Sony :: Error 320 And 330
Oct 9, 2009I am trying to recover my C drive but it stops at 32% restoring and then gives me these error messages.
What is the reason for this?
I am trying to recover my C drive but it stops at 32% restoring and then gives me these error messages.
What is the reason for this?
I'm getting this error window when I'm trying to do a full system recovery of my sony vaio z thru my recovery discs. When I'm near 17% recovery, it pops up this window:
ERROR: 305: 64
It prompts for OK then the screen just goes blank after that. Would I not be able to recover anymore?
I own a sony vaio laptop VGN-FZ21M which is 2 years old.
Since about a week ago it was running fine having formatted 2-3 times since i bought it but all of a sudden it stopped working. Whenever i push the one button to power it up, i get weird signs all over the screen and it crashes all the time! I get the BSOD (blue screen of death) saying there is a hardware fault and that it cannot start, yet after starting it in safe mode, i can then just restart the laptop and boot windows normally. I had a feeling it was the bios so i set off to find a way to reset it and this is what i did. I pulled apart the laptop and proceeded to find the mother board battery (or CMOS battery) and disconnected it for a good 30 minutes, then i reassembled the laptop with my fingers crossed and still with no luck. I formatted the computer with a clean partition and installed windows 7 with still no luck. I swapped out the hard drive and tried again, with again no luck.
I recently got a CD-ROM that was for the PCGA-DSM51 and other docking stations. The reason why I got this since my original CD-ROM isn't working right anymore. But the problem I' am having is that it says that my CD-ROM is "epson dl-v100 ieee 1394 sbp2 device"
I don't think Windows XP detected the CD-ROM right since it gives a code 10 error and can't start. I basicaly need help so I can make my CD-ROM work
right.
My notebook is the Sony PCG-R505ESP.
When I try to restore C: partition by using Restore C: Drive option with my Sony Recovery DVD, I always get Error 403 message. The other option, Restore Complete System works fine but that will wipe out all partitions in the drive. The Restore C: Drive option only wipes out C: partition and leave the other partitions intact.
How do I get Restore C: Drive to work? I have FW190 CTO.
I got Vaio FZ190 with faulty Nvidia chip, then i had my motherboard replaced. The problem is i cannot restore my C: drive using DVD i made. So, i tried hidden partition by press F10 and is also not working. Here is the code i got while i was trying to do so,
"Cannot use this recovery disc for this computer. Confirm the model number"
when I click Ok, this message appears
"error: CompareSnyIniToPacIni, Error: 92"
Then I click OK and it drops me back to the Vaio recovery centre and this cycle will happen again when I repeat to restore drive c.
Both DVD and hidden partition was working just fine before i had my motherboard replaced. I search all thread and find out that system recovery will check my BIOS before it can restroe my C: drive so i try to reset BIOS setting by pressing F9 in BIOS setting and it's still not working. Now, i can use my vaio just fine but i can't restore my C: drive.
This is what it said in my BIOS:
BIOS Version: R0050J7
Machine Name: VGN-FZ190
Serial Number: 9623323-3000004
UUID: 96a11200-f896-11de-8128-0024beb312c0
I had recently upgraded my RAM (laptop in sig.) from 2GB to 4GB. Now, once in a while when I boot up, a POST BIOS "Error 0232: Extended RAM failed at address line 21" error message is displayed. I can then either boot normally or enter the BIOS setup and the OS (Win 7 64-bit) is working normally and recognizes all 4GB of RAM. I dual boot with Vista 32-bit, which uses 3GB of RAM.
I did the Windows Memory diagnostic upon boot up and it didn't find any error with the memory. I searched online without any conclusive solution.
I purchased a Sony Vaio FW21E ten days ago and have had nothing but trouble since bringing it home. Firstly - wireless connectivity: It would not connect to my university server so I took it to a friends house - would not connect to her router.
Tried a different router - still no connection. I can connect to the internet via ethernet - but this is supposed to be a wireless device.
When trying to access some websites and my university e-mail I get the error: Microsoft visual c++ runtime library Crogramfiles/internetexploreriexplore.exe
and ie crashes.
Last but not least - and this one takes the biscuit. I bought a sony rechargeable mouse to ensure that it was compatible (model number VGP BMS77). Not the cheapest option but I thought it would be best. The Mouse will not pair with the laptop! I get the error message 80070057.
As said before - this is a brand new laptop and I haven't got a clue how to fix any of these problems.
Since the past couple of days I am receiving this Error 2102: Detection error in HDD2 during every cold/warm boot. It pops up even after a complete powerdown for overnight and boot up the next day. Further, the boot itself has become very slow - shows blank screen until the Thinkpad logo is displayed, followed by which the error message pops up.
Thinkpad Edge E530 - i5-3210M -upgraded 8GB RAM - 750 GB, 16GB mSATA HDD Performance Booster
I got my 430s, and it's with a 16Gb mSATA SSD cache inside. Now everytime when I open my PC, it shows Error 2101 Detection error on HDD2 (mini sata) and I need to press ESC to continue. Is there any software or driver's problem, or it just phsically got wrong?
View 9 Replies View RelatedAlright so i have been trying to upgrade from home premium 64bit vista to W7 with my upgrade disc and i am out of idea. Every time i try to run the upgrade i get an error saying
"Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available and restart the installation. Error code: 0x80070017"
I recently updated my bios and decided to do a new full install of Windows 7. (Previously running Windows 7 Beta).
After doing a clean install and installing the Sony Notebook Utilities. I started getting this pop up message.
"The installed battery may not be properly connected to the computer or may not be compatible with the computer.
Click OK to enter Hibernate Mode, and remove reinsert the battery
See the electronic VIOA(R) User guide for more information about using the battery"
At first I thought this was an issue with Windows 7 - so after searching the forums and no results I figured I would revert back to Vista. Now I am getting the same error.
I also have two Sony Notebook batteries here - both bought direct from Sony. One extended and one standard - both give same error message.
Could this be a BIOS issue? Is there a way to revert to an older bios?
Is anyone else getting this?
I've been trying to access various pages under "My account" and am getting this error for the last week.
The phone support has no idea and is not helpful with this.
Is it just me or a general error?
HP dv7-3065dx Entertainment Notebook. Win 7.
HP battery alert system detected battery capacity to be very low error 601 (internal battery). So I changed the cell to a new CR 2032 battery. Showed the same error. I changed to another new CR2032 battery. The second time I did this I had a new 502 CMOS error along with the 601 error. My clock reverted back to 2009, I lost some of the icons on the lower right, and my wireless internet disappeared.
Now I have two things that need to be fixed.
I turned on, immediately hti ESC, hit system diag. F2, Battery Test:
Battery Test Primary FAILED (on the first battery I put in, didn't check on the second)
Control - Device Mgr. - HP - Batteries - Microsoft AC Adapter, Microsoft ACPI Compliant Control Method Battery, and Microsoft Composit Battery all show that they work.
System CMOS/realtime clock says its working.
Microsoft System Mgmt. - BIOS Driver v. 6.1.7601.17514 from 6/21/2006 says it's the latest version.
I've manually updated my clock. I'll figure out the wireless and icons later I guess. Just need to know what to do about the errors.
I just got my new system, and wanted to remove the crapware before creating my recovery disks. I did that, then ran the Sony utility to create the recovery disks. I did not install anything.
One thing I uninstalled was SQL Server. I have no need of it.
Building the recovery froze at various stages of completion... 44%, 27%, 21%. I got an alert with the error, "Failed to start database service". I finally caught that error right away and dismissed -- then the system finished building the recovery disks.
Great -- now I have to wonder, are the recovery disks even valid?
Also, what database service does the system want, and what process wants it? I now get this error at arbitrary times. Sometimes on startup. Usually whenever I do anything with install/remove programs. So is this some new Windows 7 enhancement to the registry? Have I created a time bomb in my system by deleting SQL Server? If Windows 7 needs this, why did it let me delete it?
So far I wish I had a DOS machine. It's unfortunate that my work requires me to use Windows -- the OS treats me badly, and I can't use my new machine until I can predict whether the initial setup is valid.
i have a 1705 with 7900gs. ive been getting alot of nmi errors nonparity memory errors. so i replace my old mem stick with two brand new ones. well this did not solve the issues. so i reflash my 7900 back to default and still getting this error. i reformat my machine often so im pretty sure the os is affecting it.
View 15 Replies View Relatedi have a Sony VGN-AW31M/H and the Vaio Update site says there are 2 updates available, a WinBD one and a bios update. When trying to download either of these, a small download window appears with 0/xxxxxxxx bytes but no progress happens. Eventually it times out with the error above.
I have tried resetting IE cache, deleting the C:update folder, adding the vaio update exe to the windows firewall, im not sure what else i can try.
i will once in a while get these runtime errors. it seems like it pops up whenever i am in windows explorer. it then has to close it. i can not get a screenshot of it.
View 15 Replies View RelatedI'm a Dell Studio 1535 user. I have been getting a lot of "atikmdag" error since I got my laptop. It often happens especially when I'm playing video files. I have tried installing many versions of ATI Mobility Radeon drivers but to no avail. Is it possible that my graphic card is faulty? Should I contact Dell regarding this matter?
View 5 Replies View Relatedi just installed win 7 and it's really amazing, but i have an issue with 7loader 1.5
My win7 is v 7600.16385.090713 Home Premium
After installation i turned off the UAC and started the 7loader and did all the procedures. But when i restarted win wont start and remained with the promt command flashing and nothing happens.
i had more than 10 bsods now and the time period was as follows.
~5 bsods and solved by updating graphics drivers.
now, like 2 weeks later, it has been running fine and i decided i want to update my graphics driver by manually modding the inf file in the latest desktop drivers..
it did work out, but now it's giving me bsod errors everytime i close my laptop and come bak later to open it.
i also recently (today) installed a new realtek PCIe family controller driver..
so i dont know which driver is causing the bsod (0x50 non-paged fault)
right now my gfx is on 8.661 (found on a website, but WHQL certified)
I'm getting a stop error very frequently with my new sxps 16(running vista 64-bit).
I think it has something to do with the audio b/c it only happens when I'm playing an audio file in windows media player ......
I have a few questions to ask those who have this laptop.
I currently have a 1330, and I am experiencing the dreaded nvidia GPU error and I have an engineer visiting me on Friday to replace the motherboard. I do not think this will fix it, as I have seen others who have had to have multiple replacements.
Therefore, I am thinking of getting a new laptop, and love the look of the Studio 13.
Can you confirm the following:
1) The Studio XPS 13 is not affected by the nvidia faulty chips?
2) I experiencing "popping" during audio playback which is not resolveable, something again to do to with hardware. Does this laptop suffer the same?
3) To your knowledge, are there any design flaws or problems with this model? I don't want go to through the same again
I reformat my Dell inspiron 1520..first i installed the dell media direct and install the OS..
then i installed the driver...then after that my laptop keeps on having error..it says an error has occured..
windows will automatically shut down to prevent damage..keeps on having error..i dont know what to do ( help pls...i must use the safe mode to prevent this error
I get an error, just says Error 15 when I try to boot using Latitude ON. Anyone else have this problem?
View 3 Replies View RelatedI was reformatting my iPod the other day and I left the house to go run some errands and when I got back I was greeted with the BSOD. So I just restarted my computer like always when suddenly I was greeted with this:
PBR 2... done
A disk read error has occurred
Press Ctrl + Alt + Del to restart
So I pressed Ctrl + Alt + Del and got the same message. About 5 times later I was able to run some sort of diagnostics and it was showing something with my HDD. So I tore my computer apart and put everything back in just to see if that would work and I'm still getting the same.
Am I just screwed out of my 20GB of music and all those programs that I had on my computer or is there some sort of fix to be able to recover the data? And will I just have to cave and get a new HDD?
I have a Dell Inspiron E1505, XP OS.
My computer has been working fine until recently. Suddenly, my touchpad started to lag. It starts to jump everywhere whenever I move it.
My keyboard is very unresponsive, I can't even hold down a button for it to read it would read only once and sometimes it doesn't read the letter I type. It took me about 10 minutes just to type this whole thing up.
To sum it all up .....
I'm using xps with vista home premium, suddenly, I was not able to connect to the internet via Huawei e220, I googled out and find some thing called rarepair.exe and I run it then in device manager see the picture.
Also the error 720 appear when I try to connect
I don't want to re install windows
Acer 5920g with 8600m gt 2gb vista.
Many full screen games go black after an unkown period of time.
The game freezes and will not recover, background music can still be heard. The ! tray icon tells me display has had an error and recovered.
Happens with Crysis, Assassins Creed, and Mass Effect.
Regular use, applications, COD4MP and older games are unaffected.
I initially was under the impression that this was due to TMM looking for alternate displays, but it since has been disabled.
This was happening with released drivers, updated to 177.92 and the issue was not resolved.
It is unpredictable, games run smooth until crash. Temp is usually kind of warm but nothing extreme, low/mid 60c at time of crash.
The niece brought her Acer Aspire 3680-2682 laptop to me it would not boot to windows, after POST getting an error message:
Windows could not start because the following file is missing or corrupt:
system32hal.dll
Please reinstall a copy of the above file
but before that, when I power on the unit, it says:
Please select the OS to start:
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
Strange thing with the above is that this is supposed to be a Vista unit so why are those OS showing up? Anyway when I try to reload the OS, I am getting this error:
Installation was cancelled
Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available and restart the installation. Error code: 0x80070017