How to get my Acer Aspire E15 laptop (E5-571P-55TL) touchpad working again? It worked when I began using it in January and now does not, and I have been checking the FAQs and spent hours also looking for and downloading user guide info which did not work (maybe I did not EXTRACT it correctly). The little mousepad or touchpad below the physical keyboard.
I use Google Chrome, not Internet Explorer, by the way, and not the Microsoft Account login stuff, which is messing me up too, as first I had to create a password to login to my laptop,then apparently it wants me to create and use another password and login email, which apparently I did once after some problems with it,and now I cannot get it to let me login OR send me a forgotten password for Microsoft Account. It wants to call me at a number whose last 2 digits displayed are not mine!
i have an acer aspire 5335 and the touch pad aint working i have not installed anything new or used a mouse or anything i have even restored back to factory settings and i cant seem to install the drivers i have downloaded them from acer offical site but they aint working. i cant even open the synapsis to even do any test or anything and i have tried the fn+f7 and that is not doing anything.
With this process able to work with touch pad in Windows 8.1. Another problem observerd that the TP behaving abnormally. It stop sometimes and sometimes move. Checked with Windows 7 , found to be working fine
2 days ago I bought a acer notebook. The touchpad is working but not the gestures. If i go to the "mouse settings", there are no specific settings for my touchpad. Just the normal mouse settings like pointer speed. I already downloaded the 2 driver which are on the acer support site: TouchPad_Synaptics_188.8.131.52_W81x64_A and TouchPad_ELANTECH_184.108.40.206_W81x64_A. I have installed boot of them sucesfully (there was the green pick).
Also for ur info there are no warning signes for unknown devices in the device manager.
I first noticed the issue with sensitivity. The mouse was really sensitive. I then noticed that the gestures don't work either. I cannot scroll using the mouse. So I went into great depths and tried to figure out the problem (but no solution).
So I performed these steps: -Changed the pointer speed to the fastest (I didn't like the slow pointer speed). The pointer was still pretty slow. -Decided to change the TouchPad specific drivers. I go to the ELAN tab under mouse settings. I look and see that the "Options" button is greyed out. I also noticed that it said "Standard PS/2 Mouse"I decide to find the software to change the settings and located it in C:Program FilesElantech. I open ETDAniConf.exe and decide to do a test. I uncheck the right click and left click, and some other scroll settings. No avail. -Then I decide to uninstall and install the drivers. Did that. Nothing changed. Changing the tapping, button, scrolling options does nothing. The mouse settings still shows it as "Standard PS/2 Mouse" even though the tab says ELAN. -I decide to take a big step and just reinstall Windows 8 altogether using Acer Recovery. Reinstalled it, still facing the same issue. Still recognized as "Standard PS/2" mouse. -I try another way to attempt to fix the issue. I try to find the most up to date similar driver. I located on that was much newer (2013 version rather than 08.2012). Installed it, restarted computer. Still no avail. Still recognized as "Standard PS/2 Mouse".I decided to go the last route before posting the issue here. I downloaded a copy of Windows 8 Pro from Microsoft website and transferred the ISO into the bootable flash drive. I split the hard drive into a clean partition (60GB) and installed fresh Windows 8 Pro on it, without all the Acer Drivers. Of couse I was missing the network drivers so I had to go on my Desktop to download the drivers online. - I decide to first go and download the TouchPad drivers. Downloaded them, copied on a Flash Drive, ran them on the Acer laptop. Restarted computer. Still facing the issue.
I got the laptop for a good discount from my work (as a bonus of working there). It was a one time discount. As you noticed, I mentioned that it was recognizing it as "Standard PS/2 Mouse". That is the huge clue that tells me that the drivers are really buggy. The issue here is that the TouchPad drivers are not recognized like it is a TouchPad, but as a Mouse. A mouse that can only do right click, left click.
My laptop is just 4 months old bt I am already having the problem in my touchpad. It is not working. I had Windows 7 on my laptop. The touchpad was working very well and smoothly but suddenly one day, it stopped working. I thought it happened because I was using Windows 7 so I installed Windows 8.1 hoping that everything would be okay but even during the Windows installation, I had to use keyboard commands. The touchpad didn't work at all. It is not working even after the Window has been completely installed. For an alternative, I am using an USB mouse. And, do not suggest me Fn + F7 because I am not that dumb to not to know that simple trick. My keypad is not working at all!
I bought a new Acer Aspire E5-521-65BL and I'm having problems using the touchpad. It is switched on, but it isn't working very well. When I look in the device manager, I see HID-mouse twice, but I can't see a touchpad installed. I tried to download and install the synatics driver from the acer website, but I only get a message that the driver is up to date.
I rarely use the laptop's touch pad and use a wireless USB mouse. I forgot my mouse and the touch pad wouldn't work when I started up laptop. Borrowed someone's wired USB mouse and it worked, so I ran to Walmart and picked up a $7 wired mouse.
Control Panel > Programs and Features > Elan > Unistall > Reboot = Touch pad now working.
But apparently the Elan didn't reinstall as I don't see it anymore in the Programs and Features list. I thought about downloading and installing the Elan drivers, but I don't want to "fix" something that isn't broken right now.
My touchpad and keyboard quit working all of a sudden. I tried to reboot and I can't select the safe mode choice cause the arrow keys on the keyboard don't work. Some people suggested that I remove the battery and reboot, and again nothing.
I have a Acer E5-511P-C98M and the touchpad stopped working. I have seen looking through other comments about this product that going into ELAN might fix the problem. Well if that fixes the problem I can't find it under Program Files. And i have also read it might be due to some Microsoft download....
Bought an Acer E 15 ES1-512-c88m first of December. Barely got 12-20 hours of use out of it. Worked fine for 3 weeks and then all of the sudden last night I opened the lid after sitting idle plugged in for 20 hours and immediately the touchpad began acting like I was trying to highlight, drag, or draw boxes around things continuously - when all I was trying to do was move he cursor. At first I assumed it was cold or confused. Shutdowns, restarts, HID driver reinstalls did nothing. After a hour or two of troubleshooting the touchpad performance worsened, to where at this point NO clicks of taps of any kind will work, so I can't pick or select anything - and am forced to navigate menus and options by keyboard - many of which I can't get to.
Final result: all I can do now with the touchpad is move the cursor around, but nothing else. The clicker is mechanically free and never stuck.I'm disappointed because my older Acer 10" D255 from 2011 has never had any issues.Sadly the only impression I'm getting is that the circuitry for the "click" function either shorted or has somehow gone "out of spec" or "out of cal". There is no way to even find out what kind of touchpad it is, because it's not listed on any data sheets.I'm guessing the best thing to do is get it replaced free of charge because it is practically new, but I wondered if there may be any other solutions with less hassle. Who would do this - Acer or NewEgg (where I got it from)?
Aspire e15 (e5-511-p9y3) Touchpad not working on windows8.1, and I can use the cursor only with a mouse. I also installed synaptics/elantech drivers but it doesn't show scrolling option in Mouse-> Device Settings.
I have successfully installed Ubuntu on my Aspire E3 112 and after a bit of fannying around with setting a System Password in the BIOS and trusting the Grub2 EFI settings, I have a stable system that boots in to both Ubuntu and Windows 8.1 with Bing.
BUT , The right click doesn't work on the Synaptic Touchpad. No matter where I click on the touchpad it is recognised as a left click.
I've tried installing the GPointing Device Setting but there aren't any config settings for right click.
I've heard that Synaptics have a product (Synaptics Gesture Suite for Linux - SGS-L) but it's only available to OEM suppliers.
I just bought an ACER E5-771G-54N6 and after 2 days my touchpad just stop working (Win 8.1 , 64-bit). This is obviously a software (driver) issue, and after researching and finding out that a Windows reisntall is the only solution, I find that hard to believe that this can't be fixed through a patch. These type of problems shouldn't be occurring on brand new laptops.
I just got this laptop for a month and the touchpad is making me frustrating. The cursor lags, the drag function sometimes not working, the primary and secondary buttons interchange (the settings are not changed), and the left or right-click does not work properly. I got downloading the drivers of the mouse to restoring the pc to its original settings. Currently, the bios is updated but it is still happening though the update made the touchpad to become more responsive than before.
I own a Acer Aspire V5 laptop and noticed a problem with the delete key recently while I was using Microsoft Office Word. Whenever I pressed the delete key it wouldn't delete what I selected and instead opened up the Key Tips in the ribbon. After having my son look at it he couldn't figure out the problem as well, but he noticed that the Delete key was functioning in the same as the Alt key. How to get delete key working correctly again?
I bought new HP G4-1037 tu laptop............ I installed Synaptics version 220.127.116.11..........All things are working properly but the ON/OFF button on top left with indication light is not working .......How i can activate this feature of touchpad..
I can't seem to load the Touchpad Software fot the Acer 5630 Laptop ? Do I use the Alps or the Synaptics Software ? When I load the Alps I get pop-ups on startup that don't go away asking me if I want to start Apoint.exe and other files. I uncheck the pop-up but it still keeps coming back ? When the computer fully loads and I right mouse click on the Touchpad Icon in the right bottom tray it shows up like regular mouse software. It used to have an area asking me if I want to shut the touchpad. Not anymore. As for the Synaptics Software if fails when I try to load it. Do you have a solution to this problem ? I do use a USB Mouse and never use the Touchpad.
about 2 months ago i bought an Acer 5920G, a week or so ago suddenly the touchpad stopped working, i dont recall how it happened, i think i just booted Windows Vista as i usually do and the touchpad didnt work when i tried to click my user name so i could enter my password to logon.
I thought maybe the driver had gone bad so i rebooted and booted Windows XP( on a different partition) and in windows xp the touchpad also didnt work anymore.
Is this a hardware failure? Or are there other possibilities? I tried removing the driver and reinstalling, but it still didnt work.
The laptop just does not work with the battery in. It will boot up but the keyboard and touchpad do not work. Taking out the battery works fine...but my question is, will I ever be able to use the computer with a battery in it? Do I need a new battery? Or is my laptop forever a battery-less one?
I turned laptop on today and the touchpad is just not working. Has this happened to anyone else? I looked for drivers but only found vista ones which I installed but still not working. Thankfully I have a bluetooth mouse but it is not that good and I like to use the touchpad.
Using windows 7 32 bit. I might install the OS again but does this sound like a hardware failure?