Sony :: Z11 Fails Windows 7 Validation
May 3, 2010
Yesterday I tried to install Windows XP Mode onto my Vaio Z11. The installation required a Windows Validation, which requested to install a file called WindowsActivationUpdate.exe.
I did that, but the installation failed with error code 0x8007054f ("Internal error"). I tried this several times, but it always failed (once with another error code, 0x80070bc9).
The result is that I cannot install Windows XP Mode, and validation results suggest that I might have a pirated Windows 7 version. I am using the factory-installed Windows 7, obviously
View 10 Replies
ADVERTISEMENT
Jan 20, 2015
I don't know why my acer aspire E1-510 fails to upload windows...after wasting so much time, it revert changes and thats freaking me out...its also very slow...I tried playing fifa2013 on it.its so slow...
View 1 Replies
View Related
Jan 29, 2013
I just received replacement media to install win 7 on Inspiron N5110. Â The install is failing with a general Windows install message, restarts computer to complete setup then errors again. Â I ran the diagnostics again and the memory is getting this error:
Error Code 2000-0123
Validation 55729
Msg: Memory - integrity test discrepancy
View 5 Replies
View Related
Feb 27, 2013
My Dell Inspirion 1721 fails to start the Windows boot.
The F8 and CTRL F11 do not work at all. I did the hours long total diagnostic that is built in and everthing passed - so must be software.
How do I recover? Can I just install a new version of Windows (to replace Vista) and save the existing files and software on the laptop?
View 4 Replies
View Related
Jan 7, 2012
I have a T440p with Windows 7 Pro. Except on rare occasions, I am unable to log into Windows with my first swipe across the fingerprint reader.  The green light is on when I do the first swipe and it immediately goes off and stays off for around 15 seconds, during which time another swipe does nothing. Then the green light will return and a second finger swipe will log me on.
Â
It's made using the fingerprint reader for login impractical, because it's faster to just go to the password screen and log in that way.Â
Thinkpad T440p: i7-4800MQ | Crucial 16GB DDR3-1600, 9-9-9-24 | Samsung 840 Evo 500GB SSD | Intel 7260 Dual-Band AC Wireless | Windows 7 Pro
View 9 Replies
View Related
Apr 17, 2010
I have made a new install of Windows 7 Pro 64 bit. I then install "Dell System Software" which is found under "System Utilities" on their driver page. I reboot the system, and then windows gets an error and won't start. I have the newest BIOS installed.
View 10 Replies
View Related
Jan 8, 2009
i have windows XP with service pack 2 in my XPS M1530. All the drivers seems to be fine. one problem now i have is it does not burn CD with any softwares, not even with XP cd writing s/w directly.
View 6 Replies
View Related
Aug 15, 2009
HP notebook I have ever owned. Given I'll be taking this to school under the elements, how long on average can I see this GPU lasting? And if it dies under warranty, will HP fix it for sure?
View 5 Replies
View Related
Mar 2, 2010
I have tried the 1.35, the 1.32, 1.31, and 1.29 bios for the 5620 and all of them keep coming up as 'open flash.sys fail'.
View 10 Replies
View Related
Oct 20, 2014
I got this idela pad U410 about a year ago and it was functioning nornally. A few months ago it started to boot up very slowly when power cycles. A hibernate was quick. Now it never comes up and keeps waiting at the Lenovo screen, no windows. I have seen posts that say it is a manufacturing defect. This one is out of warranty, so what is the solution. Do we have a solution at all? Why does Lenovo market such a bad product. BTW, the back cover is so flimsy that it gave up and had to replace it. Overall a case of bad engineering i guess.
View 6 Replies
View Related
Jul 23, 2012
I closed Down the lid to head to my room and then came back about five minutes later, opened it up, and pressed the power button. A flash of a blue screen appears but I can't read what it says on it and then once it tries to load it reverts to a black screen that says "Windows has failed to start up . A recent hardware or software change might be the cause." Then I can either launch Startup Repair or Start Windows Normally.
I have tried both options, ran a hardware diagnostic test twice, tried to restore to a previous date, and tried to boot up in safe mode but each option fails and it just goes back to this black screen with the two options.
The only option I haven't tried is reverting to factory settings but that is because I would like to save my files first.
View 6 Replies
View Related
Jan 9, 2008
I have a Dell XPS M170
SPECS:
Intel Pentium M Centrino 760 2.0Ghz Processor
1Gb 533Mhz Ram
nVidia geForce Go 6800 Ultra
17" WUXGA Tru-Life Liquid Crystal Display
Microsoft Windows XP Media Center 2005 SP2
SigmaTel C-Major Intergrated Audio
The problem is sound been very gargly and sometimes direct music audio fails. I don't won't to buy a sound card.
1. Any drivers you use?
2. Any tweaks you would recommend?
3. Can cleaning the connectors fix it?
View 15 Replies
View Related
Feb 20, 2010
I have tried downloading the current BIOS from the US site, uncompressing the files and running the application and recieve " open flash.sys fail".
THEN I tried downloading V1.8 from the european site and again, unzipped the files, looked everything over, and ran the application and got the same
error "open flash.sys fail" I am a rookie, and I want to upgrade the processor to a dual core cpu, but cant even get the BIOS updated. HELP! Its frustrating. I have an Acer Aspire 5315 with a dual core cpu and I love it. I just want ot upgrade my 4315.
View 10 Replies
View Related
Dec 26, 2008
I downloaded a 800+ MB game today and was playing it even though it said my graphics card didn't match and stuff... I got a couple runtime errors and the game got shut down, but later I started ignoring the messages when I figured out that way, I can keep playing. Then I "accidentally" responded to the error message and when the game got shut down the computer stopped responding at all. I force-shut down the computer by holding down the power button. Then, after that when I try to turn on the computer the fan starts turning and green light comes up... for about 3 seconds. Then it takes a .1 sec-long break and tries again for another 3 seconds, then gives in completely. It does this when it has power, so I don't think it's the battery. It won't even show the Acer screen at the very beginning. It's a Vista, no recovery CD (do you ever get recovery CD's for Vista?). Any chance we get our notebook alive and kicking again?
View 14 Replies
View Related
Feb 1, 2015
I have a dell 5010 and it went black screen as I was using it. I powered it down by holding the power button and then tried to rebot. The laptop power led goes on, the hard drive led flickers once and the fan goes on but slow. The screen stays black and the laptop does not booth. It then sometimes bleeps times over and over. Is it dead? How can I fix this or at least recover the data in the hard drive? Â
View 5 Replies
View Related
Jul 3, 2014
I have an Inspiron 15R 5521 that is causing me no end of headache. When I try to boot it, it starts to boot (audibly you can hear the internal systems starting to go) but the screen stays black and after about 5 seconds, it starts beeping. It beeps continuously approximately once every 2-2.5 seconds, and I have counted up to about 30 beeps (it didn't stop beeping, it was just doing my head in).
It started about six months ago, doing it once when I tried to boot it, but pulling the battery fixed it. However, it got progressively worse until one night it simply wouldn't boot at all. A short-term fix was to mash F4 or F9 once the power button was pressed, but now even that doesn't work. I think it might be something in the boot sequence that causes it to fail...
View 7 Replies
View Related
Mar 13, 2013
My xps fails to power on, here's a quick history of the laptop, couple of months ago i decided to try fix my dc jack issue, it would only charge holding cable a certain way, replaced the jack but my soldering wasnt good enough so bought a replacement MB and installed.
this lasted around 2 weeks, laptop shut down after battery had ran down even though connected to ac, looked at transformer on lead and noticed power light was not on, bought replacement charger and connected immediatley light on lead started flashing indicating a short on the mb (i think), tried 2 different chargers same result
bought another mb that was fully tested before shipping, installed, when connecting ac the battery flashes orange 3 times then green and continues this cycle, from what i read think this is only to say the battery is bad.
however the laptop doesnt power up tried it with without battery and did the stat drain technique of holding power button for 60 secs etc.
Basically when switching on the power on light comes on for maybe 3-5 secs and goes off again without any fans etc even begining to boot, if i hold the fn key and power it lights the 3 leds on the left, 9, numlock and i forget the symbol on the other led...
could it be the cpu? though it sounds as if the laptiop isnt even getting to stage of checking for all hardware?
View 8 Replies
View Related
Apr 6, 2014
I have a new G500 with a 500GB drive and Windows 8.1 preinstalled. I foolishly thought it would be easy to upgrade it to 1TB, which is supposed to be supported by the hardware according to the technical documents. Using OKR I have created a backup USB disk, ensuring that the option to copy the Recovery Partition is checked. All appears fine, I get a message to say that  the disk was created successfully. I have not taken the recommended option to delete the recovery partition at this point. When I then replace the internal drive, boot from the recovery USB drive and run the restore, it fails at 42% with the message "There was a problem resetting your PC." No other information is provided and the only option available is to power off the PC. I have tried all three USB ports, 2 different 1TB disks and have tried all the options available. I have also tried two different USB disks for the back up.
Â
This machine is only 2 weeks old but it is starting to drive me round the bend. As it takes the best part of two hours to fail it is a time consuming procedure.
Â
It seems that Lenovo's backup/restore software simply doesn't work. It may be something to do with the BIOS - this machine has a newer version than is available from Lenovo's website.
View 6 Replies
View Related
Apr 9, 2009
I have tried creating a recovery disk using the ‘Acer Empowering Technology’ but every time i click on the “create factory default disc” button, the “Acer eRecovering Management” freezes and i get an error message saying : Acer Empowering Technology Framework launcher has stopped working. A problem caused the program to stop working correctly. Windows is collecting more information about the problem.
Another thing, i know how to unhide the 'PQSERVICE' partition, but i'm wondering if it's possible to create these discs directly from the partition without the need for the faulty 'eRecovery Management'. If yes, how?
View 4 Replies
View Related
Aug 5, 2014
Using Dell Clent System Update to update a Latitude E6530. All drivers are updated now except the Intel Chipset Driver. On Windows 7 64 bit. Framework version of the driver is 3.0.921.
The error message that it gives is Update package digital signature is invalid - status: Failed Error Code 7
Not sure how to remedy this.
I am trying to install this driver update hoping it will remedy a black screen with cursor when logging in. It takes about a minute to login and then the desktop finally appears. Was taking quite a bit longer to log in before I updated the other drivers and then removed McAfee to see if it was eating up system resources.
View 6 Replies
View Related
Mar 25, 2013
I'm setting up a my new Dell Windows 8 laptop.Now, I'm trying to create a set of recovery disks in case anything goes wrong, I'm using Dells own software. Unfortunately there seems to be an issue with, in other words its pish, and it fails after creating the first disk when it needs to create four. Every time I put a second DVD in it just ejects with no error message.it seems that a lot of people around here are having the exact same issue. It wouldn't be such a problem if you could boot into the recovery partition by hitting f8 during boot, the only way you can access it,though, is by holding down shift in windows 8 and pressing restart which is absolutely no use if windows won't boot!! I've got a hold of Acronis True Image 2013.
My question is can I make recovery media by creating a boot disk and then creating and image of the PBR partition, which I'm sure holds the recovery data? I can't back up the whole system as there is now 120Gb in data on it. I don't wan to back up the whole system, I just want to be able to restore it to factory default,in case anything ever goes on it, by using DVD media.
View 2 Replies
View Related
Aug 16, 2012
The above fails with an error "check for updates failed" in the gui.
Sometimes it determines the list of updates to get, but then fails to download those updates, sitting on the download screen and doing nothing.
Files are created C:UsersadrianAppDataLocalDellClientSystemUpdate emp but they never exceed 11.7MB.
View 5 Replies
View Related
May 2, 2013
I am an HP DV6-6c38TXÂ running Windows 7 x64. I also have VMWare Workstation 10 installed.
Â
Drivers installed for the webcam are :
Â
ksthunk.sys
usbvideo.sys
Â
Issues:
Â
1) running in normal Windows 7 x64 base machine (not VMWare)
Â
a) after booting the laptop I can use the webcam
b) I run an app to capture an image and it works fine. I then close the app.
c)Â I open Skype and use the webcam and then Exit Skype.Â
d) I open the app again and it says - could not detect webcam device (assuming this comes from the app)
f) I open Skype and check the webcam and it works. I stop the webcam (Skype still running)
g) I start the app again and now the webcam works
h) I Quit Skype, runthe app again, and it now says - could not detect webcam device
Â
That is just for the Laptop running as is.
Â
2)Â VMWare
Â
now in VMWare, this is worse.
Â
a) I attach the Webcam
b) I run the same app, but it says - could not detect webcam device
c) I close VWMare
d) Now no app detects the webcam, not the app, not Skype.
e) I check the Device Manager and in fact the webcam now does not even appear in the Dedvice Manager...
View 8 Replies
View Related
Apr 23, 2009
ACER Travelmate 2420 fails to see operating system and will not restore from disc.
My Acer Travelmate 2420 now fails to see the operating system. When I use the restore DVD that I had made it boots up and after a while the recovery runs. I hit a problem when the machine asks for disc 2 to continue the recovery. Only one disc was ever made during the back up session.
A few facts.
Before the OS failed Acer Recovery and other Acer Programs had started to not function.
The C: and D: drives where NTFS Formatted.
I have even considered cleaning the hard drive altogether and installing a new OS. The problem here is that I can't get into DOS Mode.
View 10 Replies
View Related
Nov 14, 2014
This morning, my Inspiron 3721 (18 months old) failed to turn on. Â Worked fine last night.
Symptoms: on pressing power button, only power light illuminates, but no other noises, no fans, no screen response.
Have removed battery, removed power lead, held down power button for 50 seconds. Â Reconnected battery & power lead, but no change to above behaviour.
Tried a different power lead but no change to above.
View 1 Replies
View Related
Mar 21, 2013
I'm about two week in after purchasing a Dell XPS 13 (L322X)... I've begin noticing the keyboard backlighting fails turn on after resuming (opening the lid)Â from sleep mode. Depressing the FN with the backlight doesn't remedy only a system restart does. Could this be the result of flawed keyboard drives? If so how do I get the drivers?
View 4 Replies
View Related
Dec 28, 2013
I have a HP ENVY TouchSmart M7-J010DX Laptop with Core i7 Haswell CPU and Intel Centrino Wireless N-2230 card. Product number is E0K83UAR and I'm running Windows 8.1 OS.  Lately, I've experienced many occasions when the laptop fails to connect to a wireless network when other PCs in the same room connect. I should say it mostly connects, but with "limited connectivity" and no Internet access. I struggled during a week's vacation to connect and then had a problem connecting when I returned home, where I previously had no problems. And I'm having this problem on networks that previously were not a problem. I've read on this forum that many people are having similar problems. So, I'd like to upgrade the wireless/bluetooth card to something that is known to work more reliably. I assume I would have to stay in the Intel family. I saw one recommendation for an Intel AC 7260 card...
View 3 Replies
View Related
Apr 8, 2014
The Broadband on my X1 Carbon (Gen 2) always fails to connect with an error message saying that "You're either out of service or SIM card not activated" while neither of these conditions are true. Oddly, SMS is working fine and I can both send and receive messages without problems.
Â
What could be wrong? How can I diagnose and fix the issue?
Â
Some more details:
Â
- The ultra-book is a Type 20A7 which came with the SIM slot but no broadband modem. At that point Access Connections showed the Broadband option greyed out. I had to call support to find out why and that's when I learned there was no modem.
Â
- Support told me to order part number 04X6038 which is a Sierra Wireless EM7355. After installing the latest driver, the Broadband option was now enabled but it still failed with the error message mentioned above.
Â
- At the wireless store I told them it was not working and they gave me a new SIM card. This time I received a welcome SMS message. i tried sending to a few numbers and replying which works.
Â
- The wireless provider took the IMEI number of the EM7355 and confirmed it was compatible which seems logical considering SMS is working.
View 3 Replies
View Related
Oct 11, 2014
Just had my Aspire E15 for a month and even though the power supply lights are on it fails to start up and just have a blank screen with the pointer mouse on.
View 4 Replies
View Related
Aug 21, 2014
My 5 months old SSD crashed and I replaced it with a Macrium created mirror. Everything seems to work except the computer no longer recognizes USB drives. The USB drives are good (checked on other devices), I've removed and reinstalled all USB hubs and drivers - the chip drivers and bios are up to date and the USBs are enabled in the BIOS AND I've done several virus scans (online and local) in safe mode (Malwarebytes, Spybot, ESET, Defender, AVG, Housecall). The USBs are recognized on boot but once Win7 boots the USB for storage devices no longer work.... however, the USB recognize keyboards and the mouse. Guessing a new OS install will fix it, however, I would rather not reinstall everything.
View 1 Replies
View Related
