My Sony VAIO laptop came with Windows Vista Home Premium installed. I created a recovery disk and installed Windows XP. Now I want to install Windows Vista again. In the meantime I have repartitioned my disk and created a backup partition where I put my files. If a use the recovery disk to reinstall Windows Vista will it affect the backup partition (D drive) or just the C drive.
View 5 Replies
I am so tired of receiving Low Disk Space on recovery (D). I have done everything it asked. Empty Recycle Bin which is EMPTY. I am not a computer wizard but it seems unfair that I have pay over $150.00 year to correct this problem once a year. I have checked a lot of places and it just keeps telling me the same thing. That doesn't work.
I did just install a HP wireless printer 3052A
HP Pavilion dv6000
Windows Vista (home version)
Bought my Vaio only a couple of months ago. Thought it was the best thing in the world. When I finally got it and turned it on it kept reminding me to make Recovery Disks!
Finally got around to doing that and stored them in a safe place.
Seeing that I had bought it at a certain time I was receiving the upgrade to Windows 7 Home Premium for free. Now mind you, everything was working fine on my laptop up to this point. Windows Vista 64bit Home Premium was doing a fine job. Well, after receiving the upgrade I went ahead and installed it. Also did the companion cd that came along with the upgrade. Went to sony esupport webpage and downloaded all upgrades from there.
This is where things started to go wrong. For some odd reason, some of the upgrades from the esupport webpage would not install, mainly the WinDVD program for my Blueray player.
Idid everything that I knew possible to get it to install. Nothing worked. I finally got to the point where I was about ready to call Sony and tell them to take the dang thing back. Now here is where I start to make mistakes. Being as frustrated as I was, and not thinking about the possible consequences...I inserted the recovery disk into my laptop. Turn off the laptop and restarted. Up pops the menu to erase all the stuff from my C: Drive.....and that's what I did. After all was said and done and while trying to restore my C: Drive, I find out that the first disk that I made is corrupt. Mainly the P23.sny file. If I could somehow possibly get this file from someone then I could make a new recovery disk and start all over again. I've looked on the laptop to see if that specific file is there and alas it is not......don't know why either. I need help in a big way.
I just got my new Z, burned the recovery disk, did a clean install of retail W7, and now wanted to go back to original factory setting. So I popped my recovery disk back in, selected "Restore Complete System", went through all the default options. Then I got "An error occurred while executing an application." at 17% into recovery, and the recovery stopped.
Did I screwed up on the recovery disk? My recovery disk is 7.90GB.
Is there a way to recover laptop without the recovery disk? I'm told there may be this function on the computer itself...but don't know how to get there..
View 4 Replies View RelatedI've been trying to create recovery disks for the new VPCZ1 I got a couple days ago through the VIAO care Recovery and Restore tool. I get two error messages either:
"No installed optical drive is detected on your computer" even though the drive seems to be working fine outside of the recovery tool.
or
"The disc in the drive is not blank or is not a supported disc type"
even though the computer recognizes the disc as a blank dvd outside of the recovery tool.
I usually get the first error message, then when I hit "back" and click create a recovery disk again, I get the second error message.
My brother has a vgn-sz436n, he bought it from asia. recently his sz cannot boot in to normal windows mode, but can get into safe mode. so I figure a way to get into windows mode and made a copy of the sony recovery disk. I start to restore his computer with the disk by pressing F10 in the startup. however it would only install half way, when it restart itself, same thing happened, I cannot get into the windows, all black screen.
so I decide to try install XP, and turn out XP can install perfectly... so I try to do the recovery disc agian, I press F10 in the startup, nothing happened, it just sent me to XP.
How can I recover the vista using the backup reocovery disk? what do I do now?
I hear it is possible to create a recovery disk on only one DVD-R for my Vaio laptop. I lost my disks and need to recreate them, but the recovery app fails after a few disks.
What I need to know is what type of DVD-R can I buy that would have the capacity to hold all the recovery disks data?
I finally got my VPC Z with HDD/no DVD today and I thought I'd start up a thread on the subject for those like me who once receiving their Z will be trying to use Vaio Recovery Center to create recovery disks without using a DVD Writer.
Installing Win 7 from a USB stick is fairly well documented on the web but the problem above isn't, certainly not for the VPC Z anyway. I know that it's probably gonna be simpler to just create a bootable USB key/stick and copy the relevant drivers to it and use that (something I'll be doing to get rid of all the crapware sony have preinstalled) but I like having the security of an additional backup solution just in case I royally balls it up.
The main issue (i think) is with Vaio Recovery Center itself, if you try to create the recovery disk the software will complain that no dvd writer can be found. After trying a couple of virtual CD/DVD/BD-ROM/HD-DVD tools I took the advice of TofuTurkey (cheers fella) in the vaio owners thread and tried Virtual CD. I'm happy to report that this has the capability to create a fake drive with various fake media discs and does indeed fool the Vaio software into creating an ISO to the internal hard drive. I setup a DVD+R DL drive and everything went smothly. Vaio Rocovery created a single ISO 5,344,117KB in size.
Seems the next trick is to find a way of creating a bootable USB stick (again there's plenty of info out there concerned with installing Win 7) and then writing the ISO (or contents of?) it to it and filing it away for safe keeping. ZoinksS2k mentioned I should be "sure to set the partition to Active and run bootsect to make it bootable." which is going to be my next step after I've read up a little again on this.
i have a hp 620 notebook, and it is given me an error message "non-system disk or disk error" after i turned it on. it had worked find in the morning and now it is displaying this error message and i cannot log into my notebook. i tried to recover it with hp recovery but it said "data is not valid.
View 8 Replies View RelatedI have an HP Pavilion dv6000 and run Windows Visa Home Edition.I wanted to restore my laptop to its factory settings but the Recovery Manager wouldn't work. When I clicked on it it would just restart the computer without anything else happening. I then right clicked on the computer >manage> disk manager and made the recovery partition active. When I rebooted the computer it began showing:Bootmgr is missingPress Ctrl+Alt+DeleteWhich of course leads back to the same message after te computer reboots. I can't access F8 key. Only F10 (Bios) works. I don't have a recovery or installation CD as it didn't come with the laptop when I purchased it.Is there anyway I can change the active partition back to the C drive, this disabling the recovery partition? I read that it was possible to access disk manager from cmd prompt window, but I don't know how to access it since the F8 key won't work (makes just a bipping noise when pressed)?I am also out of the country so can't mail my laptop to HP to have it fixed.
View 9 Replies View Relatedi have hp pavilion g6 notebook pc laptop...but it does not contain recovery disk and whenever i create recovery disk from recoverry manager it failed to verify disk 1 and show the message "insert another disk " it happen again and again ...what to do....
View 3 Replies View RelatedI performed a system recovery to factory settings that resulted in my Disk space being distributed differently than before. I have a lot of unallocated space as you can see bellow. I need to know how to fix and how to prevent this from happening the next time I perform a recovery. Also, is it normal for the RECOVERY (D) partition to show multiple times in Disk Management ?
View 2 Replies View RelatedI just got a new XPS 1530 with Vista Home Premium 64 bit. I'm told, before I do anything, I should make a Recovery Disk. How do you do that?
I think the recovery disk is used in case everything crashes.
It's different from a Boot disk (which isn't needed anymore, since you can use the OS installation disk to start Vista if needed).
Also, I'm not talking about System Restore, which reloads your system from a time before your last SW install.
Bought 5530 in August but already need to run recovery disks as the photo gallery constantly crashes and using restore to an earlier date does not work. I burnt two DVD's when I got it and they looked OK. However after changing start up in BIOS to dvd drive then restarting holding down f8, when pressing the complete restore tab nothing happens except a message saying no restore dvd or HD can be found. Cannot think what to try as the disks and dvd drive appear fine. I wish they included the disks with machine like sony do then you would be 100% sure it is not the disks at fault. Anyone else encounter this? I am sure the problem with the photo gallery is not a virus as I do not use the machine on the internet
View 6 Replies View Relatedi bought a new hp laptop so i started to make recovery disks but when collect data it recieved 50% and then stopped and give me the following screen canceling in progress
recovery disk creation will reume where you left off in the process the next you start the program
I am using HP Dv2000 notebook, now when i try to create a recovery disk, i intially used the CD and copied the file then i noticed that that the total no of CD required is 18 where as if we use DVD it needs 2-3, so the 2'nd one i inserted is a DVD, the recovery program now it is saying that you should install a CD rather than a DVD, can i start again the process of copying using my new 3 DVD's?
View 11 Replies View RelatedI was given a broken 5600 - if I could fix it, it was mine. I fixed the electrical fault, but also foolishly deleted the hidden partition 1, which apparently held the restore image. The donor doesn't have the recovery CD, and I now need to do a full recovery. The drivers on the Acer site don't quite do the trick, and there's nothing I can find on the site to buy a new recovery disk.
View 6 Replies View RelatedMy notebook is Acer aspire 4720Z. Operating system is vista home. I tried to make recovery disc by using erecovery management tool but there burn disk option is disabled. How can i make recovery DVD now?
View 5 Replies View RelatedOne of the OEM memory modules took a hike, so I replaced both modules with a Corsair 2x2gb DDR2 800MHz kit.
Did the Alt-F10 and got Vista back.
While deleting all the bloat-ware I was prompted to make the Recovery Disk.
I went ahead and made the Recovery Disk after deleting all the game stuff.
After all that business I went ahead and finished deleting the NTI back up 5 and a couple other things.
Now I am in the process of installing the downloaded .exe SP2 for Vista and will jump online and do some other Microsoft updates (Defender, Explorer 8) the usual stuff.
Can I make another set of restore disk that will have all the updates and all that buiness? Or is the restore disk option just for when you first start using the system?
Just got my new HP Pavillion dv5-1000 laptop and I'm very pleased with it so far, apart from one problem.
The machine came without any backup disks, which seems to be a standard HP thing. So I've tried to create my own disk using the Recovery Manager software. It goes through the first part of the process collecting files, but when it reaches 100% I get an error message saying that the files are more than 0mb and it can't continue.
I've tried using a different blank DVD but get the same message.
It's a pain, and is spoiling my enjoyment of an otherwise excellent machine. If anyone can suggest a way around this I'd be grateful.
I've tried this fix:unable to burn Recovery DVD but the software doesn't install.
I was recovering my Hp Pavillion dv5120us laptop and once it asked for my 3rd recovery disc, i noticed it was cracked in 3 places on the disc. I put it in the laptop b/c it is the only copy i have, in hopes that it would work anyway but it did not.
If someone has their own set of the recovery discs for this model computer, please send me a copy or a link to download it so i can make my own copies. I am not that computer savvy so please make it as easy as possible to download.
I also tried ordering the recovery discs from the manufacturer website but once i clicked on 'recovery disc set for windows xp' it gave me a 'cannot display web page' notice.
On my HP Pavilion the Recovery disk creator kicks out disk 1 (it says it will make 3) with an error note. If I stick another disk in it starts all over.My DVD+R disk is a 4.7 GB. Could it be only one disk was needed?
View 10 Replies View RelatedI reinstalled windows 7 home premium on my machine, using the same serial number as the one that came with the laptop (I found the serial number by downloading some software that scanned my computer and told me what it was).After installing windows, it told me that it was not genuine. I imagine that it is because it wasn't a version of Windows that has all that HP software pre-loaded on it. My hard drive still has a "recovery" partition, but what to do with that, or even if I can do anything with it anymore. So how can I make my Windows 7 home premium genuine? Do I have to reinstall another version of windows 7 home premium with the HP software included? Where do I find such download? Since I don't have a recovery disk, can I use that "recovery" partition of my hard drive for something?
View 4 Replies View RelatedI have a Pavilion dv9925nr, part number; fe695ua#aba, and would like to obtain a recovery disk set. The original OS was Windows Vista 64 bit.
View 3 Replies View RelatedI have an interesting problem on my computer where it will boot, then crash, then boot properly. I'm not sure what is causing this (i turned on legacy for a while but reset back to defaults). I tried doing a windows reset already and this didn't work but I figure a complete factory reset should do the trick. I have burned recovery disks but cannot figure out how to use them. In the windows 8 advanced restart, I have tried the option to boot of usb as my dvd drive is external and it doesn't work. How to boot using the recovery disk? (the model is an envy 4)...
I managed to boot off them by turning off secure boot and changing the boot order to boot off usb optical drive in the bios menu....
I had to buy the recovery disk for my Aspire V5, when I start I change the bios to UEFI with secure enabled, then I use the disk Recovery System, once that I´m in the Acer Console Management, and I Selected the restore full, a pop up came with the message "Please Change your bios to Legacy¨ so I click on the exit button, and I enter to the bios and select the legacy mode, then the acer console management starts and says that the systems recovery fails because this is only for UEFI mode. So I dont know what to do, I have another 4 disk for the recovery but none of this is a booteable disk. Also I tried with UEFI and boot secure disable and same result .
View 1 Replies View RelatedI have a Dell Vostro 3300. Windows 7 OS. Hard drive went out. Replaced hard drive. Reinstalled Windows 7. Used backup system disk that I made with Recovery Manager back in December 2012. It looked like it was working properly, but after using all backup disks, got message image could not be applied. Started over, reinstalled Windows 7. Put in #1 backup system disk. When drop down box is displayed asking which backup to use, I choose 12-29-2012 like I did before. Nothing happens. It just sits there. Next button can not be used (it is greyed out).
View 1 Replies View RelatedI have an HP Pavillion dm4. My hard drive died so I installed a new hard drive. The original OS installed on the computer was Windows 7. I did not get a Windows 7 disk with the computer. If I order the Windows 7 recovery disk from HP, will it install Windows 7 on my new hard drive? I have the COA info.
View 3 Replies View RelatedOne Key Recovery (Windows 8) doesnt give an option to create a recovery disk.
View 1 Replies View Related
