went into sleep mode during cloning.
I have a Vaio Z4. I upgraded to Windows 7 Ultimate 64 bit with all available drivers.
I recently run into the problem that when closing the lid, that the notbook does not enter standby mode as it should. It keeps on, screen black, and no response to anything... if this happens, I can only turn it off and on again.
the Matsua UJ-225 the only BD drive that will fit in XPS1530?
View 5 Replies View Relatedever since I put on Windows XP when I first got my M1330 DVD drive does not work? it plays DVDs but does not burn?...burns CD-Rs just fine...
View 4 Replies View RelatedI received an SSD I purchased from amazon today but realised I have no Windows 8 DVD, so I'm not sure how I'm supposed to make it my boot drive and put Windows on it if I have no DVD. What are my options ?
View 3 Replies View RelatedDell have sent me a replacement one which boots up fine, but I'm trying to get the old hard drive in my dead laptop to work in my new one (its better - western digital, 320gb 7200rpm). When I boot up with it in, I get the BSOD which says:
a problem has been detected... tech info: STOP: 0x0000007B (0xC958ABB0, 0xC0000034, 0x00000000, 0x00000000)
When I run the windows dvd to repair, it says it can't repair with th following error:
Root cause found:
Unspecified changes to system configuration might have caused the problem.
Repair action: System files integrity check and repair
Result: Failed. Error code = 0x490
Time taken= 275935ms
All checks before this error pass. Safe mode brings the same error. When I run dell diagnostics, I get this error:
error code 0147
msg: error code 2000-0147
msg: unit 0: optical drive BIST - OPU test failed .....
This is absolutely crazy. The laptop came back to me in worse shape than it was sent off. C drive was wiped, several very large scratches that were not there before, and the CD drive simply does not work. I tried loading in a CD-R at first, and it didn't recognise it, though it might be the CD. Having the CD in at startup actually slowed down the whole boot sequence immsenely.
Since then I've tried it with several different CDs, DVDs, whatever and none of them work. The DVD drive just chugs a long and never gets anywhere.
I can't afford to send this back to be fixed now because 3 weeks was an insane time for me to be without a laptop. How costly/difficult would it be for me to replace the DVD drive myself?
[url]
THis is the noise it makes
Will it work? If so I'll be buying it
http://cgi.ebay.com/ws/eBayISAPI.dll...m=170307003375
I'm trying to install a CD-Rom game (Dawn of war fyi) on my Studio 1537 but when I insert the CD in the computer nothing happens.
When I go to "My Computer" the drive reads "BD-ROM" (What does that mean), and if I click it nothing happens.
The screw that holds the bracket in place at the top of the compartment, I stripped it.
I used the correct screwdriver but the screw is too tight. I am going to use a drill with a tiny drill bit to see it that will spin it.
Does anyone know if hard ware stores sell screws as tiny as those? I want to replace the screw but can't seem to find it at the Rona.
This computer is 6 months old. It came with Windows 7, and I did install Windows 8 in October 2012. I have had problems ever since and neither Dell nor Microsoft can support. ANYWAY, until today, my DVD/CD player worked just fine. I used it every few days, but today when I went to use it, the door would not open. I notice the light next to the Open button is not lit up, but my device manager says it is in working order and the driver is updated.
I tried Ejecting from the device manager, but it does not work. When I ran the Dell Diagnostics program, it said that it was unable to run the diagnostics when there is media in the drive or the door is open. There is a game disc in the drive, and the game works, but I think it is downloaded onto the computer, so maybe does not use the disc during play?? How can the drive work and not the door? Is there anything I can do??
I have an HP Pavillion dm4. My hard drive died so I installed a new hard drive. The original OS installed on the computer was Windows 7. I did not get a Windows 7 disk with the computer. If I order the Windows 7 recovery disk from HP, will it install Windows 7 on my new hard drive? I have the COA info.
View 3 Replies View RelatedAfter turning on the laptop, the CD/DVD drive doesn't work though I push eject button and I can't insert a CD / DVD, but after executing "run test" from Pc checkup / My Dell support center it works ( ejects for inserting CD /DVD ) - The Drive is TSSD corp DVD +-RW SU-208 BB.
I have called Dell technical support for 2 times and even they updated the bois ,.... but still I have the problem.
I installed a Samsung 840EVO 500GB SSD in my Precision M4400 last weekend. I managed to get it working but it only works in ATA mode. All others modes I tried brought me to the windows splash screen quickly followed by a blue screen that flashed so quickly I couldn't read it before the system rebooted. If I let it reboot it continues to do the same thing over and over. As I understand it I would really benefit from the performance AHCI offers, particularly when running multiple programs at once.
How I might get my drive working in AHCI mode?
I have an HP laptop (pavilion dv7-1245dx) and the hard drive died. I had never gotten around to burning my recovery discs, so I ordered new ones from HP. When I installed the new hard drive and popped in the operating system recovery disc, it gave me the error message:
"This PC is not supported by the System Recovery Discs. You will not be able to continue to recover this system with these discs."
Error code: 0100-30FC-3602-3603
The original hard drive was a Hitachi, 320 GB SATA
The new hard drive is a WD 500 GB SATA
The hard drive on my Pavilion 4070-us crashed, so I bought a replacement drive - a Samsung SSD 850 EVO, 256GB. The problem is that I can't seem to get the recovery discs to work, and neither Microsoft or HP support me. Microsoft of course tells me that they won't support for OEM versions of Windows 7, and HP said that my product has been discontinued. I own a legal copy of Windows 7....
What happens after I go through the installation process with the recovery discs is that instead of the Windows installation continuing like it's supposed to, I get "No bootable device -- insert boot disk and press any key". I'm desperate, I tried two different options - one was the minimal image recovery, the other one was a factory restore. Nothing seems to work. What can I do? By the way, the original hard drive is not *completely* dead - I can still access most of the data on it.
I have an HP Pavilion g6-1d21dx Notebook PC that was originally installed with Windows 7 Home Premium. However, the hard drive started acting funny, so an SSD was put in its place and Windows 8 was installed on it. However, now I want to go back to Windows 7 Home Premium. However, I heard that since the hardware configuration of the computer was changed (via the hard drive), the OEM key (which I still have), wouldn't take. Will it work or will it not?
View 5 Replies View Relatedwho opened I believe Z and connected a hard drive to dvd drive connector while leaving dvd drive in for cosmetic reasons. Can't find this thread. Where exactly can the hard drive go? Inside the tray?
I am afraid there will be too much vibration if I put regular HD there. For this reason I would rather put there SSD but is there a way to make this a primary OS drive? Seems like last bios allows to boot from optical drive.
Running Win XP on dv2000t. The Windows shutdown menu has 3 options which are RESTART, TURN OFF and STANDBY. When I click STANDBY the computer appears to turn off. I can't get it to turn back on except by restarting with the power button. Is there some special key combination I need to know? Apparently the computer shuts off when I click STANDBY.
View 3 Replies View RelatedHas anyone got the hybrid to work on a clean installed W7?
I cannot switch from speed to stamina without rebooting.
I got my new Sony Vaio NW 275 with blu ray and the ati 4570. I formatted the HD and installed a new copy of Windows 7 64 bit. I also have Powerdvd and Arcsoft total media theater. When I launch one of these programs it will start fine. But when I click the play button to play either a DVD or Blu-Ray the apps both crash everytime. And they are all patched up to the latest version. Am I missing something here? Did I not install something after I formatted?
View 3 Replies View RelatedCannot enter standby in the Studio XPS 1640, Windows Vista 64 bit.
Whenever I click on standby, the computer acts as if it will go into standby, but then goes immediately to the login screen again.
Does anyone know how much energy Dell's latest laptops use when in standby mode? I've tried looking on their website, but I can't find any definitive figures (I'm using a Precision M4400, if that helps).
Before I always used to hibernate or shutdown my laptop to save energy, but I'm curious if standby mode really uses much power or not.
i had this inspiron 1520 for a while now and everything is good but for the last 3 months,
my has been standing by when the bar hits 55%. i've checked the battery settings and it's supposed to alarm me when it hits 10% and only standby at 5% but idk why it's doing at 55%.
I just got my new M6400 and I cannot get it to goto standby or hibernate. I get the "Preparing to standby..." dialog and it just hangs there.
BIOS A03
NVIDIA 2700M 6.14.11.7653
XP Pro SP3 .....