i just installed win 7 and it's really amazing, but i have an issue with 7loader 1.5
My win7 is v 7600.16385.090713 Home Premium
After installation i turned off the UAC and started the 7loader and did all the procedures. But when i restarted win wont start and remained with the promt command flashing and nothing happens.
my dell inspiron laptop model n5030 will not start. when you turn it on the startup repair window comes up. after the diagnostic runs it says windows cannot repair this automatically. my warranty expired this past august and now my laptop died. how do i restore my laptop when the system restore partition does not work? it just says. boot manager failed to find os loader error code 0x3. and it also says boot configuration data store repair failed. error code = 0x2. then the laptop shuts off. what should i do? i have only had the laptop a year and a half. do i need a new one?
View 4 Replies View RelatedI have a y410p with windows 8 on it. I recently installed a debian based linux alongside windows so I can dual boot them.This required me to also add Grub to the the disk. But grub was in legacy mode and i had problems booting up win8. So, I used boot-repair to try to fix it, but it seems to have gotten worse.
View 3 Replies View Relatedthe enter key on my windows 7 latitude E6510 is broken and i am unable to pass the resume loader screen by clicking enter. I tried cleaning underneath my keyboard with no luck.
View 1 Replies View RelatedWhen I switch on my Latitude D800, which I've just fitted with a new hard drive (Samsung), a box telling me that new hardware has been found and TI ultra media firmware loader device is being installed. All is well until the box disappears and then the system freezes up. I don't get much time to anything and am really struggling with it.
View 1 Replies View RelatedI am hoping to buy an HP Envy 15 j102saI want to fit an mSATA SSD as well as the hard drive1. Does this model have a free mSATA bay?2. Is it possible to boot off the SSD and will it require a boot loader from the HDD?
View 2 Replies View RelatedSince the past couple of days I am receiving this Error 2102: Detection error in HDD2 during every cold/warm boot. It pops up even after a complete powerdown for overnight and boot up the next day. Further, the boot itself has become very slow - shows blank screen until the Thinkpad logo is displayed, followed by which the error message pops up.
Thinkpad Edge E530 - i5-3210M -upgraded 8GB RAM - 750 GB, 16GB mSATA HDD Performance Booster
I got my 430s, and it's with a 16Gb mSATA SSD cache inside. Now everytime when I open my PC, it shows Error 2101 Detection error on HDD2 (mini sata) and I need to press ESC to continue. Is there any software or driver's problem, or it just phsically got wrong?
View 9 Replies View RelatedIs anyone else getting this?
I've been trying to access various pages under "My account" and am getting this error for the last week.
The phone support has no idea and is not helpful with this.
Is it just me or a general error?
HP dv7-3065dx Entertainment Notebook. Win 7.
HP battery alert system detected battery capacity to be very low error 601 (internal battery). So I changed the cell to a new CR 2032 battery. Showed the same error. I changed to another new CR2032 battery. The second time I did this I had a new 502 CMOS error along with the 601 error. My clock reverted back to 2009, I lost some of the icons on the lower right, and my wireless internet disappeared.
Now I have two things that need to be fixed.
I turned on, immediately hti ESC, hit system diag. F2, Battery Test:
Battery Test Primary FAILED (on the first battery I put in, didn't check on the second)
Control - Device Mgr. - HP - Batteries - Microsoft AC Adapter, Microsoft ACPI Compliant Control Method Battery, and Microsoft Composit Battery all show that they work.
System CMOS/realtime clock says its working.
Microsoft System Mgmt. - BIOS Driver v. 6.1.7601.17514 from 6/21/2006 says it's the latest version.
I've manually updated my clock. I'll figure out the wireless and icons later I guess. Just need to know what to do about the errors.
Was using the Acer Arcade and was informed about the latest patch by the Live Update.
I ran the install patch and during install the McAfee informed me that two of the files were trojams and had to be removed. The files were CL26934.RRA and CLDO7416.RRA, so now when I stick my blu-ray into the drive I get an unexpected error from the Acer Arcade and it won't run.
So where did the files go, and why would ACER put out a patch that conflicts with the pre-installed anti-virus?
i have a 1705 with 7900gs. ive been getting alot of nmi errors nonparity memory errors. so i replace my old mem stick with two brand new ones. well this did not solve the issues. so i reflash my 7900 back to default and still getting this error. i reformat my machine often so im pretty sure the os is affecting it.
View 15 Replies View RelatedAcer 5920g with 8600m gt 2gb vista.
Many full screen games go black after an unkown period of time.
The game freezes and will not recover, background music can still be heard. The ! tray icon tells me display has had an error and recovered.
Happens with Crysis, Assassins Creed, and Mass Effect.
Regular use, applications, COD4MP and older games are unaffected.
I initially was under the impression that this was due to TMM looking for alternate displays, but it since has been disabled.
This was happening with released drivers, updated to 177.92 and the issue was not resolved.
It is unpredictable, games run smooth until crash. Temp is usually kind of warm but nothing extreme, low/mid 60c at time of crash.
The niece brought her Acer Aspire 3680-2682 laptop to me it would not boot to windows, after POST getting an error message:
Windows could not start because the following file is missing or corrupt:
system32hal.dll
Please reinstall a copy of the above file
but before that, when I power on the unit, it says:
Please select the OS to start:
Microsoft Windows XP Professional
Microsoft Windows XP Home Edition
Strange thing with the above is that this is supposed to be a Vista unit so why are those OS showing up? Anyway when I try to reload the OS, I am getting this error:
Installation was cancelled
Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available and restart the installation. Error code: 0x80070017
Just bought a new Acer laptop 5730z. (Acer Aspire 5730Z-322G16Mi)
At first, when installing windows vista premium I got an error 0x d000000D in the very beginning after chosen language setup.. Then the system restarted and tried to re-install(?) software or so..
Acer eRecovery Management
Restore partition
harddisk0partition2
When it had done it 80-90 %, it started all over again three-four times. It stopped always somewhere between 80-90%. It took 1-2 hours to get Vista installed on this computer, after several restarting. After I got Vista installed, then Windows-updates won't work. The system freezes always when trying to get updates. Browser Firefox crashes all the time, even task manager crashes..
Is the computer broken or is there something terrible wrong with vista? Maybe problem with memory? Motherboard? Corrupted harddisk, install-files? And yes, no cd's came with.. I didn't even manage to burn eRecovery dvd's (needed two disks). After one disk the eRecovery just stopped and said, that disk cannot be created.
i havn't used my DvD burner in aprox 3 month's and it was working fine with Nero 7 Premium. i have just atempted to burn a dvd when that error come up "Power Calibration Error" the dvd burner that i have is Matshita DVD-RAM UJ-845S. i don't know what to do. i am running a Aspire 5672WLMI
View 5 Replies View RelatedI used 2 X 2GB memory but on my BIOS it recon only 3.3 GB, but few days ago my laptop going nuts, my geforce 7300 go is falling.
after contacted my local acer service, and they examine my laptop, they found my mem card had no problem on it, and the upgrade my BIOS to clean up the mess but, my mem reduce from 3.3 to only 3 gb. it all at the bios mem check, not on OS. they said this laptop didn't support 4 GB memory, that's wierd, on this notebook spec it said up to 4 GB. not 3 GB.
so where the going wrong? since I already run this laptop with 4 GB ram and recon it as 3.3 gb and had no problem with it, for a long times, but after had problem with the geforce faling down it can't recon 3.3 gb after they fix it with upgrade the bios. I think the problem goes to the motherboard, if I goes to old bios the geforce is falling down, if I stay on this bios it's only recon 3 gb ram mem. they can't explain why this happen.
and the bottom line, you guys with acer laptop and using 4 GB ram memory should check at the bios, how much it recon, it as 4 GB or 3.3 GB.
since IMHO the OS never will be using 4 GB if the bios didn't recon it.
but there is some glicth if you look at the system information it recon 4 GB but, on bios it recon as 3 GB and the task manager recon it as 3 GB
It appears that the int15.sys driver was deleted from my computer (running Windows Vista) and now the machine is unable to boot up, even in safe mode. The Acer support folks say my only option is to pay someone to pull the information off of my hard drive, reformat (or recover, as they say), and then move everything back over. This will cost me about $100 and when the computer was only $400 and new two months ago, I don't want to spend more money on this thing.
From what I understand the int.sys driver is used as part of their eRecovery program but is very similar to a spyware or adware file. Therefore, when I was running Webroot's Window Washer program it deleted the driver. It seems like this may be an Acer specific driver and is not on all machines. Does anyone have any other suggestions besides the option Acer game me above?
A couple of ideas I have but would need more help on include:
1) If someone could put this driver on a jump drive or CD, could I tell the computer through command prompts to find the driver?
2) Would a Vista operating system CD be of any help to repair the driver? The support person said that I cannot get an OS CD from Acer, so is there someplace else I could find something like this?
3) I can reset the OS back to factory defaults, so I think the driver is still on there but the master boot record is corrupted. I do not know how to find the drive or update the master boot record.
During restore using Acer recovery disks for this Acer aspire 551, the recovery stalls at the final step where the wim file is written to the c: drive. It gives me an i/o error.
I suspect that the disk is functional because I have run the cmd.exe program from the x:drive and then run both scndsk.exe and scndsk.exe /F to fix any errors. No errors were detected.
However, any fix for this error that I have encountered suggests replacing the hardrive. This seems to be inappropriate, in this case.
I should also say that I have used dos commands to copy a file from the system32 directory to the c: drive successfully suggesting that there is no problem with writing to the disk.
Lastly, the cd rom hardware must be working or the disks would not be successfully read to the final stage. How this can be an i/o error eludes me.
I recently bought an Acer 7720 with Vista Home Premium, a few days after setting it up I would go to use the computer and find it had turned off. Looking in the event log I see event error 6008 "the previous shutdown was unexpected"
I sent that laptop back for a replacement, the other day laptop #2 arrived and again I am getting the 6008 error. I was watching a youtube vid yesterday and it just shut right off.
I have an acer aspire 5610 and am having a problem. Everything was working perfect then randomly one day it went black. When i log in it still has the windows sign and everything but when i am in the desktop it is black there is no start bar or Icons or backround. Basically my GUI is gone. but i can still see my mouse pointer. I found that i can run programs by opening task manager and clicking file and start new task then browsing on what used to be my desktop for the internet icon. this works and everything works as it should. but i get an error message fo most all programs other than internet.
i have attached screenshots of my desktop and of the error message that pops up.
at this point i dont care about salvaging the stuff on my comp just want to reset it back to factory defaults. I have tried recoverry CDs that were made and it doesnt recognize them, i cant get to eRecovery due to the error message
I've been getting the BSOD error on my PC. The main ewrror is 0x000000f4 but I sometimes get the 77 error as well. Most times i need to reboot and then I get the 200 fixed hard disk 0 failed error . If I click F! i get yet another error, PXE.61 error and this takes my rebooting quite a few times in order to get windows xp (media center edition) to come uo it stays on for a while (the length of time is getting shorter and shoryer these days) and then I have to go through the entire scenario over again. I'm trying to remove the files and programs that I actually care about off this comp. I contacted Acer tech support and was told that it most likely a HArd drive problem and that it would need to be replaced They had the wrong warranty ending date for me and after providing proof of purchase, they changed it to 11/23/07. Now that I have about 8 days left on my warranty. the tech support person told me to purchase the extended warranty because if I ship it to them and the warranty expires, I will have to pay for the service. Now my question is this. I'm not too sure that it would be worth shipping it to them for repairs I will have to pay $99 for the warranty plus tax and At least $100 to ship it back to them. On top of that I have read horror stories about people who sent their comps in to be repaired and it being returned to them with scratches on the LCD, initial problems not repaird or additional problems after the comp was returned to them. I'd much rather carry it in to a shop but was told their are no local repair shops in my city except for geek squad and they will charge me since I didn't purchase my comp from them. WHat would you do take it to a local repair shop or pay the bugcks to extend the warranty and then pay to have it shipped to be repaired? Another reason why I am leery is because I bought a HP laptop last year. the Ac adapter jack ont he comp was loose so I shipped it to HP to have it repaired. they had my comp for almost a month and then told me the motherboard, keyboard, speakers, and LCD display was unsalvageable and that it would cost me over $1000 to have it replaced(i only paid $369 for it on black Friday). They also told me that I had a liquid spill which was a total lie as I keep my laptop in my bedroom and I never eat or drink in my bedroom.( come to find out that loose jacks are a known problem with some Hp laptops I have read horror storeies about Acer using the dreaded liquid spill excuse too and I don't want to go through the drama again. Are the BSOD errors definitely the fault of a faulty hard drive?
View 7 Replies View RelatedI have just taken ownership of my new laptop. It has the bluray disc drive and has the HDMI slot so I purchased a new movie disc and a HDMI cable - plugged then into my HD tv and nothing!
I have tried starting the computer up connected and also not connected to the tv and it makes no difference. I have used the Fn+F5 key to switch from my screen to the tv and still nothing.
The only thing I get is some times an error message sysing graphics driver error but I would expect a new laptop with ATI radeon HD 3470 be able to cope with a blueray disc output?
I have an Acer Aspire 5100 series laptop running Windows XP home. Was wanting to use eRecovery Manager to make a full backup of my current system. I have two hard drive partitions, both 60GB in size. The C drive is almost full (onky 9GB free) but the D drive has 47.9GB free. On the "Make Backup Image" page it says that the estimated image size will be 43.96GB, and it shows the free space of the D drive as space available. The problem is that no matter what I put in for the Name of the backup, and no matter the number of characters in the save name, the program fails almost immediately with the following error:
Code:
it41
Too long directory path!
Error
Backup is failed
Error code = 0xF0000014
what I can do to fix it?
I have the Acer 3613WLMi, when I bought it I made a Boot Disk. I now have problems with it and wanted to go back to the Factory Settings. I went into the eRecovery and entered 000000 as a password clicked system recovery and asked for Factory Default Image. OK to destroy partition. Symantec screen comes up then I get errors.
Decompression error, Abort? Y/N if I say Y it just throws me out if N it tells me Application Error 19230 Corruption in the Image File. Perform an integrity check on the image. I have tried using the Backup Disk I did when I bought the machine this is not working.
I've been trying to change the sensitivity settings for my touchpad on my Acer Aspire 5610z using the Synaptics configuration utility.
When I goto the Device Settings Tab and click on the settings button i get this error: Windows host process (rundll32) has stopped working.
The Synaptics window whites out and when I click the close button it closes but the application stays in my bottom right taskbar and I can open it again.
I've uninstalled and reinstalled the program and it isn't helping.
I tried the generic vista driver on the synaptics site. Is there somewhere else I can adjust these settings? I'm really tired of clicking on things on accident because the tap setting is so sensitive. My girlfriends inspiron 1100 is five years old and her program works fine. Is this driver program not working because the version is designed for xp?
I have an Acer Aspire 6920 and I'm trying to to do the erecovery, everytime I try to create the disks I get a message saying
"Error Code: 1014
Burning Error, Please insert a blank CD/DVD into the optical drive and press OK to continue"
I have tried many different blank discs but I always get the same error. I have also red the thread on this forum where someone had a similar problem and I tried running my computer in safe mode but the programme will not run..
I have an Acer Aspire 5672Wlmi and recently my battery went completely dead. I went to the Acer website to find out that they are out of stock which meant that I am out of luck. A quick search on amazon gave me some promising results and a few days ago I bought a battery that is an equivalent of the one I need.
If I try to boot the computer using the battery I get an error saying that I have the wrong battery and I should insert the correct battery and press any key. This message is shown immediately after the Acer logo flashes momentarily during the POST so I guess this restriction comes from Acer's BIOS. Right now it seems my chances of having the right battery are as high as being able to find a key that says "any" o my keyboard.
However I know that the battery is fine because it runs fine if I insert it once the latop has booted. Even if I remove the power plug after that it runs just fine. Also the fact that I am able to read the message when the latop is running only on battery is sufficient to convince me that my battery is fine and my BIOS is wrong.
My questions is, what should I do to fix this problem? I have already contacted the seller but I thought you guys might know more about how to fix this. I guess it would involve flashing the bios which is fine with me.
If it matters for the BIOS version, the laptop was bought in the UK.
I have to either Launch start up repair or start windows normally. I've down the start up repair and it says that it is finished turns the laptop off and then restarts but when it gets to the boot up screen it just runs with the little bar with arrows going along for ages and doesn't progress so I have to switch the laptop off again which means next time I start it I go back to the initial problem.
I didn't get a recovery disk or anything with my laptop so not sure if there is a way of getting in and partioning the disk otherwise or rebooting the hard drive.
I just bought an Aspire 5535 and it came with Vista Home Premium. I want to get rid of vista and load XP on it. Problem is I keep getting a hardware error when trying to load XP. I went as far as pulling the HD out of the notebook and hooking it up to my desk top to reformat it, and try it in the notebook at that point, same problem, blue screen f death when it tries to start the windows installation. I then take it out of the note book again and partially load XP up on it from my desktop till the first reboot prompt, re-install it back into the notebook, only to still have the same problem. Is there some hardware issue that needs to be over come here or am I missing something obvious? Or even still, will XP even work on this notebook?
View 9 Replies View Related