[url]
I knew nothing of it until I made my icons big by mistake, then I slid my fingers back together and they went back small and I was like .
Pretty cool feature! is this new to the Vaio Laptops?
Latitude E7240 has Touchpad Alps. All works fine except settings "Flick" (Gestures -> Multi Finger Gestures).
This setting works, but after some time (random period) stops working. To fix this I need restart Apoint.exe or go to settings, deselect Flick and select it again.
My laptop's BIOS has latest version A11 and all drivers installed from web site Dell.
Also, I tried to install Windows 8 and Windows 8.1 with touchpad drivers only, but this did not solve problem.
I have a Vaio SR 190 and i'm trying to use the Google Code for two finger scrolling. I have a synaptics touchpad v7.0 with Driver 10.2.4
I have Chiralmotion and momentum enabled but the google code program keeps saying "Driver support for multiple fingers is already enabled but the driver still doesn't report multiple fingers
I love the hardware design of the XPS 15, except that the touchpad is unusable for scrolling. My old Latitude 6520 at least could use the scroll zones well, but with the buttons on the L521x being part of the touchpad, the horizontal scroll zone impacts button usage and isn't worth it.The big issue is the multi-finger scrolling jumps significantly when lifting fingers. I've tried every version of the driver I could find, and they all have this issue. If you make sure you completely stop scrolling before lifting fingers, then lift one at a time, I can usually avoid the jump, but that take more time than just using the keys to scroll.
Is there a way to either disable horizontal scrolling using scroll zones or fix the 2 finger scrolling to not jump? Except for that issue (and some sporadic wifi issues that my be fixed with newest driver), this laptop would be perfect for me.
I am trying to see if this is normal in my Vaio Z.
Apparently, our keyboard is structured in a way where we only hold down 2 keys, most of the time. For instance, when I have "W" and "D" key held down, pressing q, e, z, x, a will not be recognized.
I was wondering if this is true for our keyboards or do I just have a bad one? Can someone test this out with their Z
I have found out that the touch pad surface extends further than it should. I have a habit on leaning on my elbow,
when I have my laptop on my legs I put my elbow on the palm rests. I found out quickly though that if I lean on it I end up doing a multi touch zoom,
to start off with I thought my system was just being rubbish but then I tested it again and it worked fine after I took my elbow off.
This must mean that the touch surface extends further than the edge of the "touchpad",
I just wonder how far it actually goes and whether we could make use of it .
Is there some trick to this? like 1 in 8 times it actually scrolls, it's not even smoothl, it like jumps, not smoothly scrolls the page.
View 10 Replies View RelatedI bought my Y500 a few days ago and happy with it in general. However, one day the two-finger-tap (for right click) on the touchpad stopped working. Below is a description.
Everything else as far as I can tell, including two-finger scroll and one-finger tap and so forth, are working fine, but the two-finger tap stopped working even though it worked fine for a few days. I have a suspicious as to what caused it but I'm not entirely sure. In any case I think it's most likely a bug, and probably software.
One day I went into "control panel" -> "mouse" -> "device settings" -> "settings..." -> "Scrolling" -> "two-finger scrolling" -> "enable coasting". I played with coasting for a while, and soon disabled it again because I didn't really like it. However, it was then that I noticed that my two-finger tap stopped working. I have doubled-checked that "control panel" -> "mouse" -> "device settings" -> "settings..." -> "clicking" -> "two-finger click" is set to "secondary click (context menu, special drag)", but the two-finger click still doesn't work, even after a restarted. I downloaded the latest driver (version 16.2.18.0) and it still didn't work. I uninstalled the driver and installed it again and it still doesn't work. Now I like using the touchpad, but really hate living without two-finger tap for right-clicking.
I recently bought an Inspiron 1545 and absolutely cannot stand not being able to 2-finger scroll. The "side pad" function works poorly at best, and is so undependable that I am resorted to using a mouse whenever possible.
How on earth can I get my Inspiron 1545 with an Alps touchpad to have 2 finger scrolling similar to Mac systems? Is it even possible?
I recently purchased a Lenovo Y510p, and the touchpad uses the ELAN software. However, by default, it doesn't seem to allow you to use two fingers to tap for right click, nor three for middle click.
After digging into the matter, I discovered you can make some changes by installing Asus Elantech driver 11.5.0.9 to allow you to see many more options in the control panel, and I successfully changed Swapping and 3 and 4 finger touch functions.I am struggling to change the double finger tap.
I have the Dell Inspiron 3135, Series 3000 and while cleaning I must have hit a combination of buttons or something because now my finger touchpad does not work. I am stuck with navigating through the touchscreen. What keys do I hit to turn the touchpad back on?
View 2 Replies View RelatedI bought my Y580 about a month ago and it has been great. The only problems I've been having with it is with the touchpad. About a week ago the synaptics software on here started to shutdown at random and things like two finger scrolling and swiping from the sides would all stop working. I searched around and downloaded updated software both from synaptic's website and from lenovo driver support. The newest ones from lenovo are the only ones that don't quit at random but now the only thing that doesn't like to work still is the two finger tap to right click. Sometimes it'll work for the first ten min when I first turn the laptop on but then it'll quit. Two finger click sometimes works for right click but not always and two finger tap for right click never works any more.
View 9 Replies View RelatedI bought a E1-572P-6_BR629 and the touchpad has no scroll function with a finger or two. Is it normal?
View 1 Replies View RelatedI recently upgraded my Z580 to Windows 8.1 x64 from Windows 8x64
Some Windows 8.1 drivers work, for some things I had to use Windows 8 drivers
But the touchpad isn't registering a two finger click as a right click on either of the drivers. It used to work fine on Windows 8 but I have to use the button to right click which is uncomfortable. Two finger scrolling works fine, pinch zoom gesture works fine, even Windows 8 screen edge gestures work perfectly...
I have a problem with touchpad, when I slide my finger over it, pointer doesn't move smoothly, it is very laggy. When I connect my mouse, it works fine and smooth. I've tried to find some solutions on here but none of them worked. OS is Windows 8.1.
View 3 Replies View RelatedSo since I've bought this computer I've had problems with the two-finger scrolling suddenly stopping, like many people have. That's always been fixable by going into properties, device settings, settings, unchecking/rechecking one of the boxes under "two finger scrolling" and hitting OK.
Now, though, my touchpad is suddenly stuck on one finger scrolling, and it's super annoying. There is no "one finger scrolling" option under the "scrolling" drop down thingy under device settings, so I haven't a clue why this is happening. I've tried the usual fix above, restarting the computer, installing new drivers, but it still does one finger scrolling. Which means it scrolls a lot of the time when I don't want it to, and the pointer seems to get "stuck" at times when I'm just trying to move it around.
Laptop 3 years old and touchpad slowly stopped responding one night.
Downloaded new driver (ALPS Touchpad v7.1007.115.102. A05) no less than 3 times and had a partial success. Now right half of touchpad is ok but left half can only respond to up/down finger movements.
Run Dell diagnostics and all hardware is ok.
Run a full antiVirus scan and ok. Laptop says new driver is ok and running ok.
Touchpad does not work in BIOS and done a full diagnostic check and said the touchpad is fine!
Use of mouse is ok so not the end of the world!
Back to factory settings?
After updating the touchpad drivers to 16.3.7.0 A03, there has been an issue with two-finger scrolling.
When I lift my fingers off the touchpad, it jumps to the bottom of the page. This is very frustrating as I have to scroll back up to find my place. This happens with Chrome, Word, IE, Firefox, everything.
The same issue is also plaguing this user: [URL] .....
I get this spiral symbol (see above image) in place of my mouse indicator when I move my fingers a certain way on the ultranav mousepad.
One way it occurs is if I move my finger from left to right or right to left across the bottom of the ultranav mousepad.
It interferes with me being able to move the mouse. I suspect it is to prevent inadvertant movement of the mouse when your finger just brushed the ultranav mousepad. I would like to turn it off if possible.
Hey I have a sony vaio TZ (tz11m/n) which I rebooted and erased all the data from re-installing windows vista which it comes with. Since then the Touchpad has not worked at all
View 5 Replies View RelatedI just got a Lenovo Y40 and the touchpad uses the ELAN software. I already set up two finger option to open right click (pop-up menu).
View 9 Replies View RelatedMy laptop is ideapad z510 and os is windows 8.1All action and gestures are working in elan touchpad except two finger pad (Right Click)I searched the forum and found that the synaptic driver can fix this problem, but when I want to install it tell me that this system does not have any synaptic touchpad!I test both lastest update from Lenovo and Microsoft for touchpad driver, but didn't solve this problem!
View 6 Replies View RelatedI have a non working touchpad for my SZ-483N/C. Does anyone know a place that I can get a replacement?
View 8 Replies View RelatedI bought a Sony Vaio VGN-FW51MF about a month ago with Windows 7 and its developed a weird fault both the touchpad buttons don't work except for being able to select one of the quicklaunch icons,
no other icons respond to either buttons either single or double click, I can use the click on the touchpad itself to get around but this has only happened in the last couple of days,
I've tried reinstalling the driver, system restore and even removing the battery for 10 seconds but they still don't work and under the settings they are configured correctly
If anyone out there runs into an issue with the touchpad on a Sony Vaio where it suddenly stops working it may be due to static electricity. I bought a brand new VGN-NS240E (Jan 08 @ Best Buy) and while setting it up I ran into this issue and have seen many other reports on the WEB of the Sony touchpads suddenly dying. Try these steps for an easy fix:
1 - power down the unit.
2 - unplug the power adapter.
3 - remove the battery.
4 - hold down the power switch for about a minute or two.
5 - re-insert the battery.
6 - reconnect the power adapeter.
7 - power the unit on and see if the touchpad lives!
These quick and simple steps worked for me 2x. Noted on the second time it happened that I shocked the machine after walking across the carpet, that's why I said above I think its related to a static charge - bad design on this model of touch pad I suppose. I have Dell laptops and Acers never seen it before until this Sony.
My Vaio is just out of warranty and it's always had a bit of a clicky odd left-button.
I've noticed that it is gradually getting worse so I'm expecting it to break soon. I should have had it done while the computer was in warranty, but I've heard bad things about their service centre, and they'd probably have charged me for the repair anyway. I did ask them about it toward the end of the warranty period and they wanted me to email them Admin passwords and then pick up the computer for an undisclosed period. I just didn't fancy it - my fault.
Anyway, I have several friends at work who are IT technicians and one of them will have a look. I haven;t found a service manual for the CR series yet, but I'm assuming the buttons are part of the mount for the trackpad and can either be replaced individually or the mount (or pad) can be replaced.
It's just over a year old and I'm thinking about boosting the RAM, HD and upgrading to W7, but on the other hand, I'm not convinced the machine is going to survive another 2-3 years...
Two finger scrolling now works on the synaptics touchpad of my dv7
I had previously attempted to use modded drivers and other apps (none of which worked), but surprisingly, synaptics seems to have enabled it all by themselves in the latest driver, which is part of scrybe.
More about scrybe: [url]
Guide:
1. Download the ScrybeSetup.exe file from here (you can enter a junk email): [url]
2. Install the software (Make sure it installs both scrybe and the new driver)
2.1 Restart
3. Go to Control Panel>Mouse>Device Settings (Tab)>Highlight Synaptics Touchpad Vx.x> then click settings
4. Once you have the Touchpad settings windows open, you can change all kinds of settings:
Multifinger Gestures>Two Finger Scrolling (Click the gears next to the name)
Multifinger Gestures>Rotating (Click the gears next to the name)......
I upgraded the OS to Windows 7 professional x64 several months ago, at that time sony had not provided the drivers yet,
but still Win7 recognized most of the devices and I've tried to install the drivers for other OS,
most the installations were incomplete but somehow some of the multi-media buttons worked except for the AV MODE button
Anyone ever notice that half the time the finger print scanner doesnt work and you have to reboot the system for it to work again?
I get this often when I switch modes from stamina to speed and put the computer to sleep. Waking back up finger print scanner doesn't work
Trying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
View 5 Replies View Related