When I try to restore C: partition by using Restore C: Drive option with my Sony Recovery DVD, I always get Error 403 message. The other option, Restore Complete System works fine but that will wipe out all partitions in the drive. The Restore C: Drive option only wipes out C: partition and leave the other partitions intact.
How do I get Restore C: Drive to work? I have FW190 CTO.
I've been having some difficulty with my vaio and am thinking about doing the F10 Vaio Recovery to restore the C: Drive. I'm not all that computer savvy, and would like to know from those who have done this what to expect. How does this work? What happens? Will I have to reinstall windows along with everything else?
View 3 Replies View RelatedReceived new 5748 laptop today. Made a bootable factory restore disc + external hdd boot up image. Removed the 1TB hdd that came with the laptop and installed my Samsung 840 SSD. Keep getting an error trying to do the restore onto the SSD.
How I install windows 8 on my SSD with no installation cd as it was not provided with the laptop.
I've tried to restore system to factory default by pressing Ctrl+F11 in my XPS M1210. After confirmation to proceed I got the message: General failure error 36000.
I re-installed Windows XP but I'm having troubles with drivers not installed by the Windows re-install process.
My wifes Extensa 5620 got a virus. Office Depot removed it with MalBytes. I'm still leary of something being missed. I would really like to restore it to factory defaults.
When I go into Acer eRecovery Management I see pick the Restore tab at the bottom of the window.
Now I am given the choices to
1.Restore system factory default.
2.(Which is grayed out and option not avaialable) Restore form users backup
3.Recover from CD/DVD
4.Reinstall applaications/drivers.
So I pick 1. Restore system factory default.
Next I am asked for the empowering technology password. Well I don't have it and don't know how to get it. I would choose number 2. if it were an option. If I place the disk I made into the CD/DVD unit will the option become available? I tried option 3. and it said to place the restore disk inthe drive.
The hardrive on my dv6-2174ca has died and so I will be replacing it. However, I do not have an install disk for Windows 7, everything was on the now dead drive in a partition.
What do I need to download or purchase from HP? Does HP sell a recovery disk or OS install disk?
I have OKR working for me beautifully. However, when I choose "System Recovery", it only presents me with selecting from C: or D: (partitions on the only internal HDD). It does not let me choose backups that it itself created on my external USB HDD ( F: ).
How do I tell OKR to select a backup that it created on an external USB HDD?
My high school-age son was working on an English paper when something fell off a shelf and whacked his Aspire 3680 right above the hard drive bay. It started clicking and finally crashed.
The computer won't run with the hard drive installed. It makes nasty clicking sounds trying to boot, and finally beeps and powers off. Without the hard drive, the laptop powers up and runs BIOS just fine.
We can buy a new hard drive, but it seems awful to pay Acer another $20 + $10 shipping for the Vista restore disk!
I own a HP G72-130SB Productnumber VY062EA#UUG
My hard drive has crashed. My restore DVd is damaged. I installed a new windows 7 64 bit.
The graphics drivers (ATI HD 5430) is not installed. Can't find the driver. The latest ATI drivers don't work.
I need the original. HP don't give support anymore on their website.
Only a page with specs of my laptop. No drivers.
Im only just burning the factory DVD restore of my system via Acer eRecovery Management. I should have done this a long time ago right when I first recieved my laptop. What ends up on the factory restore DVD?
Another question, my laptop really has noticably slowed down since purchase. I know this is natural...especially as I currently have lots of games installed...only 9GB currently free on C.
This free space varies drastically day to day as restore points seem to automatically be generated by vista. I think this automatically takes place when vista downloads and installs updates. How can I change this? It's annoying as I have a consitently fluctuating amount of free space on C..I frequently delete these points using Tune Up Utilities 2008 which brings me back to the norm.
Also, the D partition seems like a huge waste of space to just leave as it is. There are 103GB free on this partition with only two windows folders existing on there. I have never touched this partition thinking it is there only for disaster situations, like if vista dies and wants to make an image of itself here.
Is this correct or can I move other files onto this partition? Will this increase performance?
Im just trying to increase the speed of my laptop day to day workings. My girfriend was saying that the D partition can maybe be somehow partitioned to speed up the laptop?
The only reason I purchased my xps m1710 is that I thought it was the top of the range model at the time, now all I want to do is replace the hd but at the same time retain all the functionality of the hidden restore partition and the media centre partition. You would expect Dell would make this easy for me as the owner and as Dell market themselves as providing user friendly IT solutions.
I have tried using trueimage to clone the drive but when trying the new drive on boot up it gets to the Dell 'blue bar' then freezes. I have tried copying partition by partition but this is even less successful.
I have tried restoring the restore 'ghost' image to the new hard drive but symantec ghost reports incompatibilities with the image file.
I am upgrading my original Samsung hd (SATA) to a new hd and would like to keep the hidden partition and mediacentre partition as my original hd. I have a new SATA hd which is currently connected in a USB enclosure. I am not a hd or filesystem expert and don't want to spend a year studying the goodells website.
HP Elitebook 8460p will not recognise the DVD player. If I go to control panel under Device Manager, the under DVD/CD-ROM Drives it shows hp DVD A DS8A5LH and has an exclamation mark on the little icon.
If I right click and under General it shows the message "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"
I have tried unistalling and then re-installing via "Scanning for hardware changes" all to no avail. It still gives the same error. I have tried to update drivers and states that driver is up to date.
Getting the following Error Message while ejecting the dvd drive from my computer..
"save any open files on this disc, and then close the files or programs using the files before ejecting the disc"
The eject works fine when performed manually.
My Nero also does not detect the Drive as a result I am unable to burn anything
My drive is working properly at the moment but has this error (video here) and it seems critical.
I have already backed up important files.
The model is Inspiron N5110 R15 and it's the stock hard drive.
using my unmodded 9300 and shut down for the night. This morning, when I tried to reboot, the process would get to the Windows splash screen, then flash a blue screen so fast I couldn't read it, then go to a black screen that gave me 5 options to start windows. No matter which one I pick, the same process happens again.
I videotaped the blue screen and it reads: a problem has been detected and windows has shut down to prevent damage to my computer unmountable_boot_volume and then it gives me unhelpful advice on how to fix the problem.
I ran the Pre boot system assessment and all items passed. Then I ran the Dell Diagnostic Utility for "unable to boot O/S" with the following results: HD Read Test error: 00F0:0244 and HD Verify Test error: 00F0:1A44. Both of these were on sectors in the middle of the volume and I canceled both tests after about 10 errors. All other memory, graphics, and HD tests passed.
I tried booting from the XP CD and repairing from the CD with no change. I ran chkdsk /p and it found one or more errors on the volume.
bootcfg /list gives me: there are currently no boot entries available to display.
What are my best options on trying to recover this without losing data? I have a fairly recent backup, but would like to try to save what's on the HD. Parallel install? What is fixboot used for?
Dell lists my drive as: M7601 Hard Drive, 60GB, 9.5MM, 7.2K Hitachi, Ibm Moraga
What is the drive of choice to replace this if I need to?
it is giving me fixed hard drive park error 0200:
I opened it up, looked at the IDE connectors very closely and they are good, tried 4 drives so far, run LIVE Linux fine as long as there is no hard drive in, the thing is, It does shows the drives in BIOS thou, and using F12 boot menu, hard drive is in the option.
My HP G62-b23SA reports a imminent hard disk failure. Hard disk test reports SMART Error (301). Advised to back up the system and contact HP support to enquire if Hard disk needs to be replaced or just needs repair. I have since backed up the system, should it be replaced?
View 5 Replies View RelatedI have a disk error on my XPS15Z. I ran a diagnostic and got:
Error code 2000-0142
Validation 534
Msg: Hard Drive 0 - S/N WD-WX11EC1F3775, self test unsuccessful. Status = 79
Do I have to replace my hard drive and if so, can I send it to get replaced? I am still under warranty.
Ok I have a Dell 3521 Laptop and the hard drive went bad. So I have replaced the hard drive and did diagnostics on it and everything went fine. So I put in my burned copy of the back up and it started running. It got half way through then gave me a hard drive error. So now I am stuck what is going on with this. I just want to get my laptop back up and running.
View 2 Replies View RelatedI lost the restore partition on the original SSD that my Yoga 13 shipped with. Is there a collection of drivers and whatnot that would allow me to restore it to factory defaults on my own with a fresh windows installation? I have the win8 key from the BIOS but don't want to lose out on all the required drivers if I were to just reinstall windows myself.
View 1 Replies View RelatedJust to state first and foremost, this is not an issue I have. This is a preventative post for anyone that may ask down the line. (as I've seen it asked on multiple other forums.)
I had this issue with an inspiron 1720 I just got. It had an issue, so I installed vista from a Vista RTM disk. It didn't fix the problem in the end, so I sent it into dell and got fixed, but I wanted to a fresh restore from the restore partition because on restarts, I'd get the blue screen of Death. Fun stuff right?
Well, Unknowingly, when I installed vista off of the cd, that removed the ctrl+F11 option from the dell. This is stated on many forums, and it seems that most answers to this issue is to format and install a fresh install from cd again, or call dell and get recovery disks. I figured "Heck, If I still have the restore partition, there is not reason why I can't get it to restore with some effort."
Some other people I've seen have just had viral attacks, or just want to sell their laptop and need a fresh install. This is for those people that need it. The answer to the question of what if Control and F11 don't work.
So, Here I am with the fix. There is one required bit of software that's required, and that is simply a dos boot cd. You can find many iso's for dos on the net. All you have to do is burn a copy and boot from it. [EDIT] IMPORTANT: I was wrong about dos. As stated below ( http://www.notebookforums.com/post3049150.html ) you have to do it from a 32 bit environment. You can get through one in the XP repair console (on the install cd) or through one of the options in vista's setup.[/EDIT]
Ok, so this is going to be dumbed down a bit, and I'll explain what the dos commands do. First off, after booting into dos, you need to change to the restore partition. This isn't hard at all, all you do is type "D:" and press enter. After this, you need to find the restore file. This is a file with the extension of *.wim. This is an image of windows from dell factory.
Generally this file is found in d:dellimage and is called Factory.wim. Just to double check, I'm going to tell you to change the directory. Type in "cd dellimage" and press enter. In dos, CD means Change Directory (or enter a folder). Now, to list all of the files in the directory type in "dir" and press enter...............
Just installed a new har drive into my Compaq CQ57. Ordered the recovery disks from HP. Put the first disk in disk drive as instructed and turned power back on. Now I'm getting a "No bootable device - insert boot disk" message. I thought that was what I had gotten from HP? how to recover system and then reinstall Windows 7?
View 1 Replies View Relatedi am using an inspiron n5110. (western digital)
i am getting an hard disk error code while running diagnostics: 2000-0151 validation: 18339 incorrect status = 3E.
when i inserted the hard disk in PC it somehow managed to boot with the os(w8) in the hard drive.
Any how the hard disk response rate is little slow. but in my laptop it stops with BIOS and doesn't proceed further.
Is it a hard drive error or some problem in mother board.
I got a hp Pavilion g6-2005sd laptop and I have some freezing issues. My laptop is lately randomly shocking. The screen is freezing and continues normally. But if I run multiple tabs browsing the net it is more frequently. I have run some tests with hp of hardware diagnostics and hard drive errors. But I don't know how to fix it. I got the error : [URL] .....
View 7 Replies View RelatedI have a Pavilion M6 1045DX laptop and the HD crashed. It was 750GB so off to eBay I went to buy another one. I decided to buy a NEW SEALED HD so I bought a blue label WD brand new. (March 2014) Just for grins I wiped and verified the drive and it passed. I temporarily installed a 40GB hard drive to build the machine while I was waiting for the new drive figuring I would just clone it when it arrived. When I went to clone the test drive to the new drive I received an error about block sizes. I use the Apricorn DriveWire and have seen this on a rare occasion. I thought maybe a different cloning software would work but to no avail. Same error.
Rather than fight with it I decide to put the new 750 drive in the laptop and build it all over again. This is when I received this error.“Windows setup could not configure Windows to run on this computer's hardware”So, I grabbed another blue label 160GB WD drive and it installed Win 7 fine on the laptop. I then took the 750GB drive and installed in on an old IBM T61 and it too installed fine. I also installed the new 750GB drive on a Dell inspirion N5040 laptop with complete success. Why the new 750GB WD drive gives me this error on "only" the HP Pavilion M6? This laptop doesn’t have RAID and was NOT Built for windows 8. It came with Windows 7. And yes I’ve reset the bios back to factor standards!
Recovery software disapeared from drive d in windows 7 on presario cq62 209wm. How do I restore the program?
View 1 Replies View RelatedI just need a quick verification about something. My FZ21S recently bit the dust due to that nVidia error that Sony in all
fairness repaired free of charge when it happened a few weeks back (out of warranty also).
Now very recently my screen overheated causing some damage apprantly this was due to the graphics card again but this time even though they will repair
the motherboard free of charge again, they will charge me for the screen....756 .....
I have a Inspiron N7110 that is failing the hard drive diags with error 2000-0142.
I assume the drive needs to be replaced. Is this the case?
On the start-up diagonstic the error code 2000-0146 came up. The computer is booting fine, though sometimes does not shuts down properly. Should I look into getting a new hard drive right now. Is it going bad?
View 15 Replies View Relatedmsg hard drive
0-S/N WXN1E53EN501
Short self test unsuccessful
Tried other diagnosis, no joy