Sony :: Z11 (new) SSD Change
Apr 22, 2010Anyone can tell me how can i replace my SSD 128 on bigger one (want 512) and where i can buy it
View 10 RepliesAnyone can tell me how can i replace my SSD 128 on bigger one (want 512) and where i can buy it
View 10 RepliesHave been considering buying a Sony Z but wondering what the steps are to changing HDD in this laptop?
How hard is it? My vision is poor but I have changed HDDs before in laptops. Are there any photos or specific step-by-step guides that could help
I was wondering if I buy a Vaio with Windows 7, can I wipe it clean and install a different OS (Xp, or Linux) from my own CDs? Or does it only allow to install the OS that sony provided in the Recovery Partition?
View 6 Replies View RelatedI've done a search and couldn't find anything relevant.
My FZ of 28 months old has suddenly started making a faint buzzing noise from the screen.
At first I thought it was the fan, but I realized it's the LCD. I can't change the brightness for some reason using Windows 7 but it's on Max Bright. I've seen some threads of people having this problem on lowered brightness levels but this is happening on full.
When I shut the lid, the buzzing stops. It can be heard if I stand behind the laptop or place my ear beside either rear corner of the laptop.
I did a clean install of Windows 7. I did not load all that crap from the 2nd CD.I am trying to determine which Drivers I need to install.
I installed the VAIO® Event Service and Sony® Shared Library.
What is strange is, when I click on the FN button and press the increase brightness key, the brightness meter does appear on the screen, but it will not go above the lowest setting.
how can i change my speed of fan on my sony vaio FW laptop, any programs i can use.
View 9 Replies View RelatedI own a Vaio VGN-FE770g, and I have recently upgraded my RAM to 2gb plus I bought a SanDisk 4GB Extreme IV Memory Stick Pro Duo to utilize the windows 7 readyboost utility.
I thought this would help with my gaming but it isn't the case. I'm not a hardcore gamer, but I play Age of Empires III a lot and I still can't run it at any decent resolution without the screen freezing when a battle is taking place (any other time it is fine).
I looked into the Vaio's graphics capabilities and it said about the dynamic allocated RAM, which i further read can be modified (?). Could anyone offer a simple step by step how to do this? (or some insight as to whether it could/should be done at all).
Can I adjust the brightness to maximum value or any value when in stamina mode on the Z ?
View 3 Replies View RelatedI was wondering if anyone here knows how to somehow customize or some tricks to perform PgUp and PgDn key without having to press on Fn? because when I'm reading an article,
it's very troublesome to always use two hands left for the Fn key and right for the PgDn key everytime I wanted to go to the next screen.
It would be nice to move the Fn key to the right closer to the PgUp and PgDn key, so at least I only need to use my right hand to skip to the next screen.
I brought two days ago my sony vaio SR with russian vista business OS. I need to change it to english. Please help me how to do it.
View 3 Replies View RelatedI just recently purchased a used VGN-Z520n from ebay.
I noticed there is a small dent on the carbon fiber casing on the Keyboard.
I want to replace that part, but I actually like the black color on the new Z series. Is there a way I can purchase just the Black keyboard housing and replace it on my vaio?
I have recently installed Win7 with all the new drivers so everything works including the brightness adjustment in SPEED mode. However, I am trying to play som computer games in lower resolution such as 800x600. The problem when I do this is that the picture inside the game is not fully scaled over the entire screen. I have tried to use the setting "NVIDIA scaling" inside the NVIDIA control panel, but it always automatically change back to "use my display's built-in scaling". When I instead use the INTEL graphic card the screen is scaled properly over the entire screen but I want to use the NVIDIA card for games.
I am currently using Win7 pro x64 with the newest video drivers from sony support site.
My TV's native resolution is 1366 x 768. My VAIO FW-190 has Intel Chipset and both the Windows built in software and Intel provided graphic card settings software do not show the 1366x768 resolution. I can't find a way to set the Vaio's HDMI output to that resolution.
View 3 Replies View RelatedOr should I stay with vista?
View 15 Replies View Relatedhow do i change the name of this driver?
View 12 Replies View Relatedhow do i change my fan speed?
View 10 Replies View RelatedMy Laptop is Vostro 1500 with WXGA (1280x800) and my friend's ASUS G1S with 1680x1050 panel.
He doesn't like his panel because everything is too small and we decide to change panel.
Vostro panel woking great with the ASUS G1S, but ASUS panel can not work with Vostro, when turn on, the screen split 2 part in POST and change to dark when log on to windows.
We just change the panel, can not change the inverter.
How to solve this problem? Can anyone help me?
I received my Dell precision M4400 for two days now and I'm really desapointed about the quality of the screen.
I would like to know: is it possible to change this screen by a more expensive one (by paying the difference of course).
How can i change my mac id on the XPS 16?
View 7 Replies View RelatedJust picked up a 4420-5910.
Big problems...I want to switch to XP Pro.
Formatting for XP Pro but Snoop mentioned an Acer Downgrade .iso, but it was never mentioned as to what this wa, where to get it, and what it does.
I did a quick format this morning but I could not load the broadcom drivers...got a message :cannot install this...
Now I am trying a COMPLETE format and will see what happens.
I do not have a hard-wire internet connection available where I am, but I have a second laptop whichcan get what I need via wi-fi.
On my 1810TZ I have to use 2 hands to change brightness as FN is on opposite side of the keyboard.
If the right hand CTRL can be used as FN this would be a much better 1 hand action.
swapping the cpu on my acer 5101 to a dual core. The manual says in can take dual core cpu's but I swaped the mk36 single core for a tl50 1.6ghz dual core and it does not work (tried 2 different dual core cpu's). The machine does not boot. I have the newest bios 3.10a .
View 4 Replies View RelatedI am trying to get some basic information on return policies from some different places that sell HP notebooks.
Since I live over three hours driving distance one way from any major electronics store that may carry the HP Envy 15 (such as Best Buy) I am left with the only alternative to see about purchasing a computer online. I'm not completely sure, however, that it will completely fit my needs exactly. So I am trying to find out where I might be able to order an Envy 15 but also have some reassurance that if I do wish to return it for a refund I can do so within a reasonable time.
Sometimes it's hard to tell what places have for their refund policy, especially online. Again, I'd have to be sure that the place offers return for refund and not just return for replacement.
how to allocate volume up and volume down function to arrow keys (up and down) so while presing both FN key and one of the arrows i can control sound?
View 3 Replies View RelatedWith the application store for the ipod touch and iphone, full blown movie store with TV shows and rentals... the iTunes Store is kind of busting out of its name by the seams, is it not? What is needed here? a new name for iTunes that represents this? nothing splitting up iTunes into multiple apps?
View 10 Replies View RelatedThe last days I have a problem with my HDD and it needs changing. The model of my notebook is HP Pavilion dv6542ev. My problem is that I don't know what type of HDDs I can get. A friend of mine has another model and I can take his. His model is HP Pavilion dv9542ev. Can I use it?
View 2 Replies View RelatedHas anyone changed the color on their XPS M1330?
I was looking at ordering a new LCD back top cover like this: http://www.parts-people.com/index.ph...n=item&id=4240
Is it a time-consuming process or difficult?
I got my Dell 1557 about a month ago and for a while, it seemed just fine with my display brightness.
I could change it to however bright I want it to be. Then today, when I turned on my computer, my settings for my display brightness was at the highest when it normally is in the middle.
At first I thought nothing of it because I could easily change it with the F4 and F5 buttons, but after I logged on and tried to change it, nothing happened. Not even after I restarted the computer or reinstall the ATI Catalyst Center.
Specs
Windows 7 Home Premium 64 bit
Core i7-720QM
4GB DDR3 1333Mhz RAM
Full HD 1080p High Brightness LED
I got dell to send me a new back cover (Blue in color) and instead of the ccfl display i had im now useing the led lcd one.
i used the metal backets that were on my ccfl display and they fit perfect on the led display. how ever when i put it back together the bezel cuts the top of the screen off and the bottom is too low.
is there a bezel espically made just for the led display or do i need to get the correct metal brackets that hold the display into the cover??
I have a Dell 1525, bought in April 08, about 3 months ago time started to get out of sync and multiple problems with battery "plugged in not charging."
So today after charging the battery from a friends external battery charger ( friend had same problem) I was updating the BIOS to A16 from A06 and when the laptop was restarting with the bios update I get a message saying "Time of Day Clock Stopped."
My question is if I replace the CMOS battery will this solve the problem?
Looking at dell documentation from
http://support.dell.com/support/edoc....htm#wp1179839
looks tedious and time consuming but not hard .....