I recently installed the "new" drivers for the windows 8 upgrade for the Aspire 5250. (After upgrading I did not install the drivers until recently.) Since I installed the driver, the side-scroll on the touchpad isn't working. Is there a way to turn it on?
I got this Aspire 5560G about three years ago and it was running Windows 7. I recently upgraded to Windows 8.1 and have managed to find and install all the drivers I need for my lapop to run smoothly, except for the touchpad.
Although it works for moving the cursor and double-tapping to open files etc, it doesn't work to scroll pages. I have tried downloading the latest driver on the Acer Drivers page but it doesn't change any features.
The entertainment part on the laptop on the left hand side the touchpad has somewhat frozen so it is impossible to use, it has put itself ontohold somehow and now will not work, i have attempted restarting the laptop and shutting it down completly still the touch pad will not work.
I have a problem with my TouchPad , the scrolling of right side has been stopped working ... I've installed all drivers that belong to touchpad , but it doesn't work as well as before , mean it doesn't work even ( the right side ) , i just can use my tow fingers for scrolling, but the right side was so much better ..
After updating the touchpad drivers to 188.8.131.52 A03, there has been an issue with two-finger scrolling.
When I lift my fingers off the touchpad, it jumps to the bottom of the page. This is very frustrating as I have to scroll back up to find my place. This happens with Chrome, Word, IE, Firefox, everything.
The same issue is also plaguing this user: [URL] .....
Just got a brand new laptop, Dell Inspiron 11 3137, and updated to windows 8.1. The touchpad does not work properly now; gestures/scrolling/pointer not working. I've spent over 16 hours getting windows 8.1 installed and then troubleshooting this issue. I've contacted Dell; updated the driver from Dell, even tried installing the latest driver from Synaptic. I even tried setting the Synaptic app to run under the windows 8 version.
Touchpads have been around a long time. It's the last thing I expect not to work properly.
At this point I am ready to send the laptop back and call it quits on windows.
The Fn+F3 combination on my Acer Aspire One D270 doesn't work. I have wireless internet but the Wi-Fi led is red and I can't turn it on and off. Also the combination Fn+left/right arrow which makes the screen dimmer or brighter doesn't work either. One more thing: does this model have a bluetooth device? I should mention that the OS is Windows 7 Ultimate 32-bit.
Basically the Fn Button, Left, Right, Up, Down buttons are all working fine. I can adjust the volume of the notebook, but I can't however adjust the brightness of the screen. There is no brightness setting in my notebook whatsoever! Am I missing the brightness driver? what is the name of the brightness driver? Or is it something else. Taking into account that I have decrease/increase brightness symbols on the left/right buttons respectively.
I did a complete restore of windows 7 starter on acer aspire one d270-1410. install hangs up on office 2010, currently for over 8 hours, without going any further. it's a vicious circle. can't get past office 2010 install. i have no cd drive.
i have an acer aspire 5335 and the touch pad aint working i have not installed anything new or used a mouse or anything i have even restored back to factory settings and i cant seem to install the drivers i have downloaded them from acer offical site but they aint working. i cant even open the synapsis to even do any test or anything and i have tried the fn+f7 and that is not doing anything.
With this process able to work with touch pad in Windows 8.1. Another problem observerd that the TP behaving abnormally. It stop sometimes and sometimes move. Checked with Windows 7 , found to be working fine
2 days ago I bought a acer notebook. The touchpad is working but not the gestures. If i go to the "mouse settings", there are no specific settings for my touchpad. Just the normal mouse settings like pointer speed. I already downloaded the 2 driver which are on the acer support site: TouchPad_Synaptics_184.108.40.206_W81x64_A and TouchPad_ELANTECH_220.127.116.11_W81x64_A. I have installed boot of them sucesfully (there was the green pick).
Also for ur info there are no warning signes for unknown devices in the device manager.
How to get my Acer Aspire E15 laptop (E5-571P-55TL) touchpad working again? It worked when I began using it in January and now does not, and I have been checking the FAQs and spent hours also looking for and downloading user guide info which did not work (maybe I did not EXTRACT it correctly). The little mousepad or touchpad below the physical keyboard.
I use Google Chrome, not Internet Explorer, by the way, and not the Microsoft Account login stuff, which is messing me up too, as first I had to create a password to login to my laptop,then apparently it wants me to create and use another password and login email, which apparently I did once after some problems with it,and now I cannot get it to let me login OR send me a forgotten password for Microsoft Account. It wants to call me at a number whose last 2 digits displayed are not mine!
I first noticed the issue with sensitivity. The mouse was really sensitive. I then noticed that the gestures don't work either. I cannot scroll using the mouse. So I went into great depths and tried to figure out the problem (but no solution).
So I performed these steps: -Changed the pointer speed to the fastest (I didn't like the slow pointer speed). The pointer was still pretty slow. -Decided to change the TouchPad specific drivers. I go to the ELAN tab under mouse settings. I look and see that the "Options" button is greyed out. I also noticed that it said "Standard PS/2 Mouse"I decide to find the software to change the settings and located it in C:Program FilesElantech. I open ETDAniConf.exe and decide to do a test. I uncheck the right click and left click, and some other scroll settings. No avail. -Then I decide to uninstall and install the drivers. Did that. Nothing changed. Changing the tapping, button, scrolling options does nothing. The mouse settings still shows it as "Standard PS/2 Mouse" even though the tab says ELAN. -I decide to take a big step and just reinstall Windows 8 altogether using Acer Recovery. Reinstalled it, still facing the same issue. Still recognized as "Standard PS/2" mouse. -I try another way to attempt to fix the issue. I try to find the most up to date similar driver. I located on that was much newer (2013 version rather than 08.2012). Installed it, restarted computer. Still no avail. Still recognized as "Standard PS/2 Mouse".I decided to go the last route before posting the issue here. I downloaded a copy of Windows 8 Pro from Microsoft website and transferred the ISO into the bootable flash drive. I split the hard drive into a clean partition (60GB) and installed fresh Windows 8 Pro on it, without all the Acer Drivers. Of couse I was missing the network drivers so I had to go on my Desktop to download the drivers online. - I decide to first go and download the TouchPad drivers. Downloaded them, copied on a Flash Drive, ran them on the Acer laptop. Restarted computer. Still facing the issue.
I got the laptop for a good discount from my work (as a bonus of working there). It was a one time discount. As you noticed, I mentioned that it was recognizing it as "Standard PS/2 Mouse". That is the huge clue that tells me that the drivers are really buggy. The issue here is that the TouchPad drivers are not recognized like it is a TouchPad, but as a Mouse. A mouse that can only do right click, left click.
My laptop is just 4 months old bt I am already having the problem in my touchpad. It is not working. I had Windows 7 on my laptop. The touchpad was working very well and smoothly but suddenly one day, it stopped working. I thought it happened because I was using Windows 7 so I installed Windows 8.1 hoping that everything would be okay but even during the Windows installation, I had to use keyboard commands. The touchpad didn't work at all. It is not working even after the Window has been completely installed. For an alternative, I am using an USB mouse. And, do not suggest me Fn + F7 because I am not that dumb to not to know that simple trick. My keypad is not working at all!
I bought a new Acer Aspire E5-521-65BL and I'm having problems using the touchpad. It is switched on, but it isn't working very well. When I look in the device manager, I see HID-mouse twice, but I can't see a touchpad installed. I tried to download and install the synatics driver from the acer website, but I only get a message that the driver is up to date.
I rarely use the laptop's touch pad and use a wireless USB mouse. I forgot my mouse and the touch pad wouldn't work when I started up laptop. Borrowed someone's wired USB mouse and it worked, so I ran to Walmart and picked up a $7 wired mouse.
Control Panel > Programs and Features > Elan > Unistall > Reboot = Touch pad now working.
But apparently the Elan didn't reinstall as I don't see it anymore in the Programs and Features list. I thought about downloading and installing the Elan drivers, but I don't want to "fix" something that isn't broken right now.
My touchpad and keyboard quit working all of a sudden. I tried to reboot and I can't select the safe mode choice cause the arrow keys on the keyboard don't work. Some people suggested that I remove the battery and reboot, and again nothing.
I have a Acer E5-511P-C98M and the touchpad stopped working. I have seen looking through other comments about this product that going into ELAN might fix the problem. Well if that fixes the problem I can't find it under Program Files. And i have also read it might be due to some Microsoft download....